2. Whistler
  3. WS1095

Whistler WS1095 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Whistler WS1095 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALL BRACKET
Also Included:
• MachineScrew(4)
• SelfTappingScrew(2)
• LockWasher(2)
• RubberWasher(2)
• RubberFeet(5)
• Knob(2)
• RemoteHeadMountingBracket
• LANCableforRemoteHead
• DCCablewithFuse
• SDCard(InstalledinScanner)
• User’sGuide
Mounting
Bracket
For desktop use:
1. Attachtheveprotectiverubberfeettothemounting
bracket.
2. Slidethescannerintothebracket,aligningthescanner’s
sideholeswiththeholesinthebracket,andthenscrewthe
mountingknobsintothescanner.
RefertoyourUser’sGuideforbracketmountingand
vehicleinstallation.
Package Contents:
DESKTOP/MOBILE
RADIO SCANNER
Quick Start Guide WS1095
START HERE!
Scanner
ACAdapter
Antenna
1. Aligntheslots.
2. Rotateconnector.
AC Power
1. Connectthesuppliedadaptertothescanner’sDC
13.8Vjack.
2. Plugtheadapterintoastandardhouseholdpower
socket.
3. Todisconnect,unplugtheadapterfromthepower
sourcerst.
See the Owner’s Guide for complete instructions
INSTALL ANTENNA
P/N581005b02E15©TheWhistlerGroup,Inc.
USBCable
1. Pressthebuttonforonesecond.
2. Usethe///tosetthedateandtime.PressSELtosave.
3. SelectBrowseLibrary.
4. Selectcountry.
5. SelectrstletterofState/Province.
6. SelectState/Province.
7. SelectCounties/Cites.
8. SelectrstletterofCounty.
9. SelectCounty.
10. SelectDataTypeNOTE:Police/FireandEmergencyserviceswillbein“Categories”forsmaller
towns,“Systems”forlargerones.
11. Selectdesiredagency,categoryorsystemavailableforthecounty.
12. Selectdesiredsubcategory.Investigatelistingsbypressingtogodeeperintothatselection.
Whenthecursorswitchesfromtherightsideofthescreentotheleft,youareatthebottomof
acategory.NOTE:WhenselectingaSystem,checkatleastoneofthe“Sites”inrange,thengo
furtherintoCategoriestondobjects.
13. UsetheSELbuttontocheckboxesforservicesyouwishtomonitor.PressSELtoun-checka
selectedserviceandatanytimepresstogoback.Oncealldesiredobjectshavebeenchecked,
pressMENU.
14. SelectImportSelected.
15. SelectdesiredScanlistlocationforselectedobjectsandpresstosave.
16. PressSELtocontinuetomainmenu.
17. SelectScanlistsfrommainmenu.Usethe///torenamethescanlistifdesired.Conrm
boxbesidedesiredscanlistischecked.
18. Repeatstepstoaddadditionalscanlists,orselectScanfromtheMainMenutobeginscanning.
NOTE:Whentravelingorforquickprogramming,refertolocationbased,ZIPcodeprogramming,
beginningonpage28oftheUser’sGuide.
STEP-BY-STEP PROGRAMMING
/