urban ambiance UQL3825 Installation guide

Type
Installation guide
1 of 4
Tools Required
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
Crossbar Assembly Fixture Chain Ceiling Canopy Bulb
Table of
Contents
STEP 2 STEP 3 STEP 5 STEP 6
Fixture Height Adjustable
30.5to 78.5
Fixture Chain
x 1
E
Ceiling Canopy
x 1
F
Quick Link
x 2
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 4
G
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Stem with loop
x 1
STEP 1
Fixture Bdoy
HFixture Body
x 1
Light Source
6 BULBS REQUIRED
BULBS NOT INCLUDED
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Installation Instructions: UQL3825
www.urbanambiance.com
2 of 4
STEP 1 21
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
www.urbanambiance.com
3 of 4
STEP 3
2
Step 2 - 3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8 ceiling: 6” Chain
9 ceiling: 18” Chain
10 ceiling: 30” Chain
STEP 4 1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N
supply wire from fixture
smooth side or identified
with the label “L
N
L
N
L
www.urbanambiance.com
4 of 4
STEP 6
STEP 5
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

urban ambiance UQL3825 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI