Burda 94443 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Burda 94443 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3
310
320
330
340
350
3
60
3
310
320
330
340
350
360
To produce the planking support the
installation is possible with UW dry
construction profiles by simply plugging
them on.
3
310
320
330
340
350
360
Fixing bolts according to the
dimensions of the ceramic
manufacturer and lock with the
enclosed M 12 nuts .
Use of a UW dry construction profile
as a floor rail facilitates the
professional drywall planking.
3
310
320
330
340
350
360
Important note!
WC power bearing for WC ceramics
with contact surface smaller than 17 cm,
for mounting between the crossbars
Art. no. 216400
First attach the clamp to the drain pipe,
then snap into the abutment
240mm
375mm 340mm
0mm
ATTENTION: New clamp assembly
max. 220 mm
extendable
Fasten with a 13 mm spanner
Herbert Burda GmbH
Krefelder Straße 87 40549 Düsseldorf T +49 211 9 50 01-0 F +49 211 50 05 75
www.burda-online.com info@burda-online.com
Sanitärtechnik
Assembly instruction BS+ WC
Mounting on the front wall
Push the threaded rod through the
hole into the wall bracket until it
clicks, Align the depth of the wall
bracket and fix it with the clamp.
3
310
320
330
340
350
360
Note: Before mounting the element
adjust to the corresponding dimensions
of the ceramic manufacturer.
max. 220 mm
extendable
Planking
2 x 12,5 mm Plasterboard
or
1 x 18 mm
Plasterboard
3
310
320
330
340
350
3
60
3
310
320
330
340
350
3
60
Note: Before mounting the element
adjust to the corresponding dimensions
of the ceramic manufacturer.
3
310
320
330
340
350
3
60
30 cm
Fixing bolts according to
the dimensions of the ceramic
manufacturer and lock with the
enclosed M 12 nuts supplied.
Screw the mounting element to
the vertical drywall profiles.
Insert stabilising plates
First attach the clamp to the drain pipe,
then snap into the abutment
ATTENTION: New clamp assembly
240mm
375mm 340mm
0mm
Important note!
WC power bearing for WC ceramics
with contact surface smaller than 17 cm,
for mounting between the crossbars
Art. no. 216400
max. 220 mm
extendable
3
310
320
330
340
350
360
Sanitärtechnik
Assembly instruction BS+ WC
Mounting in the stud wall
Herbert Burda GmbH
Krefelder Straße 87 40549 Düsseldorf T +49 211 9 50 01-0 F +49 211 50 05 75
www.burda-online.com info@burda-online.com
Planking
2 x 12,5 mm Plasterboard
or
1 x 18 mm
Plasterboard
Fasten with a 13 mm spanner
/