Barco Galaxy 12 HB Owner's manual

Type
Owner's manual
Barco service bulletin
Serial Number: InfoT
Date: 12/12/2006
Product: Galaxy 12HB+/Galaxy 7 Classic +
Priority code*: D
A.
”Must” modification, Barco will provide t he necessary components to per form this mo difica tion
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of the product.
D.
For information only.
1. NEW GALAXY SERIES
1.1 Description
Introduction
The existing Galaxy range has been replaced by a new Galaxy range containing following
projectors :
Product number Product name
R9040361
Galaxy 7 Classic+
R9040371
Galaxy 12 HB+
The Galaxy 7 Classic+ can be operated in Economy m ode (light output and lifetime is then
comparable to the 4LL+ ).
The G alaxy 12 HB + allows to operate in normal or Co ntrast en han cem e nt mode.
Options
Option name Description
Active Infitec+ is now enabled by purchasing a software
key and by entering it in the projector
menu
Passive Infitec+ (L or R) This option must be specified when
ordering (cannot be installed in the field)
Note that mono versions are discontinued
Read the new Galaxy range owners manual R59 77 00 40 for mo re infor-
mation
Barco nv Simulation Products
Noordlaan 5,
B-8520 Kuurne
www.barco.com
Page 1 of 2
Barco service bulletin
Firmware
New firmware has been developed for both projectors (the Galaxy 7 Classic+ and the Galaxy
12 HB+) :
Firmware number Version Projector
R32923200 3.00
Galaxy 7 Classic+
R32923100 3.00
Galaxy 12 HB+
CAUTION: This software is not backwards compatible i.e. it can not be in-
stalled on the former Galaxy projecto rs !
InfoT:
InfoT
Page 2 of 2
  • Page 1 1
  • Page 2 2

Barco Galaxy 12 HB Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI