Astria Fireplaces POLARIS Instruction Sheet
- Category
- Fireplaces
- Type
- Instruction Sheet
This manual is also suitable for
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor
for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Innovative Hearth Products (IHP)
Printed in U.S.A. © 2006 IHP
These brushed stainless hood trim kits (36" hood kit - Catalog no. H4818
and 42" hood kit - Catalog no. H4819) may be used with outdoor gas
fireplace Models Polaris™ 36/42, VRE43 36/42, E36ODG and E42ODG.
These kits contain one brushed stainless hood, two (2) screws and these
instructions.
To install the hood trim kit, refer to Figure 1 and follow the steps
outlined below:
Turn off the fireplace and allow it to cool before proceeding.
Place the hood lip under the face top opening, as shown in
Figure 1 - Step 1. Attach the hood with two (2) screws, one
each side, as shown in Figure 1 -. Completed installa-
tion is shown in Figure 1.
Figure 1
Place The Hood
Lip Up And
Under The Face
Top Opening
Hood Lip
Attaching Screw
(Seen From Below)
Step-1
Step-2 Step-3
Face Top
Place The Hood
Lip Up And
Under The Face
Top Opening
Hood Lip
Attaching Screw
(Seen From Below)
Step-1 Step-2 Step-3
Face Top
HEARTH PRODUCTS
KITS AND ACCESSORIES
-
1
Astria Fireplaces POLARIS Instruction Sheet
- Category
- Fireplaces
- Type
- Instruction Sheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Astria Fireplaces Valiant OD Operating instructions
-
-
-
-
-
-
-
Other documents
-
Superior Fireplaces VRE4200 Operating instructions
-
-
-
-
-
Superior VRE4036WH Installation And Operation Instructions Manual
-
Astria ValiantOD36P3 Installation And Operation Instructions Manual
-
Astria Valiant36ZP2 Installation And Operation Instructions Manual
-
-
