Fusion MS-SW10 User manual

Brand: Fusion

Model: MS-SW10

Category: Car speakers

Type: User manual

INSTALLATION GUIDELINES

Ensure the audio system is turned oﬀ before making any connections to

the ampliﬁer, subwoofer or source unit. Failure to do so could result in

permanent damage to the audio system.

When wiring the subwoofer ensure that wires are protected from sharp

objects and always use rubber grommets when wiring through panels.

Ensure all terminals and connections are protected from grounding and

from each other, as failure to do so could result in permanent damage to

the audio system.

When connecting the ampliﬁer and subwoofer ensure you connect the

positive and negative output wire from the ampliﬁer to the corresponding

subwoofer terminals.

Ensure there is adequate clearance and depth for the subwoofer to

be mounted

Drill the holes for the mounting screws

Insert the subwoofer and secure with the appropriate screws

»

»

»

MARINE 10” SUBWOOFER

MS-SW10

WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss!

SUBWOOFER PARAMETERS

MAX POWER RATING 400 Watts

FREQUENCY RESPONSE 30Hz - 2kHz

IMPEDANCE 4 Ohms

SENSITIVITY 88 dB

MOUNTING DEPTH 115mm (4-1/2”)

MOUNTING DIAMETER 222mm (8 - 3/4”)

OVERALL DIAMETER 268mm (10 - 1/2”)

RECORD YOUR PURCHASE DETAILS HERE:

MODEL NUMBER

DATE OF PURCHASE

AFFIX RECEIPT HERE

www.fusionelectronics.com

v 5.0

PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2009 by FUSION Electronics Limited. All rights reserved. Speciﬁcations and design are subject to change without notice.

YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center.

1

Fusion MS-SW10 User manual

Brand: Fusion

Model: MS-SW10

Category: Car speakers

Type: User manual

Download PDF

Related papers

Other documents