5/148
© MOBOTIX AG • Security Vision Systems • Made in Germany
3 Operating The Camera 98
3.1 Manual and Automatic Operation– Overview 98
3.1.1 Manually Using A Computer In The 10.x.x.x IP Address Range 99
3.1.2 Automatically Using MxControlCenter Or MxEasy 100
3.1.3 Automatically Using DHCP 101
3.2 First Images And The Most Important Settings 102
3.2.1 Manually Setting Up The Network Parameters In A Browser 102
3.2.2 First Images And The Most Important Settings In The Browser 104
3.2.3 First Images And Network Parameter Configuration In MxControlCenter 106
3.2.4 First Images And Network Parameter Configuration In MxEasy 111
3.2.5 Integrating And Displaying Cameras 112
3.2.6 Starting The Camera With The Factory IP Address 114
3.2.7 Starting The Camera With An Automatic IP Address (DHCP) 115
3.3 Virtual PTZ And Full Image Recording 116
3.3.1 Preparing The Virtual PTZ Function 116
3.3.2 Full Image Recording 118
3.3.3 Special S14 Configuration In The Browser 120
3.4 MicroSD Card Recording 130
3.4.1 Introduction 130
3.4.2 Formatting The MicroSD Card 132
3.4.3 Activate Recording 133
3.4.4 Accessing Camera Data 134
3.4.5 Deactivating The Card Memory 134
3.4.6 Using A MicroSD Card In A Dierent MOBOTIX Camera 135
3.4.7 Limitations On Warranty When Using Flash Storage Media 135
3.5 Configuration In The Browser 136
3.5.1 Overview 136
3.5.2 General Browser Settings 136
3.5.3 Additional Configuration Options 139
3.6 Additional Notes 140
3.6.1 Do Not Sharply Bend The Connection Cables To The Sensor Modules 140
3.6.2 Password For The Administration Menu 140
3.6.3 Permanently Deactivating The Microphone 140
3.6.4 Starting The Camera With The Factory IP Address 140
3.6.5 Resetting The Camera To Factory Settings 141
3.6.6 Activate Event Control And Motion Detection 141
3.6.7 Deactivate Text And Logo Options 141
3.6.8 Deactivating The Camera Reboot 141
3.6.9 Browser 142
3.6.10 Cleaning The Camera And Lens 142
3.6.11 Safety Warnings 142
3.6.12 Online Help In The Browser 143
Contents