Silvercrest SSM 550 E1 User Manual And Service Information

English ........................................................................................................................ 2

Suomi ....................................................................................................................... 23

Svenska ................................................................................................................... 45

Dansk ....................................................................................................................... 65

Français .................................................................................................................... 87

Nederlands ............................................................................................................ 109

Deutsch ................................................................................................................... 131

V 1.1

SilverCrest SSM 550 E1

2 - English

Contents

Introduction ................................................................................................................ 4

Intended use ............................................................................................................... 4

Package contents ....................................................................................................... 5

Controls ...................................................................................................................... 5

Technical specifications ............................................................................................... 6

Safety instructions ...................................................................................................... 7

Before you start ......................................................................................................... 9

Getting started ........................................................................................................... 9

Blender setup ................................................................................................................................................... 9

Use ........................................................................................................................... 10

Filling the blender jug ................................................................................................................................... 10

Attaching the blender jug to the motor unit ................................................................................................ 10

Switching on / selecting speed ................................................................................................................... 10

Filling the blender jug while the blender is running .................................................................................... 11

Removing the blender jug from the motor unit ........................................................................................... 11

Sample Recipes ........................................................................................................ 12

Mojo Picón .................................................................................................................................................... 12

Guacamole ................................................................................................................................................... 13

Piña Colada .................................................................................................................................................. 13

Frozen Cappuccino ...................................................................................................................................... 14

Smoothie ....................................................................................................................................................... 14

Bulgarian Tarator ......................................................................................................................................... 15

Tropical Shake .............................................................................................................................................. 15

Hawaii Mix ................................................................................................................................................... 16

Banana Shake .............................................................................................................................................. 16

Cosmopolitan ............................................................................................................................................... 16

After use ................................................................................................................... 17

Maintenance / cleaning .............................................................................................................................. 17

Cleaning the blending jug manually ...................................................................................................... 18

Disassembling the blender jug ................................................................................................................ 18

SilverCrest SSM 550 E1

English - 3

Troubleshooting ....................................................................................................... 19

Environmental regulations and disposal information ............................................... 19

Conformity ............................................................................................................... 20

Guarantee information ............................................................................................. 21

SilverCrest SSM 550 E1

4 - English

Introduction

Thank you for buying a SilverCrest product.

The SSM 550 E1 blender can be used to puree, blend and mix foods and to crush ice.

Intended use

This blender is not intended for commercial use.

This blender is suitable exclusively for use indoors, in dry, sealed spaces.

Always make sure the blender is on a stable surface.

The blender fulfils all relevant norms and standards associated with CE Conformity. Any modifications to

the device other than recommended changes by the manufacturer may result in these standards no longer

being met.

The blender may not be used to grind or chop nuts, seeds or stalks or to process hot or boiling foods.

Non-food substances should also not be processed.

SilverCrest SSM 550 E1

English - 5

Package contents

 Motor unit with power cord and plug

 Blender jug with cutting blade

 Measuring cap

 Lid

 This user manual

Controls

These operating instructions have a fold-out cover. On the inside of the cover, the blender is shown with

figures indicated. The meanings of the numbers are as follows:

1 Measuring cap

2 Lid

3 Blender jug with scale and cutting blade

4 Rotary switch

5 Power cord

6 Motor unit

7 Cord wrap (on the underside of the motor unit)

SilverCrest SSM 550 E1

6 - English

Technical specifications

Manufacturer: SilverCrest

Model name: SSM 550 E1

Operating voltage: 220 - 240 V, 50/60 Hz

Power: max. 550 W

Speed levels: 5

Power cord length: 100 cm

Dimensions: approx. 180 x 173 x 438 mm (W x D x H)

Weight: approx. 3750g

Max. fill level: 1.75 l

SO time*: 3 minutes

Protection Class II

* The short operating time (SO time) is the maximum permitted continuous operating time without the

electric motor overheating and potentially being damaged. After this operating period, you must switch off

the blender and wait for the motor to cool down to ambient temperature.

SilverCrest SSM 550 E1

English - 7

Safety instructions

Before you use this device for the first time, please read the following notes in this manual and heed all

warnings, even if you are familiar with handling electronic devices. Keep these operating instructions in a

safe place for future reference. If you sell the device or give it away, pass on the user manual at the same

time. It forms parts of the product.

Explanation of symbols

In this user manual, warnings are used as follows. Some of these symbols are affixed to the product itself

in order to alert the user to potential risks.

WARNING!

This symbol denotes important information for the safe operation of the product and user

safety. It warns against risks which could, if left unheeded, cause danger to life and limb,

injuries or material damage.

Risk of electric shock!

This symbol warns of risks which could, if left unheeded, cause damage to life and limb

through electric shock.

This symbol denotes further information on the topic.

Children and persons with disabilities

This appliance is not to be used by children. The appliance and its power cable should be kept out of the

reach of children. Appliances may be used by persons with reduced physical, sensorial or mental

capabilities and/or who have no experience in, or knowledge of, using such appliances providing they

are supervised or have been instructed in how to use the appliance safely and have understood the

associated risks. Do not allow children to play with the appliance.

WARNING of suffocation!

Packaging material is not a toy. Do not allow children to play with plastic bags. There is a risk

of suffocation.

WARNING of falling objects!

Make sure that children cannot pull the device from the work surface by the power cord.

There is a danger of injury.

Keep the device out of the reach of children.

SilverCrest SSM 550 E1

8 - English

General safety instructions

Risk of electric shock!



The power cord must not be damaged. Never replace a damaged power cord, instead

contact customer services (see "Guarantee Information" on page 21). There is a risk of

electric shock in the case of damaged power cords.



Do not open the blender housing - it contains no serviceable parts. Opening the housing

can expose you to the risk of electric shock.



If you notice any smoke, unusual noises or strange smells, switch off the device

immediately and remove the plug from the wall socket. If this occurs, do not continue to

use the device and have it checked out by an expert. Never inhale smoke from a

possible device fire. If you do inadvertently inhale smoke, seek medical attention. Smoke

inhalation can be damaging to your health.



Make sure that the power cord cannot be damaged by sharp edges or hot spots. After

use, always wind the power cord back around the cord wrap (7) underneath the motor

unit (6).



Make sure that the power cord cannot get crushed or squashed.



The appliance must always be disconnected from the mains when left unsupervised and

before assembly, disassembly or cleaning.



When disconnecting the power supply, always pull on the plug and never on the cable

itself.



If you notice visible damage to the blender or the power cord, switch the device off,

disconnect the mains plug from the wall outlet and contact customer services (see

"Guarantee Information" on page 21).



Only connect the blender to a properly installed, easily accessible wall outlet whose

mains voltage corresponds to that on the rating plate. After connecting the device, the

wall outlet must still be easily accessible so that you can remove the mains plug quickly in

the event of an emergency.



Never immerse the motor unit (6), the power cord (5) or the mains plug in water or other

liquids. If liquid does penetrate the motor unit (6), disconnect the mains plug from the

wall outlet immediately and contact customer services (see "Guarantee Information" on

page 21).

Warning about property damage



Do not leave the blender unattended while running so you can react quickly in the case

of hazards.

SilverCrest SSM 550 E1

English - 9

Risk of overheating and fire



Only ever operate the blender with the blender jug filled and never empty.



Do not use the appliance in direct sunlight or near heating appliances (heaters, stoves,

ovens etc.).



Do not place hot or boiling foods in the blender jug. Otherwise the motor unit could

overheat or the blender jug glass could crack. Always leave hot or boiling foods to cool

down first before adding them to the blender jug (3) and processing with the blender.

Injur

y



Never open the lid (2) while the blender is running. Otherwise, rotating bits of food may

be ejected with great force.



Never reach into the blender jug while the blender is running because the cutting blade

is extremely sharp and rotates quickly.



Never insert cutlery or other stirring implements into the blender jug while the blender is

running as the cutting blades rotate very quickly and may cause considerable damage

and injury.

Before you start

Unpack the device. First check whether all the parts are complete and undamaged. If any items are

missing or damaged, please phone our hotline (see "Guarantee Information" on page 21). Keep the

packaging material away from children and dispose of appropriately.

Getting started

The blender jug (3) should be cleaned before first use. For more on this, please refer to the "Maintenance

/ cleaning" section on page 17.

Blender setup

1. Unwind the power cord (5) and feed it through the notch on the bottom of the motor unit (6).

2. Place the motor unit (6) on an even, non-slip and dry surface. Do not connect the power cord (5)

plug to the wall outlet yet!

SilverCrest SSM 550 E1

10 - English

Use

Filling the blender jug

1. Remove the lid (2) and measuring cap (1) from the blender jug (3).

2. Add the desired ingredients to the blender jug (3).

3. Place the lid (2) back on the blender jug (3). In so doing, ensure that the pouring spout on the

blender jug (3) is also closed.

4. Place the measuring cap (1) in the opening of the lid (2) and lock the measuring cap (1) into

position. To do this, turn it in a clockwise direction.

Attaching the blender jug to the motor unit

Warning!

If the rotary switch (4) is set at one of the various power levels, the blender will turn on as

soon as you place the blender jug on the motor unit.

1. If the mains plug is connected to the wall outlet, remove it from the wall outlet.

2. Check that the blender's rotary switch

(4) is in the OFF position.

3. Place the blender jug (3) on the motor unit (6) and lock it into position. To do so, rotate the blender

jug (3) slightly until it can be pressed down.

4. Connect the power cord (5) mains plug to a live wall socket.

Warning!

Make sure the power cord is not in your working area. Otherwise you could pull it

inadvertently and knock the blender over.

Switching on / selecting speed

The blender can only be switched on once the blender jug (3) is properly locked into position

and correctly seated on the motor unit.

Warning!

The lid (2) may come loose on speed level 5 when the blender jug (3) is filled to the

maximum. This can cause the contents to be catapulted out. If necessary, hold the lid (2) down

with your hand.

1. Select the desired speed using the rotary switch (4).

SilverCrest SSM 550 E1

English - 11

Speeds 1 to 3 For mixing, blending and pureeing liquid or semi-solid foods

Speeds 3 to 5 For chopping and for more solid foods

Ice Crush/Clean For crushing ice and short pulses at high speed. Also for cleaning the cutting blades.

The rotary switch does not remain engaged in this mode to avoid excess strain on

the motor. You should therefore only ever use this function for a very brief period.

To crush ice, you should fill the blender jug (3) with a maximum of 180g of ice cubes.

Otherwise the ice will not be perfectly crushed.

Filling the blender jug while the blender is running

Warning!

When the blender is running, only ever open the measuring cap (1) and not the entire blender

jug (3) lid (2). Otherwise rotating food could be catapulted out.

When the measuring cap (1) is open, never insert cutlery or other items into the blender jug

(3). There is a danger of injury!

Proceed as follows to add ingredients while the blender is running:

1. Rotate the measuring cap (1) in an anti-clockwise direction and remove it.

2. Add the desired ingredients to the blender jug (3).

3. Close the measuring cap (1). To do so, insert it into the lid (2) and tighten in a clockwise direction.

Removing the blender jug from the motor unit

1. Place the rotary switch (4) in the Off position. If you are finished blending, disconnect the mains plug

from the wall outlet.

2. Once the motor has stopped running, lift the blender jug (3) vertically off the motor unit. There is no

need to rotate the blender jug (3) to do this.

SilverCrest SSM 550 E1

12 - English

Sample Recipes

This section contains some versatile recipes that can be altered to suit individual tastes by replacing certain

ingredients.

Mojo Picón

This spicy paprika sauce is a recipe from the Canary Islands and is served with potatoes boiled in their

skins with lots of coarse salt (Papas arrugadas) there. Also delicious with grilled meats or fish.

 4 red peppers

 1-2 chillies

 1 head of garlic

 200ml olive oil

 50ml white wine vinegar

 Cumin

 Paprika (sweet or hot to suit personal taste)

 Salt

Chop the peppers into small pieces. Halve the chillies lengthways, remove and discard the seeds. Chop

finely. Place in the blender jug together with the oil and vinegar. Peel the head of garlic and press.

Puree for approx. one minute on speed level 3.

Season with salt, paprika and cumin and stir through again briefly before serving.

SilverCrest SSM 550 E1

English - 13

Guacamole

This extremely healthy avocado cream is popular throughout the South America region. Whether served

with Mexican nachos or Argentinian steak, this green cream is a highlight for many dishes.

 2 ripe avocados

 2 tomatoes

 2-4 cloves of garlic to suit personal taste

 ½ lime or lemon

 Salt and pepper

Halve the avocados and remove the stone. Remove the flesh of the fruit from the skin with a tablespoon

and chop coarsely.

Place the avocados in the blender jug. Press the garlic and add to the jug as well. Squeeze the lime or

lemon and pour in the juice. Puree for approx. one minute on speed level 3. Season with salt and pepper,

add more lime juice and garlic to taste and stir through briefly. Transfer the avocado cream to a bowl.

Chop the tomatoes into small pieces and stir through the avocado cream by hand. Do not leave to stand

too long or the cream will go brown. Sprinkle with lemon or lime juice if necessary.

Piña Colada

The classic Caribbean cocktail made with pineapple and coconut.

For 1 cocktail:

 100g ice cubes

 5cl white rum

 2cl dark rum

 4cl cream

 4cl coconut cream

 10cl pineapple juice

Place the ice cubes in the blender jug and crush at intervals in the "Ice Crush/Clean" position.

Place the crushed ice in a cocktail glass.

Place all other ingredients in the blender jug and blend on speed 1 then beat on speed 3 until frothy. Pour

into the cocktail glass over the ice. Decorate with a pineapple wedge and cocktail cherry on the rim of the

glass and serve with a straw.

SilverCrest SSM 550 E1

14 - English

Frozen Cappuccino

 100g ice cubes

 1 cup of strong cold coffee

 1 cup of vanilla ice cream

Place the ice cubes in the blender jug and crush at intervals in the "Ice Crush/Clean" position.

Add the vanilla ice cream and mix on speed 3. Add the cold coffee and blend briefly on speed 1.

Serve immediately.

Smoothie

Serves 4

 350g berries (e.g. strawberries, raspberries, blueberries or blackberries)

 1 banana

 500ml orange juice

 1 tbsp honey

Wash and clean the berries, halving the strawberries. Slice the banana and place all ingredients in the

blender jug. Mix for approx. 30 seconds on speed 4. Serve immediately.

Tip: Particularly delicious in summer with frozen berries. For this, first pulse the berries in the "Ice

Crush/Clean" position and then add the remaining ingredients and blend briefly on speed 4.

SilverCrest SSM 550 E1

English - 15

Bulgarian Tarator

Refreshingly light dish, especially tasty on hot summer days. Serve with fresh bread or jacket potatoes.

 500g natural yoghurt

 400g cucumber

 4 cloves of garlic

 1 bunch of dill

 50g walnuts

 50 ml olive oil

 400ml cold water

 Salt and pepper

Roughly chop the walnut halves on a chopping board with a knife. Slice the cucmbers and place in the

blender jug with the yoghurt. Press and add the garlic. Cut the dill over the blender jug with scissors. Puree

everything briefly on speed 4. Add the chopped nuts, water and olive oil and mix again (speed 2 or 3).

Season with salt and pepper.

Garnish with a little dill and a walnut half.

Tropical Shake

A refreshing cocktail for summer.

 125 g ice cubes

 50 ml orange juice

 60ml papaya juice

 125 ml pineapple juice

 ½ small can of peaches with juice

Place the ice cubes in the blender jug and crush at intervals in the "Ice Crush/Clean" position. Add the

remaining ingredients to the blender jug and blend on speed 3.

SilverCrest SSM 550 E1

16 - English

Hawaii Mix

A lively cocktail for parties.

 ¼ l pineapple juice

 ¼ l rum

 ½ l milk

 2 tbsp honey

 4 bananas

Peel the bananas, place in the blender jug and puree on speed 2. Add the remaining ingredients to the

blender jug and blend on speed 1.

Banana Shake

The classic among shakes.

 ½ l milk

 A little lemon juice

 2 bananas

 Approx. 1-2 tbsp sugar or vanilla sugar (depending on taste and how ripe the bananas are)

Peel the bananas, place in the blender jug and puree on speed 2. Add the milk, lemon juice and sugar

little by little and blend until everything is evenly mixed.

Serve cold.

Cosmopolitan

Not just for the jazz club.

 12ml Cointreau

 25ml red berry juice

 Juice of ½ lime

 6 ice cubes

 40ml vodka

Place the ice cubes in the blender jug and crush at intervals in the "Ice Crush/Clean" position. Add the

remaining ingredients to the blender jug and blend on speed 3.

SilverCrest SSM 550 E1

English - 17

After use

After use clean the blender as described in the "Maintenance/Cleaning" section below. Wrap the power

cord (5) around the cord wrap (7) and store the blender in a safe and dust-free place.

Maintenance / cleaning

It is recommended that you clean the blender before first use and immediately after each use so that no

remnants of food can set in the blender jug (3).

The quickest and easiest way to clean the blender jug (3) inside is to rinse it briefly under the tap and then

proceed as follows:

1. Fill the blender jug (3) with approx. 750ml water.

2. Add a few drops of washing-up liquid, close the lid and place the blender jug (3) on the motor unit.

3. Connect the power cord (5) mains plug to a wall outlet and move the rotary switch (4) to the "Ice

Crush/Clean" position several times.

4. Rinse the blender jug (3) out with plain water.

This will generally be sufficient to clean the cutting blades and the interior of the blender jug (3). If you

find it is not sufficient, proceed as described in the "Cleaning the blender jug manually" section below.

Risk of electric shock!



Always remove the mains plug from the socket before cleaning. Failure to do so could

cause an electric shock.



Do not pour or spray any liquids onto the motor unit (6) and do not immerse it in water

or other liquids. This could cause short circuits which could cause electric shocks or burns.

Warning about property damage



Do not use abrasive or astringent detergents or tools which could scratch the surface.

This could cause damage to the motor unit (6) housing.

Clean the motor unit (6), plastic parts and the power cord (5) with a dry or damp cloth.

The lid (2) and measuring cup (1) can be rinsed or cleaned in the dishwasher as normal.

SilverCrest SSM 550 E1

18 - English

Cleaning the blending jug manually

Injur

y

The cutting blades are extremely sharp. The interior of the blending jug is best cleaned with a

long-handled dishwashing brush.

You can leave the blender jug (3) assembled and rinse as normal.

The blender jug (3) can be conveniently cleaned in the dishwasher. To do so, disassemble the

blender jug as described below.

For stubborn dirt, you can also disassemble the blender jug (3) as follows and then clean it.

Disassembling the blender jug

1. Rotate the plastic base anti-clockwise to loosen it and separate it

from the glass container (A) (see arrow). Take care not to lose the

sealing ring (B) in the process.

2. Clean the glass container (A), the sealing ring (B), the plastic base

(D) and the cutting blades (C) in the sink or dishwasher.

3. Reassemble the glass container (A), sealing ring (B) and plastic

base (D) and screw back onto the plastic base (D) in a clockwise

direction.

Page is loading ...

Silvercrest SSM 550 E1 User Manual And Service Information

Silvercrest SSM 550 E1 User Manual And Service Information

in other languages

Related papers

Other documents