Champion Model 44 DRWS Datasheet
- Category
- Barbecues & grills
- Type
- Datasheet
This manual is also suitable for
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
www.championindustries.com
(1M) 9/06 Printed in U.S.A.
CH083
SPECIFIER STATEMENT
Specified unit will be Champion Model 44 DRWS
water saver high temperature dual rinse rack conveyor
dishwashing machine. Constructed of Type 304
stainless steel and measuring 44” long with 20-3/4”
vertical opening. Features top mounted control
cabinet; upper and lower one-piece stainless steel
spray arm assemblies, removable internal scrap basket
with two-piece scrap screen. Large 26” wash door with
front access and double-hook safety latch. Anti-jam
conveyor drive system.
1 year parts and labor warranty.
Shown with Vent Cowl
and Damper Option
STANDARD FEATURES
• ENERGY STAR® Qualified
• Exclusive DualRinse Technology
• Dual-pawl
cradle drive system
• One-piece cast stainless steel upper
& lower spray arm assemblies
•
Internal removable scrap baskets and
two-piece scrap screens
• Standard vertical opening accommodates
18” x 26” sheet pans
• Wide
26” leakproof door, internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closure
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Electric
tank heat
• Wash pump 2 Hp motor
• Stainless steel pump and impeller
• Single-point electrical connection
MODEL 44 DRWS RACK CONVEYOR
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption while
circulating a generous
300+ gallons of water for
Consistently Good Results
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
MODEL 44 DRWS RACK CONVEYOR
OPTIONS & ACCESSORIES
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
cradle assembly
Booster Heaters
(
completely interplumbed, controls are interwired)
Steam: 40°F - 70°F rise
Electric: 10 kW (40°F rise) (built-in only)
Electric: 16 kW (70°F rise) (built-in only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended Vent hood, stainless steel with 7” stack and
l
ocking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20-3/4”) for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
LESS IS MORE WITH CHAMPION’S DUAL RINSE MODEL 44 DRWS
Check our NSF listings and you’ll see the 44 DRWS offers the lowest water consumption in its class with less than
.54 US gallons per rack. Water consumption this low means energy savings too. Our 40°F rise booster only requires 10 kW and
70°F rise is only 16 kW.
What the numbers don’t show you is the advantage that our Dual Rinse technology provides by making sure
all wares are fully rinsed with more than 300 gallons per hour while actual fresh water consumption is only
80 gallons per hour.
EFFICIENT NEW
SPRAY SYSTEM DESIGN
To make the E-Series more efficient and
more forgiving we designed a new spray arm
system that includes:
•
Wall-of-water spray pattern via stainless
steel fluted directional spray jets for
quick and efficient washing
•
Easily removable spray arm assembly for
ease of cleaning
•
Stainless steel pump housing
and impeller
•
Larger tanks hold more water for better
washing results
INTEGRATED
BOOSTER HEATER
As well as the E-Series performs, we created
a way to make it perform even better. The
electric booster heater may
be optional, but it is an exceptional value
— engineered within the E-Series footprint
to offer a variety of advantages over other
booster designs, such as:
•
Inter-plumbed and inter-wired
• One control shuts off washer
and booster
• 10 kW for 40°F rise
• 16 kW for 70°F rise
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
•
Integrated design saves floor space
Wall-of-Water Spray Pattern
Built-in Scrap Basket
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless Steel
Spray Assembly
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
www.championindustries.com
(1M) 9/06 Printed in U.S.A.
CH083
SPECIFIER STATEMENT
Specified unit will be Champion Model 44 DRWS
water saver high temperature dual rinse rack conveyor
dishwashing machine. Constructed of Type 304
stainless steel and measuring 44” long with 20-3/4”
vertical opening. Features top mounted control
cabinet; upper and lower one-piece stainless steel
spray arm assemblies, removable internal scrap basket
with two-piece scrap screen. Large 26” wash door with
front access and double-hook safety latch. Anti-jam
conveyor drive system.
1 year parts and labor warranty.
Shown with Vent Cowl
and Damper Option
STANDARD FEATURES
• ENERGY STAR® Qualified
• Exclusive DualRinse Technology
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper
& lower spray arm assemblies
• Internal removable scrap baskets and
two-piece scrap screens
• Standard vertical opening accommodates
18” x 26” sheet pans
• Wide 26” leakproof door, internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closure
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Electric tank heat
• Wash pump 2 Hp motor
• Stainless steel pump and impeller
• Single-point electrical connection
MODEL 44 DRWS RACK CONVEYOR
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption while
circulating a generous
300+ gallons of water for
Consistently Good Results
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
MODEL 44 DRWS RACK CONVEYOR
OPTIONS & ACCESSORIES
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
cradle assembly
Booster Heaters
(completely interplumbed, controls are interwired)
Steam: 40°F - 70°F rise
Electric: 10 kW (40°F rise) (built-in only)
Electric: 16 kW (70°F rise) (built-in only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended Vent hood, stainless steel with 7” stack and
locking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20-3/4”) for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
LESS IS MORE WITH CHAMPION’S DUAL RINSE MODEL 44 DRWS
Check our NSF listings and you’ll see the 44 DRWS offers the lowest water consumption in its class with less than
.54 US gallons per rack. Water consumption this low means energy savings too. Our 40°F rise booster only requires 10 kW and
70°F rise is only 16 kW.
What the numbers don’t show you is the advantage that our Dual Rinse technology provides by making sure
all wares are fully rinsed with more than 300 gallons per hour while actual fresh water consumption is only
80 gallons per hour.
EFFICIENT NEW
SPRAY SYSTEM DESIGN
To make the E-Series more efficient and
more forgiving we designed a new spray arm
system that includes:
• Wall-of-water spray pattern via stainless
steel fluted directional spray jets for
quick and efficient washing
• Easily removable spray arm assembly for
ease of cleaning
• Stainless steel pump housing
and impeller
• Larger tanks hold more water for better
washing results
INTEGRATED
BOOSTER HEATER
As well as the E-Series performs, we created
a way to make it perform even better. The
electric booster heater may
be optional, but it is an exceptional value
— engineered within the E-Series footprint
to offer a variety of advantages over other
booster designs, such as:
• Inter-plumbed and inter-wired
• One control shuts off washer
and booster
• 10 kW for 40°F rise
• 16 kW for 70°F rise
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
• Integrated design saves floor space
Wall-of-Water Spray Pattern
Built-in Scrap Basket
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless Steel
Spray Assembly
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Project
Item No.
Quantity
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
www.championindustries.com
(1M) 9/06 Printed in U.S.A.
CH083
SPECIFIER STATEMENT
Specified unit will be Champion Model 44 DRWS
water saver high temperature dual rinse rack conveyor
dishwashing machine. Constructed of Type 304
stainless steel and measuring 44” long with 20-3/4”
vertical opening. Features top mounted control
cabinet; upper and lower one-piece stainless steel
spray arm assemblies, removable internal scrap basket
with two-piece scrap screen. Large 26” wash door with
front access and double-hook safety latch. Anti-jam
conveyor drive system.
1 year parts and labor warranty.
Shown with Vent Cowl
and Damper Option
STANDARD FEATURES
• ENERGY STAR® Qualified
• Exclusive DualRinse Technology
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper
& lower spray arm assemblies
• Internal removable scrap baskets and
two-piece scrap screens
• Standard vertical opening accommodates
18” x 26” sheet pans
• Wide 26” leakproof door, internally-fitted
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Common utility connections
• Door safety switch
• Door activated drain closure
• Enclosure panels (front and sides)
• Splash shields
• Low-water tank heat protection
• Rinse-saver device
• Stainless steel heavy-gauge construction,
including base and feet
• Electric tank heat
• Wash pump 2 Hp motor
• Stainless steel pump and impeller
• Single-point electrical connection
MODEL 44 DRWS RACK CONVEYOR
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption while
circulating a generous
300+ gallons of water for
Consistently Good Results
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
MODEL 44 DRWS RACK CONVEYOR
OPTIONS & ACCESSORIES
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
cradle assembly
Booster Heaters
(completely interplumbed, controls are interwired)
Steam: 40°F - 70°F rise
Electric: 10 kW (40°F rise) (built-in only)
Electric: 16 kW (70°F rise) (built-in only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended Vent hood, stainless steel with 7” stack and
locking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20-3/4”) for large ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
LESS IS MORE WITH CHAMPION’S DUAL RINSE MODEL 44 DRWS
Check our NSF listings and you’ll see the 44 DRWS offers the lowest water consumption in its class with less than
.54 US gallons per rack. Water consumption this low means energy savings too. Our 40°F rise booster only requires 10 kW and
70°F rise is only 16 kW.
What the numbers don’t show you is the advantage that our Dual Rinse technology provides by making sure
all wares are fully rinsed with more than 300 gallons per hour while actual fresh water consumption is only
80 gallons per hour.
EFFICIENT NEW
SPRAY SYSTEM DESIGN
To make the E-Series more efficient and
more forgiving we designed a new spray arm
system that includes:
• Wall-of-water spray pattern via stainless
steel fluted directional spray jets for
quick and efficient washing
• Easily removable spray arm assembly for
ease of cleaning
• Stainless steel pump housing
and impeller
• Larger tanks hold more water for better
washing results
INTEGRATED
BOOSTER HEATER
As well as the E-Series performs, we created
a way to make it perform even better. The
electric booster heater may
be optional, but it is an exceptional value
— engineered within the E-Series footprint
to offer a variety of advantages over other
booster designs, such as:
• Inter-plumbed and inter-wired
• One control shuts off washer
and booster
• 10 kW for 40°F rise
• 16 kW for 70°F rise
• Conductive heat transfer to wash tank
• Stainless steel booster heater lasts
the life of the machine
• Integrated design saves floor space
Wall-of-Water Spray Pattern
Built-in Scrap Basket
Large Heating Element
Two-Piece Scrap Screen
Stainless Steel
Built-in Nested Booster
One-Piece Cast Stainless Steel
Spray Assembly
Dimensions shown in inches
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Dimensions shown in inches
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
Left-to-Right Operation
1A
5"
3"
26
Door
CowlCowl Cowl
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44"8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
Cowl
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Right-to-Left Operation
1A
5"
3"
26
Door
Cowl Cowl
Cowl
Ext
.
Hoo
d
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44" 8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
Volume crated: 130 cu. ft.
Shipping weight crated: 600 lbs.
Plumbing Notes: Because of the variation in
house-supplied steam and water pressures, steam
and water pressure regulating valves (PRVs) may
be needed. (Water PRV is standard on machines
with booster.) The PRVs can either be purchased
from Champion or obtained locally.
Venting Notes: Fabricated duct size:
3-7/8” x 15-7/8” (Outside dimensions)
Warning: Plumbing and electrical connections
should be made by qualified personnel who will
observe all the applicable plumbing, sanitary, safety
codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010
standard or equivalent) to be supplied
(by others) in common water supply line at service
connection.
Machine Only
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 111 150 150
240/60/1 98 125 125
208/60/3 70 90 90
240/60/3 62 80 80
480/60/3 31 40 40
575/60/3 24 35 35
TABLE A - Machine Connection
Machine and steam built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 33 45 45
240/60/1 30 40 40
208/60/3 25 35 35
240/60/3 22 30 30
480/60/3 12 15 15
575/60/3 9 15 15
TABLE B - Machine & Booster Connection
70°F/39°C Rise – 16 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 188 250 250
240/60/1 165 225 225
208/60/3 115 150 150
240/60/3 100 125 125
480/60/3 51 70 70
575/60/3 41 50 50
40°F/22°C Rise – 10 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 159 200 200
240/60/1 140 175 175
208/60/3 98 125 125
240/60/3 86 110 110
480/60/3 44 60 60
575/60/3 35 45 45
Utilities
1 Electrical Connection
A Machine Only (see Table A)
Machine & Booster (see Table B)
2 Hot Water
3/4” NPT 180°F/82°C min. hot water
connection. (Machine without booster.)
3/4” NPT 140°F/60°C min. hot water
connection. (40°F/34°C rise booster)
3/4” NPT 110°F/49°C min. hot water
connection. (70°F/39°C rise booster)
Flow pressure 20-22 psi.
3 Drain
1-1/2” NPT machine connection.
Maximum flow 15 gpm.
4 Steam
A 3/4” NPT machine connection.
Flow pressure 15-30 PSI. (Steam coil)
B 3/4” NPT machine connection.
Flow pressure 15-30 PSI.
(Steam injector)
5 Condensate (no back pressure)
1/2” NPT machine return to boiler
6 Vents
A Load end: 200 CFM @ 1/4” S.P.
B Unload end: 400 CFM @ 1/4” S.P.
(With blower-dryer increase room
ventilation by 600 CFM.)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated) 148
Wash tank (US gal.) 21
Conveyor speed (ft/min.) 4.1
Motor Horsepower
Drive 1/6
Wash 2
Dual Rinse 1/10
Water Consumption
US Gal. per hr. (max. use) 80
US Gal. per rack .54
Heating
Wash Tank, electric (kW) 15
DualRinse Tank electric (kW) 3.3
Tank heat, steam (lbs/hr.
required at 15 PSI flow pressure) 75
Electric booster (built-in)
(kW supplied for 40°F rise) 10
Electric booster
(kW supplied for 70°F rise) 16
Steam booster (lbs./hr.
required for 40°F rise) 50
Steam booster (lbs./hr.
required for 70°F rise) 80
Venting
Load end (minimum CFM) 200
Unload end (minimum CFM) 400
Standard 20” x 20”
rack complement
Peg 2
Dimensions shown in inches
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Dimensions shown in inches
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
Left-to-Right Operation
1A
5"
3"
26
Door
CowlCowl Cowl
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44"8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
Cowl
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Right-to-Left Operation
1A
5"
3"
26
Door
Cowl Cowl
Cowl
Ext
.
Hoo
d
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44" 8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
Volume crated: 130 cu. ft.
Shipping weight crated: 600 lbs.
Plumbing Notes: Because of the variation in
house-supplied steam and water pressures, steam
and water pressure regulating valves (PRVs) may
be needed. (Water PRV is standard on machines
with booster.) The PRVs can either be purchased
from Champion or obtained locally.
Venting Notes: Fabricated duct size:
3-7/8” x 15-7/8” (Outside dimensions)
Warning: Plumbing and electrical connections
should be made by qualified personnel who will
observe all the applicable plumbing, sanitary, safety
codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010
standard or equivalent) to be supplied
(by others) in common water supply line at service
connection.
Machine Only
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 111 150 150
240/60/1 98 125 125
208/60/3 70 90 90
240/60/3 62 80 80
480/60/3 31 40 40
575/60/3 24 35 35
TABLE A - Machine Connection
Machine and steam built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 33 45 45
240/60/1 30 40 40
208/60/3 25 35 35
240/60/3 22 30 30
480/60/3 12 15 15
575/60/3 9 15 15
TABLE B - Machine & Booster Connection
70°F/39°C Rise – 16 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 188 250 250
240/60/1 165 225 225
208/60/3 115 150 150
240/60/3 100 125 125
480/60/3 51 70 70
575/60/3 41 50 50
40°F/22°C Rise – 10 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 159 200 200
240/60/1 140 175 175
208/60/3 98 125 125
240/60/3 86 110 110
480/60/3 44 60 60
575/60/3 35 45 45
Utilities
1 Electrical Connection
A Machine Only (see Table A)
Machine & Booster (see Table B)
2 Hot Water
3/4” NPT 180°F/82°C min. hot water
connection. (Machine without booster.)
3/4” NPT 140°F/60°C min. hot water
connection. (40°F/34°C rise booster)
3/4” NPT 110°F/49°C min. hot water
connection. (70°F/39°C rise booster)
Flow pressure 20-22 psi.
3 Drain
1-1/2” NPT machine connection.
Maximum flow 15 gpm.
4 Steam
A 3/4” NPT machine connection.
Flow pressure 15-30 PSI. (Steam coil)
B 3/4” NPT machine connection.
Flow pressure 15-30 PSI.
(Steam injector)
5 Condensate (no back pressure)
1/2” NPT machine return to boiler
6 Vents
A Load end: 200 CFM @ 1/4” S.P.
B Unload end: 400 CFM @ 1/4” S.P.
(With blower-dryer increase room
ventilation by 600 CFM.)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated) 148
Wash tank (US gal.) 21
Conveyor speed (ft/min.) 4.1
Motor Horsepower
Drive 1/6
Wash 2
Dual Rinse 1/10
Water Consumption
US Gal. per hr. (max. use) 80
US Gal. per rack .54
Heating
Wash Tank, electric (kW) 15
DualRinse Tank electric (kW) 3.3
Tank heat, steam (lbs/hr.
required at 15 PSI flow pressure) 75
Electric booster (built-in)
(kW supplied for 40°F rise) 10
Electric booster
(kW supplied for 70°F rise) 16
Steam booster (lbs./hr.
required for 40°F rise) 50
Steam booster (lbs./hr.
required for 70°F rise) 80
Venting
Load end (minimum CFM) 200
Unload end (minimum CFM) 400
Standard 20” x 20”
rack complement
Peg 2
Dimensions shown in inches
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Dimensions shown in inches
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
Left-to-Right Operation
1A
5"
3"
26
Door
CowlCowl Cowl
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44"8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
Cowl
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
MODEL 44 DRWS
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Right-to-Left Operation
1A
5"
3"
26
Door
Cowl Cowl
Cowl
Ext
.
Hoo
d
BSTR
3
6B
6A
1A
2HP
WASH
26"
Door
2
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
4"
4"
5"
44" 8"
8"
5"
5"
7"
12"
Plumbing
Clearance
20-3/4"
Clear
34"
Load
Height
20-3/4"
Clear
34"
Load
Height
3"
60"
89"
Door
Removal
82"
Door
Open
Height
58-1/2"
Machine
Height
7"
12"
Plumbing
Clearance
2
4A
6A
5
1A
3
6B
4B
25"
28-1/2"
36"
14-1/2"
6"
8"
12-1/2"
16"
2"
8"
13-3/4"
9-1/4"
2"
14-1/2"
10"
4A
4B
5
9"
9"
10"
10"
17-1/2"
17-1/2"
2-1/4"
1-3/4"
1-1/2"
Can be up
to 10"
5/8"
21"
8"
1/10
HP
1/10
HP
End View
6" Nom.
Wall
2-3/8"
2-1/2"
3-5/8"
30-5/8"
30-5/8"
20-1/8"
2"
CONTROL
CABINET
22"
25"
33"
Opening
Inside Track
Front View
Without Booster
Front View
With Booster
Plan ViewSuggested Table
Construction
Volume crated: 130 cu. ft.
Shipping weight crated: 600 lbs.
Plumbing Notes: Because of the variation in
house-supplied steam and water pressures, steam
and water pressure regulating valves (PRVs) may
be needed. (Water PRV is standard on machines
with booster.) The PRVs can either be purchased
from Champion or obtained locally.
Venting Notes: Fabricated duct size:
3-7/8” x 15-7/8” (Outside dimensions)
Warning: Plumbing and electrical connections
should be made by qualified personnel who will
observe all the applicable plumbing, sanitary, safety
codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010
standard or equivalent) to be supplied
(by others) in common water supply line at service
connection.
Machine Only
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 111 150 150
240/60/1 98 125 125
208/60/3 70 90 90
240/60/3 62 80 80
480/60/3 31 40 40
575/60/3 24 35 35
TABLE A - Machine Connection
Machine and steam built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 33 45 45
240/60/1 30 40 40
208/60/3 25 35 35
240/60/3 22 30 30
480/60/3 12 15 15
575/60/3 9 15 15
TABLE B - Machine & Booster Connection
70°F/39°C Rise – 16 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 188 250 250
240/60/1 165 225 225
208/60/3 115 150 150
240/60/3 100 125 125
480/60/3 51 70 70
575/60/3 41 50 50
40°F/22°C Rise – 10 kW
Machine and Electric built-in booster
Minimum Maximum
Supply Ckt. Overcurrent
Elec. Rated Conductor Protective
Specs. Amps Ampacity Device
208/60/1 159 200 200
240/60/1 140 175 175
208/60/3 98 125 125
240/60/3 86 110 110
480/60/3 44 60 60
575/60/3 35 45 45
Utilities
1 Electrical Connection
A Machine Only (see Table A)
Machine & Booster (see Table B)
2 Hot Water
3/4” NPT 180°F/82°C min. hot water
connection. (Machine without booster.)
3/4” NPT 140°F/60°C min. hot water
connection. (40°F/34°C rise booster)
3/4” NPT 110°F/49°C min. hot water
connection. (70°F/39°C rise booster)
Flow pressure 20-22 psi.
3 Drain
1-1/2” NPT machine connection.
Maximum flow 15 gpm.
4 Steam
A 3/4” NPT machine connection.
Flow pressure 15-30 PSI. (Steam coil)
B 3/4” NPT machine connection.
Flow pressure 15-30 PSI.
(Steam injector)
5 Condensate (no back pressure)
1/2” NPT machine return to boiler
6 Vents
A Load end: 200 CFM @ 1/4” S.P.
B Unload end: 400 CFM @ 1/4” S.P.
(With blower-dryer increase room
ventilation by 600 CFM.)
44” Single Tank Water Saver
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
MODEL 44 DRWS
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated) 148
Wash tank (US gal.) 21
Conveyor speed (ft/min.) 4.1
Motor Horsepower
Drive 1/6
Wash 2
Dual Rinse 1/10
Water Consumption
US Gal. per hr. (max. use) 80
US Gal. per rack .54
Heating
Wash Tank, electric (kW) 15
DualRinse Tank electric (kW) 3.3
Tank heat, steam (lbs/hr.
required at 15 PSI flow pressure) 75
Electric booster (built-in)
(kW supplied for 40°F rise) 10
Electric booster
(kW supplied for 70°F rise) 16
Steam booster (lbs./hr.
required for 40°F rise) 50
Steam booster (lbs./hr.
required for 70°F rise) 80
Venting
Load end (minimum CFM) 200
Unload end (minimum CFM) 400
Standard 20” x 20”
rack complement
Peg 2
-
1
-
2
-
3
-
4
-
5
-
6
Champion Model 44 DRWS Datasheet
- Category
- Barbecues & grills
- Type
- Datasheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Moyer Diebel MD44/MD66 Owner's manual
-
-
Digitus DN-19 07-U-S Datasheet
-
Jet Tech F-16DP Datasheet
-
-
Lorex Technology ACC-DRW User manual
-
-
Insinger BLOWER DRYER UNIT Datasheet
-
-
Blakeslee [XF]F-PEE-96 Datasheet