Cornelius Flavor Fusion ADA decal Operating instructions

ADA Decal Installation Instructions

INSTALLATION INSTRUCTIONS

ADA DECAL LOCATIONS

Decal Installation

1. To place decals in the proper locations on the ADA keypad, refer to the figure above. Each side of the

unit has three groups of four buttons. The decals are placed on the ADA keypad in the locations

shown.

2. The top group (1-4) is connected to the far left group on the upper panel.

3. The middle group (B1-B4) is connected to the middle group (yellow buttons) on the left side of the

upper panel.

4. The lower group (5-8) is connected to the right hand group (closest to the center) on the left side of

the upper panel.

5. The top group (9-12) on the right side, is connected to the left hand group (closest to the center) on

the right side of the upper panel.

6. The middle group (B5-B8) is connected to the middle group (yellow buttons) on the right side of the

upper panel.

7. The lower group (13-16) is connected to the far right group on the upper panel.

Revision Date: April 07, 2014 www.cornelius.com Revision: B