Aiphone AP-40AS/C Operating instructions

Aiphone
Brand
Aiphone
Model
AP-40AS/C
Category
Surge protectors
Type
Operating instructions

This manual is also suitable for

Aiphone AP-40AS/C

The Aiphone AP-40AS/C is an add-on selector for the AP-M/C High Powered System. It allows you to add up to 40 additional stations to your system, giving you the ability to communicate with a large number of people in different locations.

The AP-40AS/C is easy to use. Simply connect it to your master station and then add the desired number of sub stations. Each sub station can be assigned a unique number, so you can easily identify who is calling.

The AP-40AS/C is a versatile system that can be used in a variety of applications. It is perfect for schools, offices, warehouses, and other large facilities. With its ability to add up to 40 stations, the AP-40AS/C can help you to improve communication and productivity in your organization.

Aiphone AP-40AS/C

The Aiphone AP-40AS/C is an add-on selector for the AP-M/C High Powered System. It allows you to add up to 40 additional stations to your system, giving you the ability to communicate with a large number of people in different locations.

The AP-40AS/C is easy to use. Simply connect it to your master station and then add the desired number of sub stations. Each sub station can be assigned a unique number, so you can easily identify who is calling.

The AP-40AS/C is a versatile system that can be used in a variety of applications. It is perfect for schools, offices, warehouses, and other large facilities. With its ability to add up to 40 stations, the AP-40AS/C can help you to improve communication and productivity in your organization.

- INSTRUCTIONS -
The AP-10AS/C, AP-20AS/C and AP-40AS/C add-on selectors are designed to function with the AP-M/C High
Powered System. Multiple add-on selectors can be added to a master station along with a variety of sub stations to
create a communication system tailored to a user's needs. All standard AP-M system accessories can be used in
conjunction with the add-on selectors.
AP-nAS/C
Add-on Selectors for the AP-M/C High Powered System
AP-10AS/C, 10-call AP-20AS/C, 20-call AP-40AS/C, 40-call
Special
Order
Products
Pg. 1
NAMES & FUNCTIONS:
1. OFF button
2. Selector button
3. OFF LED
4. Directory card
5. Station selector LED
AP-nAS/C TERMINAL DEFINITIONS:
1~40 Station number
E Common communication
Individual Components for System:
AP-nM/C Master station modified for add-on selector connection
AS-3A Desk or wall mount sub station
AS-3WA 2-call desk or wall mount sub station
AS-3N Ceiling mount sub station
NP-B Call button
AH-108 8 ohm, 10 Watt horn speaker
LS-NVP Vandal resistant sub station
LS-NVP-W Vandal and weather resistant sub station
SBX-NVP Surface mount box for LS-NVP and LS-NVP-W
1
2
54
3
SPECIFICATIONS:
Power Source: 110V AC
Power Consumption: 45W (Max.), 4W (Standby)
Communication Output: 300mW at 8 or 16 ohms (receive from subs and master to master)
10W at 8 or 16 ohms (transmit to subs)
Communication: Push-to-talk, release-to-listen (TALK button on master), hands free at sub station.
Calling: Master to sub or other master: By voice (TALK on master) or tone (CALL on master)
Sub to master: Call button on sub activates tone and LED at master,
remaining lit for approximately 20 seconds.
Wiring: One pair homerun from sub stations
(Single call subs to nearest master, dual call subs to both masters)
2 pair plus one pair for each station; master to master
Twisted cable is required. Shielded cable is recommended.
Wiring Distance: 510' with 22AWG; 1,225' with 18AWG.
IMPORTANT:
* Do not attempt to install or connect wires on the system while the system's power cord is plugged in.
* AP-M masters and related equipment, unless specified as "weather resistant", are designed for indoor use only. Door station (LS-NVP-W) may
be installed outdoors in a protected area. Do not expose any equipment directly to rain or extreme weather conditions.
* Any other manufacturer's products installed with the system (power supply, external device, etc.) are not covered under Aiphone's warranty.
* Do not mount AP-M equipment in the following places, as it may cause the system to malfunction:
- High or extreme cold temperature areas: under direct sunlight, near equipment that varies in temperature, in front of air conditioner,
inside a refrigerated area, etc.
- Places subject to moisture or humidity extremes.
- Places subject to environmental conditions, such as dust, oil, chemicals, salt, etc.
* Severe weather conditions, such as lightning storms, may cause damage to AP-M equipment. We recommend that power surge protection be
installed to minimize potential component level damage.
- SA-1 surge arrestors should be installed on all communication lines (one SA-1 for every two connected to master.).
Pg. 2
AP-10,20,40AS Instr.
1098bkjd
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
TECHNICAL SUPPORT E-MAIL:
[email protected]
WIRING DIAGRAM:
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
For additional information about this system,
please refer to the standard AP-M instructions.
OPERATIONS:
* POWER SWITCH MUST BE ON FOR THE SYSTEM TO BE OPERATIONAL.
· Receiving a call from a sub station:
1. Sub station calls in with mono-electronic tone, heard as long as call button at sub is depressed.
2. LED light corresponding to calling station will light at master, staying on approximately 20 seconds.
3. Depress station button with lit LED.
4. Press TALK button on the master to speak, and release to listen.
5. Press OFF button to the left of the station selector button when the call is concluded.
· Calling a sub or master station:
1. Depress station number of the location you wish to call.
2. Press TALK on the master to speak, and release to hear reply.
3. If you wish to send a pre-announce tone to the called station, press the CALL button on the master.
A mono-electronic tone will be heard at the called station.
4. Press OFF button to the left of the station selector button when the call is concluded.
· Receiving a call from another master station:
1. When one master calls another master, no station LEDs light up, and the responding master answers
hands free. The calling master uses the TALK button to speak.
2. The "occupied lamp" will be on while the initiating master has a station selected.
3. The responding master should not press any buttons to respond to another master's call.
AP-10MS/C
AS-3A
1
E
LS-NVP
Red
Blk
Grn
AP-40AS/C
1
2
3
~
40
Red
Blk
Blu
Wht
Brn
Grn
Wiring from
Add-on Selector
AS-3N
Red
Red
AS-3A
NOTE:
AP-10AS/C &
AP-20AS/C wire
the same as
shown here.
1
2
3
~
10
E
C
R
X1
X2
X3
X4
X5
X6
1
E
AH-108
  • Page 1 1
  • Page 2 2

Aiphone AP-40AS/C Operating instructions

Aiphone
Brand
Aiphone
Model
AP-40AS/C
Category
Surge protectors
Type
Operating instructions
This manual is also suitable for

Aiphone AP-40AS/C

The Aiphone AP-40AS/C is an add-on selector for the AP-M/C High Powered System. It allows you to add up to 40 additional stations to your system, giving you the ability to communicate with a large number of people in different locations.

The AP-40AS/C is easy to use. Simply connect it to your master station and then add the desired number of sub stations. Each sub station can be assigned a unique number, so you can easily identify who is calling.

The AP-40AS/C is a versatile system that can be used in a variety of applications. It is perfect for schools, offices, warehouses, and other large facilities. With its ability to add up to 40 stations, the AP-40AS/C can help you to improve communication and productivity in your organization.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents