1of4
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Crossbar Assembly Fixture Chain Ceiling Canopy Bulb
Table of
Contents
FixtureHeightAdjustable
11.75” to 69”
Fixture Chain
x1
E
Ceiling Canopy
x1
F
Quick Link
x2
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
G
Outlet Box Screw
x2
B
Wire Connector
x3
C
Fixture Loop
x1
STEP 1 STEP 2 STEP 4 STEP 5
STEP 3 STEP 6
Fixture Loop
LightSource
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
3BULBSREQUIRED
BULBSNOTINCLUDED
IBridge
x1 JStem
x4
KCentre rod
x1
LRing
x1
MSocket Assembly
x1
HRod
x1
Lock Screw
x4
N
Installation Instructions: UQL3795
www.urbanambiance.com
2of4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
STEP 1
www.urbanambiance.com
3of4
STEP 4
1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
STEP 3
2
Step2-3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling:
9’ ceiling:
10’ ceiling:
14” Chain
26” Chain
38” Chain
N
L
N
L
www.urbanambiance.com
4of4
STEP 5
STEP 6
www.urbanambiance.com
/
