Page is loading ...
IB899
Intel® Braswell
USER’S MANUAL
Version 1.1
ii
IB899 User’s Manual
Acknowledgments
AMI BIOS is a trademark of American Megatrends Inc.
PS/2 is a trademark of International Business Machines
Corporation. Intel and Luna-Pier are registered
trademarks of Intel Corporation. Microsoft Windows is a
registered trademark of Microsoft Corporation. Winbond is
a registered trademark of Winbond Electronics
Corporation. All other product names or trademarks are
properties of their respective owners.
IB899 User’s Manual iii
Table of Contents
Introduction ....................................................... 1
Checklist .............................................................................. 2
IB899 Specifications ........................................................... 3
Board Dimensions ............................................................... 5
Installations ....................................................... 6
Installing the Memory ......................................................... 7
Setting the Jumpers ............................................................. 8
Connectors on IB899 ......................................................... 15
BIOS Setup ....................................................... 33
BIOS Introduction ..................................................................... 34
BIOS Setup ................................................................................. 34
Advanced Settings ..................................................................... 35
CSM Configuration ................................................................... 43
Chipset Settings ......................................................................... 45
Security Settings ........................................................................ 46
Boot Settings .............................................................................. 47
Save & Exit Settings ................................................................. 48
Drivers Installation ...................................... 49
Intel Chipset Software Installation Utility ......................... 50
VGA Drivers Installation .................................................. 53
Realtek HD Audio Driver Installation............................... 55
LAN Drivers Installation ................................................... 56
TXE Drivers Installation ................................................... 59
Appendix ........................................................... 61
A. I/O Port Address Map ................................................... 61
B. Interrupt Request Lines (IRQ) ...................................... 62
C. Watchdog Timer Configuration .................................... 63
iv IB899 User’s Manual
This page is intentionally left blank.
INTRODUCTION
IB899 User’s Manual 1
Introduction
IB899 is a 3.5-inch Disk Size SBC (102mm x 147mm) that comes with the
Intel® Pentium® N3700 \ N3710 and Celeron® N3000 \ N3010 series
processor. It has two DDR3L SO-DIMM sockets supporting up to 8GBs of
system memory. It also features the Intel® Gen8-LP graphics engine with
interface for CRT, DVI-D and 24-bit dual channel LVDS displays. The
platform provides four connectors of USB 3.0 at the board edge and USB
2.0 two ports with pin header. Two SATA III ports are included.
IB899 Features
- 3.5-inch Disk Size SBC, 142mm x 102mm
- Onboard Intel® Pentium® N3700 \ N3710 series
Celeron® N3000 \ N3010 series
- Two DDR3L SO-DIMM sockets, DDR3L-1600, Max. 8GB
- Intel® Gen8-LP graphics for CRT, DVI-D interface
- 24-bit dual channel LVDS interface
- Dual Intel I211-AT PCIe Gigabit LAN
- 4 x USB 3.0 on edge, 2 x USB 2.0 on board support
- Two SATA III, 2 x COM ports
- Digital I/O 4-in / 4-out, 1 x Full-size Mini-PCIe, 1 x Half-size Mini-PCIe
- Watchdog Timer, iSMART, RoHS compliance
INTRODUCTION
2 IB899 User’s Manual
Checklist
Your IB899 package should include the items listed below.
3.5-inch Disk Size SBC
This User’s Manual
1 CD containing chipset drivers and flash memory utility
Serial ATA cable
I/O shield
INTRODUCTION
IB899 User’s Manual 3
IB899 Specifications
Product Name
IB899F-370(N3700 onboard)
IB899F-371(N3710 onboard)
IB899F-300(N3000 onboard)
IB899F-301(N3010 onboard)
IB899A-370 (N3700 onboard, w/MicroSD & TPM 2.0)
IB899A-371 (N3710 onboard, w/MicroSD & TPM 2.0)
**Default silk screen model # on PCB is IB899F**
Form Factor
3.5”
SoC Type/Speed
14nm Technology Process, FCBGA1170, Package= 25mm x 27mm
- Pentium® N3700 QC, up to 2.4Ghz , TDP=6W (C0-stepping, SR2A7)
- Pentium® N3710 QC, up to 2.56Ghz , TDP=6W (D1-stepping, SR2KL)
- Celeron® N3000 DC, up to 2.08GHz, TDP=4W (C0-stepping, SR29J)
- Celeron® N3010 DC, up to 2.24GHz, TDP=4W (D1-stepping, SR2KM)
Cache
2MB
BIOS
AMI BIOS
Memory
Intel® Pentium®/Celeron® SoC integrated memory controller
2 x DDR3 SO-DIMM socket, Support DDR3L (1.35V) only
Max. memory to 8GB (Non-ECC, Un-buffered)
VGA
Intel® Pentium®/Celeron® SoC integrated Gen 8 graphics
Support 3 x independent displays, DX11.1 (DX12 for Win 10) & OpenGL 4.2
- VGA x 1: Thru NXP PTN3392 DP to VGA **1920x1200 @ 60 Hz**
(C0133392BSF415000P)
- DVI-D x 1 ** 2560x1600@ 60 Hz**
- LVDS: 24-bit dual channel via NXP PTN3460 thru eDP
**1920x1200 @ 60 Hz** (C01Z3460BSF612000P)
LAN
Intel® I211-AT PCIe Gigabit LAN x 2
USB (Universal
Serial Bus)
Intel® Pentium®/Celeron® SoC built-in USB 3.0 host controller, support 4 ports
- Edge I/O x 4
Intel® Pentium®/Celeron® SoC built-in USB 2.0 host controller with USB hub
Renesas uPD720115K8-611-BAK-A(C013720115K861000P)
For total 4 ports x USB 2.0
- 2 Ports thru pin header
- 2 Ports thru Mini PCIe slot
Serial ATA Ports
Intel® Pentium®/Celeron® SoC built-in SATA III controller, supports 2 ports
Audio
Intel® Pentium®/Celeron® SoC built-in HD Audio controller + Realtek ALC662
Codec
LPC I/O
Nuvoton NCT5523D, Ver. C [64-pin LQFP, 7x7x1.4mm]
COM #1 (RS232/422/485)
- With EXAR SP339 (C014339EER1L29000P) x 1 for jumper-less
- Support ring-in with power @500 mA (selectable for 5V or 12V)
COM #2 (RS-232 only)
[Hardware Monitor]
2 x Thermal inputs; 2 x Voltage monitoring
Digital IO
4 in & 4 out
Expansion Slots
Mini PCIe socket x 2
Full-sized x1 : with USB 2.0 signal + support mSATA(via NXP switch)
Half-sized x1: with USB 2.0 signal
Edge Connectors
DVI-D x 1 for DVI
COM x 1 (RJ45 connector type)
RJ45 x 2 for LAN 1 & 2
USB 3.0 stack connector x 1 for 2 ports (from SoC)
USB 3.0 stack connector x 1 for 2 ports (from SoC)
INTRODUCTION
4 IB899 User’s Manual
Onboard
Header/
Connector
DF11 2 x 4 pins header x 1 for 2 x USB 2.0
DF20 socket connector x 2 for 24-bit dual channel LVDS
(C1220220020220300P)
4 pins box header x 1 for backlight/brightness control (PWM mode)
DF11 2 x 6 pins box header x1 for Audio
DF11 2 x 8 pins box header x 1 for VGA
DF11 2 x 5 pins box header x 1 for COM2
2 x 5 pins header x 1 for LPC(80-port card debugging purpose)
Mini PCI-e(1x) connector x 2
SATA III connector x 2 for SATA device(BLUE color)
4-pins power connector x 2 (JST type, For SATA III device)
2 x 4 pins pin-header x 1 for front I/O ( RST, PWR, LEDs)
2-pins connector x 1 for power input (C12101112202101HAP)
Micro SD slot x 1 @ solder side (IB899A only)
BR2032 w/ adhesive tape = C272113012032B100P+
M1401020010010100
Watchdog
Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
DC Input
9V~+24V (±5 % tolerance)
TPM 2.0
Infineon SL9665 (IB899A-370 only) [C01Z9665TT2007000P]
Infineon SL9665 (IB899A-371 only) [C01Z9665TT2007000P]
Others
iSMART 3.2
OS support
** Please note the priority**
- Windows 8.1(64-bit)
- Windows 7(64-bit,refer to Intel #558302 EHCI OS USB installation
guide)
- Fedora (Installation)
- Ubuntu (Installation)
- Windows 10 (32-bit / 64-bit)
- Embedded OS will be test by request
RoHS / REACH/
LVD /CE
Yes / Yes / Yes / Class B
Operating
system
0ﾟC to +60ﾟC
Board Size
102mm x 147mm
INTRODUCTION
IB899 User’s Manual 5
Board Dimensions
INSTALLATIONS
6 IB899 User’s Manual
Installations
This section provides information on how to use the jumpers and connectors
on the IB899 in order to set up a workable system. The topics covered are:
Installing the Memory ......................................................................... 7
Setting the Jumpers ............................................................................. 8
Connectors on IB899 ........................................................................ 15
INSTALLATIONS
IB899 User’s Manual 7
Installing the Memory
The IB899 board supports two DDR3L-1600 memories.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned with
that on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of the
slot close to hold the DDR3 module in place when the DDR3 module
touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
INSTALLATIONS
8 IB899 User’s Manual
Setting the Jumpers
Jumpers are used on IB899 to select various settings and features according to
your needs and applications. Contact your supplier if you have doubts about
the best configuration for your needs. The following lists the connectors on
IB899 and their respective functions.
Jumper Locations on IB899 ................................................................... 9
JP1: LCD Backlight Voltage Selection ................................................ 10
JP2: Clear RTC .................................................................................... 10
JP3: Clear CMOS Setting .................................................................... 11
JP4: LCD Panel Voltage Selection ...................................................... 11
JP5: COM1 Ring Pin Function Selection............................................. 12
JP6: Security Flash Descriptors (For Factory Use Only) ..................... 13
JP7/JP8: OS Type Selection ................................................................. 13
INSTALLATIONS
IB899 User’s Manual 9
Jumper Locations on IB899
INSTALLATIONS
10 IB899 User’s Manual
JP1: LCD Backlight Voltage Selection
JP1
Setting
+3.3V
+5V
JP2: Clear RTC
JP2
Setting
Save RTC*
Clear RTC
*: Default Setting
1 2
3
1
INSTALLATIONS
IB899 User’s Manual 11
JP3: Clear CMOS Setting
JP3
Setting
Save CMOS*
Clear CMOS
*: Default Setting
JP4: LCD Panel Voltage Selection
JP4
LCD Panel Power
+3.3V*
+5V
*: Default Setting
1 3
3
1
INSTALLATIONS
12 IB899 User’s Manual
JP5: COM1 Ring Pin Function Selection
JP5
Setting
+12V
Ring*
+5V
*: Default Setting
2
1
6
5
INSTALLATIONS
IB899 User’s Manual 13
JP6: Security Flash Descriptors (For Factory Use Only)
JP6
Setting
Open*
Close
*: Default Setting
JP7/JP8: OS Type Selection
JP7/JP8
Setting
Win8/Android
Linux
DOS, Win 7 Legacy
N/A
2
1
2 2
1 1
INSTALLATIONS
14 IB899 User’s Manual
*: Default Setting
INSTALLATIONS
IB899 User’s Manual 15
Connectors on IB899
The connector on IB899 allows you to connect external devices such as
keyboard, floppy disk drives, hard disk drives etc. The following table lists the
connectors on IB899 and their respective functions.
Connector Locations on IB899 ............................................................. 16
CN1/CN2: Gigabit LAN Port #2 / #1 Connectors ................................ 17
CN1: Port #2 CN2: Port #1 ............................................... 17
CN3/CN4: USB 3.0 Connectors ........................................................... 17
CN5: COM1 in RJ45 10P10C Type Connector.................................... 18
CN6: DVI-D Connector ....................................................................... 19
CN7: Micro SD Connector (On Bottom Side)...................................... 20
J1: Power Input Connector ................................................................... 20
J2/J5: Dual Channel LVDS Connector ................................................. 21
J2 (Channel A) Pin Assignment ..................................................................... 21
J5 (Channel B) Pin Assignment ...................................................................... 21
J3: Backlight LCD Panel Power Connector ......................................... 22
J4: Front Panel Pin Header ................................................................... 22
J6: SPI Flash Burn-in Pin Header[ ......................................................... 23
J7/J12: Serial ATA III Connectors ....................................................... 24
J8/J9: SATA HDD Power Connectors ................................................. 24
J10: Half-sized Mini PCIe Sockets ....................................................... 25
J11: Full-sized Mini PCIe Socket ......................................................... 25
J13/J14: DDRIII SO-DIMM Sockets ................................................... 27
J15: MCU Burn-in Connector .............................................................. 28
J16: Battery Connector ......................................................................... 28
J17: Digital I/O Connector ................................................................... 29
J18: LPC Debug Connector .................................................................. 29
J19: VGA Connector ............................................................................ 30
J20: COM2 Connector .......................................................................... 31
J21: Audio Connector ........................................................................... 31
F_USB1: USB2.0 Connector ................................................................ 31
INSTALLATIONS
16 IB899 User’s Manual
Connector Locations on IB899
/
