ZyXEL LTE3311 series Owner's manual

Brand: ZyXEL

Model: LTE3311 series

Category: Routers

Type: Owner's manual

This manual is also suitable for

LTE3311-Q222

www.zyxel.com

LTE3311 Series

LTE Indoor Gateway

Version 1.00

Edition 1, 06/2015

Default Login Details

LAN IP Address http://192.168.1.1

User Name admin

Password 1234

Quick Start Guide

Panels

DC POWER IN

LAN

PORTS 1-4

USIM/SIM

ON/OFF

BUTTON

ANTENNA

CONNECTOR1

ANTENNA

CONNECTOR2

POWER

RESET

BUTTON

CARD SLOT

WPS ON/OFF

BUTTON

PHONE

Requirements

Make sure you have the following before you start:

• INTERNET ACCESS: You need a SIM card from an LTE ISP

(Internet Service Provider). You may also need a PIN code, APN, or

IP address to use the SIM card.

• WEB BROWSER: Use one of the following browsers with

JavaScript enabled to access the Internet and/or access the

LTE3311’s Web Configurator:

• IE 8 and later versions

• Firefox 33.0.2 and later versions

• Chrome 38.0.2125.111 and later versions

• Opera 25.0 and later versions

• Safari 5.1.7 and later versions

Hardware Connections

Make sure the LTE3311 is off and follow the steps listed below for the

hardware connections.

1. Install the antennas.

2. SIM CARD: Insert your SIM card to the SIM card slot for the LTE

network access.

3. LAN: Use an Ethernet cable to connect a computer to one of these

ports for initial configuration and/or Internet access.

4. POWER: Use the power adaptor provided with your LTE3311 to

connect an appropriate power source to this socket.

5. Push in the power button to turn the power on.

6. USB: Connect the USB device to the LTE3311’s USB port for sharing

files.

Look at the LEDs (lights) on the front panel.

•The POWER light is green when the LTE3311 is receiving power

and functioning properly. It blinks when the LTE3311 is in the

process of starting up.

•The INTERNET light is green when Internet access is available and

it is off when Internet access is unavailable. It blinks when

transmitting data.

•The LTE light is green when the LTE3311 is connected to the LTE

network.

•The 3G/2G light is green when the LTE3311 is connected to the 3G/

2G network. It blinks slowly when the LTE3311 is searching for a

channel.

•The 3G/LTE SIGNAL STRENGTH light displays the 3G/LTE

connection’s signal quality. The LED shows the best signal

quality. The LED shows the medium signal quality. The LED

shows the lowest signal quality.

POWER

INTERNET

LTE

WLAN/

PHONE

3G/LTE SIGNAL

STRENGTH

WPS

3G/2G USB

• The WLAN/WPS light stays on and green when the 2.4GHz band

wireless LAN is ready. The light will not turn on if the wireless

connection is not activated. It blinks orange per 0.5 seconds after

you press the WPS button. The process takes up to 2 minutes within

which you can add a WPS-enabled device to the wireless network.

See the User’s Guide for more information.

• The PHONE light is green when a SIP account is registered for the

phone port. It blinks green when there is an incoming call or a

telephone connected to the phone port has its receiver off of the

hook. The PHONE light is orange when a SIP account is registered

for an outgoing call and there is a voice message in the

corresponding SIP account. It blinks orange when a telephone

connected to the phone port has its receiver off of the hook and

there is a voice message in the corresponding SIP account. It is off

when the phone port does not have a SIP account registered or the

LTE3311 is not receiving power.

• The USB light is green when the LTE3311 has a USB device

installed. It blinks green when the LTE3311 is transmitting and/or

receiving data from routers. It is off when there is no USB device

connected to the LTE3311.

If the POWER light does not turn on during start up, disconnect the LTE3311’s

power, check the connections, wait a few seconds and connect it again. If the

problem persists, you may have a hardware problem and you need to contact your

vendor.

Set Up a Wireless Connection

The LTE3311’s wireless LAN is enabled by default. Use the wireless

SSID (network name) and encryption key on the back panel to manually

add a wireless client to the network. Refer to the User’s Guide if you

wish to use WPS (Wi-Fi Protected Setup) instead.

1. Right-click the wireless connection icon in the bottom right of your

computer monitor. Click View Available Wireless Networks.

WiFi SSID: ZyXEL_xxxx (xxxx is the last 4 digits of the

WiFi Key: xxxxxxxxxxxxx (13 random alphanumeric

MAC address)

characters.)

2. Select the LTE3311’s SSID name and click Connect (A). The SSID

“SecureWirelessNetwork” is given here as an example.

3. When prompted for a password, enter the (WPA2-PSK) encryption

key from the back panel of the LTE3311 and click Connect.

4. You may have to wait several moments while your computer connects

to the wireless network.

5. You should now be securely connected wirelessly to the LTE3311.

If you cannot connect wirelessly to the LTE3311, check that you selected the

correct SSID and entered the correct security key. Make sure the LTE3311’s

WLAN is enabled and the WLAN/WPS LED is on.

1010

Connect to the Internet

1. Open your browser and go to http://192.168.1.1.

• If your service provider’s LTE login page appears instead of

your default Home page then all you need to do is enter the

screen instructions. The LTE3311 should then automatically

update itself with the settings that you need to connect to

the Internet.

• If your service provider’s LTE login page does not appear, do

the following:

2. Enter the default username “admin” and password “1234”. Click

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScript and Java permissions. Your computer should also be

set to get an IP address automatically from a DHCP server. See your User’s

Guide for more information.

3. Change a new password.

4. If the INTERNET light is off, manually configure the Internet

connection. Click Configuration > Network > WAN and then the

Modify icon.

The APN identifies the LTE network to which your LTE Modem connects.

5. Select the Manual radio button to check the APN string and change it

if it is different than what you got from your ISP vendor. Change other

settings on this page also if necessary. Click Apply.

1212

6. Wait for the INTERNET light to turn on and then try browsing to a

website.

• For more information see the WAN section in the User’s Guide.

• To configure wireless access, go to Configuration > Network >

Wireless LAN.

• To set up WPS using the Web Configurator, go to Configuration >

Network > Wireless LAN > WPS.

Using the Wizard

You can use the wizard to quickly configure your login password, time

zone, the WAN and WLAN settings.

1. Click the Wizard icon at the top-right corner of the screen.

2. The Setup Wizard screen displays. Click Next.

1414

3. The system automatically detects your time zone. If the result is not

correct, press Detect Again or select a proper one manually. Click

Next.

4. Select the Country and the Service Provider, and the corresponding

APN name will display in the APN Name field. If the field displays

wrong name, specify the right APN name in the APN Name field.

Click Next.

5. Configure the wireless LAN settings and then click Next.

6. Configure the wireless security settings and then click Next.

1616

7. Review the summary of all the settings you just configured and click

Apply Settings to save the changes to the system.

The system will restart itself. Wait for a few seconds to get the system

ready before you can access it again or surf the Internet.

Go to www.zyxel.com to view this product's certifications.

For more information, please refer to the User’s Guide at the www.zyxel.com download library.

Network standby power consumption < 12W

Off mode power consumption < 0.5W

EU Importer: ZyXEL Communication A/S, Generatorvej 8D, 2860 Søborg, Denmark. http://

www.zyxel.dk

US Importer: ZyXEL Communications, Inc | 1130 North Miller Street Anaheim, CA 92806-2001 |

http://www.us.zyxel.com

Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for

Waste Electronics and Electrical Equipment. It means that used electrical and electronic

products should not be mixed with general waste. Used electrical and electronic equipment

should be treated separately.

ZyXEL LTE3311 series Owner's manual

Brand: ZyXEL

Model: LTE3311 series

Category: Routers

Type: Owner's manual

This manual is also suitable for

LTE3311-Q222

Download PDF

report

ZyXEL LTE3311 series Owner's manual

This manual is also suitable for

ZyXEL LTE3311 series Owner's manual

Related papers

Other documents