2. Woodson
  3. W.HLU1

Woodson W.HLU1 User manual

  • Hello, I'm your chat assistant. I've analyzed the provided user manual for the Heat Lamp Cover. This document outlines the installation and cleaning procedures, emphasizing safety during maintenance. I'm ready to answer any questions you have about the device described in the document.
  • What should I do before cleaning the heat lamp cover?
    What should I use to clean the heat lamp cover?
    What should I use to dry the heat lamp cover?
Revision Date: 24/07/2020
Installation
Cleaning
1. Remove protective film from heat lamp cover
2. Slide heatlamp cover over the heatlamp
Read these instructions carefully and retain for future reference.
1. Turn off heat lamps and allow to cool
2. Once cool remove heat lamp cover and clean with warm (not hot) soapy water and a sponge
3. Ensure all due care is taken when cleaning the glass
4. Thoroughly dry the heatlamp cover with a soft cloth
5. Re-install heatlamp cover
Woodson Heat Lamp Cover Installation
/