atomi Vanity Mirror Plus Qi Charger and Speaker User manual

atomi
Brand
atomi
Model
Vanity Mirror Plus Qi Charger and Speaker
Category
Docking speakers
Type
User manual
Date Code: 10/21
User Manual
Vanity Mirror +
Qi Charger + Speaker
9 inch Vanity Mirror + 15W Qi Wireless Charger
+ 5W BluetoothTM Speaker
Need assistance?
WE
CAN
HELP
DO NOT RETURN THIS
PRODUCT TO THE STORE
Call 1-800-757-1440
Mon-Fri 9:00 a.m. - 5:00 p.m. EST (US)
or email us at info@atomiusa.com
WE APPRECIATE FEEDBACK!
Please allow our customer service team to help
with any issues before you leave a review.
/atomismainc /atomi_sma @atomi.sma
IMPORTANT SAFEGUARDS
When used in the directed manner, this unit has been designed
and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire hazards.
READ ALL INSTRUCTIONS BEFORE USING.
GENERAL
1. Water and Moisture – The unit should not be used near running
water or in humid environments. For example, near a bathtub or
steaming shower, washbowl, kitchen sink, laundry tub, swimming
pool or wet basement.
2. Ventilation – The unit should be situated so that its location or
position does not inteere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar
suace that may block ventilation openings. Also, it should not
be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation
openings.
3. Heat – The unit should be situated away from heat sources such
as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat. Never place the mirror in or expose
the mirror to direct sunlight. Le unaended, the sun’s rays can
reflect to become focused and cause excessive heat and/or fire.
4. Power Sources – The unit should be connected to a power supply
only of the type described in the operating instructions or as
marked on the appliance.
5. Power Cable Protection – Power supply cables should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear
area from where the cable exits the unit to where it is plugged
into an AC socket.
6. Cleaning – The unit should be cleaned only with damp cloth.
7. Objects and Liquid Entry – Care should be taken so that objects
do not fall and liquids are not spilled into any openings or vents
located on the product.
8. Lightning and Power Surge Protection – Unplug the unit from the
wall socket during a lightning storm or when it is le unaended
and unused for long periods of time. This will prevent damage to
the product due to lightning and power-line surges.
9. Overloading – Do not overload wall sockets, extension cords, or
integral convenience receptacles as this can result in a risk of fire
or electric shock.
10. Periods of Non-Use – If the unit is to be le unused for an
extended period of time, such as a month or longer, the power
cable should be unplugged from the unit to prevent damage or
corrosion.
SAVE THESE INSTRUCTIONS
Please exercise caution when in use as the mirror is made of glass.
1 2
3 4
Thank you for purchasing the Atomi
Vanity Mirror + Qi Charger + Speaker
The Atomi Vanity Mirror + Qi Charger + Speaker doubles
as a vanity mirror and Bluetooth™ speaker. Equipped
with natural daylight LED lighting, it flawlessly magnifies
your reflection while streaming your favorite playlist.
What’s Inside
Features of the Atomi
Vanity Mirror + Qi Charger + Speaker
Vanity Mirror +
Qi Charger + Speaker
Power
Supply
Speaker
High-quality
speaker for
wireless streaming.
Adjustable for
optimal viewing
Position the mirror to peect
angles for applying makeup,
lighting selfies, and more.
7x Detachable
Makeup Mirror
Convenient magnetic
7x detail mirror is
easily detachable.
LED Indicator
Indicates Qi power status.
Bluetooth™ Speaker Specs
Speaker: 5 Wa hi-fi driver with passive subwoofer
Bluetooth™: 4.1 - 33 . range
Charge Station Specs
Power Supply
Input:100-240V~50/60Hz 1A Output: 12VDC 3A
LED Vanity Mirror+Speaker
Baery: 3.7VDC 2000mAh 7.4Wh Input: DC12V3A
USB Output: DC5V2.4A, 12W Wireless Output: 15W
Sma Charge
USB Po
Power
input
Wireless Charging
15W Qi-ceified
wireless charger
seamlessly built into
the base.
LED Lighting
Full spectrum
lighting 300 LUX
with hi/med/low
brightness modes.
5
NOTE:
1. Bluetooth™ speaker will automatically power o aer 10 minutes of
inactivity.
2. When the baery’s voltage is less than 3.1V, the Bluetooth™ speaker
will automatically power o.
3. When LED Vanity Mirror + Speaker is plugged into power source, the
speaker will automatically use DC power.
Controls LED Indicator
Power / Bluetooth™ Indicator Light
1. Power: When LED Vanity Mirror + Speaker is plugged
in, the LED indicator will turn red (charging). When the
baery is full, the LED indicator will turn o.
2. Bluetooth™: LED indicator flashes blue when the
speaker is in pairing mode. When speaker is
successfully paired, LED indicator will turn solid blue.
Qi Charging Indicator Light
1. Qi Charging: LED indicator turns blue when your
mobile device is charging. When the baery is full, the
LED indicator will turn green and automatically turn o
aer a few seconds.
Volume Up
Press to increase
speaker volume.
Volume Down
Press to decrease
speaker volume.
Qi Charging Indicator Light
(On the front)
Power ON/OFF
Press and hold for 3
seconds to turn ON/OFF
Bluetooth™ speaker.
Power / Bluetooth™
Indicator Light
LED Light
Press and hold for 3 seconds to turn ON the light.
Press again to switch light intensity (3 modes).
Press and hold for 3 seconds to turn OFF the light.
6
Microphone
Press power buon to
answer incoming calls.
Press the power
buon twice to refuse
incoming calls.
To call the last number,
press the power
buon twice.
7 8
2. Once turned on, the Vanity Mirror + Qi Charger +
Speaker should appear on your device’s Bluetooth™ list.
If a message such as “Not Paired” or “Not Connected”
appears, select "Vanity Speaker Mirror" to connect.
3. Once pairing is successful, you will see a solid
(non-flashing) blue light.
Bluetooth™ Setup
Bluetooth
Seings
Bluetooth
My Car
Vanity Speaker Mirror
MY DEVICES
OTHER DEVICES
2.
3.
1.
Any Bluetooth™-enabled device (4.1) can be paired with
the Atomi Vanity Mirror + Qi Charger + Speaker.
1. Press and hold the power buon for 3 seconds to turn
speaker on. When the Vanity Mirror + Qi Charger + Speaker
is turned on, the indicator stas flashing blue. The speaker
will then enter into auto-pairing mode and aempt to pair
with a nearby Bluetooth™ device.
910
4. You may now play music on the LED Vanity Mirror +
Speaker through your device. The next time the speaker
is powered on, it will automatically link with the last
paired Bluetooth™ device. To pair with a new device,
follow steps 1-3.
NOTE: A Bluetooth™ device must be within 33 feet LED Vanity Mirror +
Speaker to be paired with it.
4.
Charging with the Qi pad
Place your device on the designated charging
area of your Vanity Mirror. Charging will begin on
contact. The indicator light will turn on blue while
the device is charging.
11 12
Press and hold for 3 seconds to turn ON the light.
Press again to switch light intensity (3 modes).
Press and hold for 3 seconds to turn OFF the light.
Light Control
Charging with the USB po
Connect your device to the USB po on the back
of the Vanity Mirror + Qi Charger + Speaker using
a charging cable (not included).
13 14
When LED light is flashing red, the LED Vanity Mirror +
Speaker has 10% baery le and should be
connected to the AC adapter.
When charging by USB, the mirror must be connected
to the power cord to enable USB charging.
Charging your LED
Vanity Mirror + Speaker
15 16
FCC Information
This equipment complies with FCC RF radiation exposure
limits set foh for an uncontrolled environment.
Operation is subject to the following two conditions:
(1) This device may not cause inteerence and (2) This
device must accept any inteerence received, including
inteerence that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the pay responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Pa 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful inteerence in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
inteerence to radio communications.
However, there is no guarantee that inteerence will not
occur in a paicular installation. If this equipment does
cause harmful inteerence to radio or television reception,
which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the inteerence
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
For questions or concerns, email us at info@atomiusa.com
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001
atomi™ is a trademark of Atomi Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from the date of purchase
against defects in material and workmanship.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

atomi Vanity Mirror Plus Qi Charger and Speaker User manual

atomi
Brand
atomi
Model
Vanity Mirror Plus Qi Charger and Speaker
Category
Docking speakers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents