Milwaukee 48-22-8429 Template

Type
Template
CRE ATE
A DIVIDER
FOR YOUR
PACKOUT
XL
TOOL BOX
48-22-8429
Directions:
1. Print template on 8.5" x 11" paper and confirm
page scaling is marked “actual size” or “100%.
2. Cut along black dotted lines.
3. Tape paper together while matching up the
MILWAUKEE® PACKOUT logo.
4. Trace template on 1/4" plywood.
5. Confirm the markings dimensions
match the below reference.
6. Cut plywood along markings.
7. Slide plywood into notches identified in photo below.
14-3/8"
18-9/16"19-1/4"
1 OF 2 DIVIDER TEMPLATES
TEMPLATE DIMENSIONS
THIS DIAGRAM NOT TO SCALE
A
C
B
D
1 of 2
A
B
C
CONFIRM
To ensure this template has printed out to
scale, this area should be the same size as
a credit card.
If not, please be sure that any page scaling is
turned off in page setup or printer settings.
2-1/8" x 3-3/8"
D
Directions:
1. Print template on 8.5" x 11" paper and confirm
page scaling is marked “actual size” or “100%.
2. Cut along black dotted lines.
3. Tape paper together while matching up the
MILWAUKEE® PACKOUT logo.
4. Trace template on 1/4" plywood.
5. Confirm the markings dimensions
match the below reference.
6. Cut plywood along markings.
7. Slide plywood into notches identified in photo below.
12-9/16"
12"
13-3/4"
TEMPLATE DIMENSIONS
THIS DIAGRAM NOT TO SCALE
A
C
B
D
CRE ATE
A DIVIDER
FOR YOUR
PACKOUT
XL
TOOL BOX
48-22-8429
2 OF 2 DIVIDER TEMPLATES
2 of 2
A
B
C
CONFIRM
To ensure this template has printed out to
scale, this area should be the same size as
a credit card.
If not, please be sure that any page scaling is
turned off in page setup or printer settings.
2-1/8" x 3-3/8"
D
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Milwaukee 48-22-8429 Template

Type
Template

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI