MORryde JP54-010 Installation guide

Brand
MORryde
Model
JP54-010
Type
Installation guide
MOUNTING THE (JP54-010)
OFFROAD JACK CARRIER
BACKER CLIP
HEAVY DUTY
HINGE
(SOLD SEPERATLY)
TOP
CB ANTENNA
MOUNT LOCATION
UPPER BRACKET
LOWER TRAY
JAM NUT
LOCK NUT
CARRIAGE
BOLT
INSERT BACKER CLIP INTO MIDDLE HOLE
IN UPPER HEAVY DUTY HINGE
HOLD BACKER CLIP IN PLACE WITH A FINGER
THROUGH ONE OF THE ADJACENT HOLES
INSERT BOLT THROUGH THE RIGHT SIDE OF THE UPPER
BRACKET AND THREAD IT INTO THE BACKER CLIP
REPEAT WITH THE LEFT SIDE OF THE UPPER BRACKET
ATTACH THE LOWER TRAY WITH BOLTS AND BACKER
CLIPS USING THE MIDDLE AND RIGHT HOLES ON
THE LOWER HEAVY DUTY HINGE
INSTALL CARRIAGE BOLT INTO UPPER BRACKET,
INSTALL WASHER AND TIGHTEN JAM NUT TO HOLD
BOLT IN PLACE
PLACE BASE OF HI-LIFT JACK INTO THE LOWER TRAY,
WITH THE BASE RESTING IN THE TRAY ONE OF THE
HOLES IN THE BAR OF THE JACK SHOULD FIT OVER
THE CARRIGE BOLT
THE UPPER BRACKET AND LOWER TRAY CAN BE
ADJUSTED VERTICALLY TO GET A HOLE TO ALIGN WITH
THE CARRIAGE BOLT, THE LOWER TRAY CAN ALSO
BE ADJUSTED SIDE TO SIDE TO GET THE JACK
TO SIT VERTICALLY
ONCE THE BRACKET AND TRAY ARE ADJUSTED
TIGHTEN BOLTS TO SECURE TO HINGES
USE THE LOCK NUT TO SECURE THE BAR OF THE JACK
TO THE UPPER BRACKET
THE USE OF A HANDLE KEEPER (NOT INCLUDED)
ON THE JACK IS RECOMMENDED TO SECURE THE
HANDLE TO THE BAR DURING TRASPORTATION
1. Remove spare tire and insert backer
clip into middle hole in upper heavy
duty hinge
2. Hold backer clip in place with a finger
through one of the adjacent holes
3. Insert bolt through the right side of
the upper bracket and thread it into
the backer clip
4. Repeat with the left side of the upper
bracket
5. Attach the lower tray with bolts and
backer clips using the middle and
right holes on the lower heavy duty
hinge
6. Install carriage bolt into upper
bracket, install washer and tighten
jam nut to hold bolt in place
7. Place base of hi-lift jack into the lower
tray, with the base resting in the tray
one of the holes in the bar of the jack
should fit over the carriage bolt
8. The upper bracket and lower tray can
be adjusted vertically to get a hole to align with the carriage bolt, the lower tray can also be
adjusted side to side to get the jack to sit vertically
9. Once the bracket and tray are adjusted tighten bolts to secure to hinges
10. Use the lock nut to secure the bar of the jack to the upper bracket using the Wrangler’s lug wrench
11. The use of a handle keeper (not included) on the jack is recommended to secure the
handle to the bar during transportation
NOTE: • Process is much easier if spare tire is removed before installation
• Maximum spare tire size compatible with the carrier is 35”
BACKER CLIP
HEAVY DUTY
HINGE
(SOLD SEPERATLY)
TOP
CB ANTENNA
MOUNT LOCATION
UPPER BRACKET
LOWER TRAY
JAM NUT
LOCK NUT
CARRIAGE
BOLT
INSERT BACKER CLIP INTO MIDDLE HOLE
IN UPPER HEAVY DUTY HINGE
HOLD BACKER CLIP IN PLACE WITH A FINGER
THROUGH ONE OF THE ADJACENT HOLES
INSERT BOLT THROUGH THE RIGHT SIDE OF THE UPPER
BRACKET AND THREAD IT INTO THE BACKER CLIP
REPEAT WITH THE LEFT SIDE OF THE UPPER BRACKET
ATTACH THE LOWER TRAY WITH BOLTS AND BACKER
CLIPS USING THE MIDDLE AND RIGHT HOLES ON
THE LOWER HEAVY DUTY HINGE
INSTALL CARRIAGE BOLT INTO UPPER BRACKET,
INSTALL WASHER AND TIGHTEN JAM NUT TO HOLD
BOLT IN PLACE
PLACE BASE OF HI-LIFT JACK INTO THE LOWER TRAY,
WITH THE BASE RESTING IN THE TRAY ONE OF THE
HOLES IN THE BAR OF THE JACK SHOULD FIT OVER
THE CARRIGE BOLT
THE UPPER BRACKET AND LOWER TRAY CAN BE
ADJUSTED VERTICALLY TO GET A HOLE TO ALIGN WITH
THE CARRIAGE BOLT, THE LOWER TRAY CAN ALSO
BE ADJUSTED SIDE TO SIDE TO GET THE JACK
TO SIT VERTICALLY
ONCE THE BRACKET AND TRAY ARE ADJUSTED
TIGHTEN BOLTS TO SECURE TO HINGES
USE THE LOCK NUT TO SECURE THE BAR OF THE JACK
TO THE UPPER BRACKET
THE USE OF A HANDLE KEEPER (NOT INCLUDED)
ON THE JACK IS RECOMMENDED TO SECURE THE
HANDLE TO THE BAR DURING TRASPORTATION
*Easily mounts to the Heavy-Duty JK hinges, sold separately
  • Page 1 1

MORryde JP54-010 Installation guide

Brand
MORryde
Model
JP54-010
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents