Metra HE-PBHL702RGB User manual

Metra
Brand
Metra
Model
HE-PBHL702RGB
Type
User manual

Metra HE-PBHL702RGB is a 7-inch LED headlight replacement kit designed for Jeep Wranglers from 1997 to present. This kit includes two headlights, an RGB control box, and necessary adapters for installation. The headlights feature four 10-watt Cree LEDs per housing, providing a bright and efficient light output. The low beam draws 1.9a @ 13.8v, while the high beam draws 2.7a @ 13.8v. The LED color temperature is 6500K, producing a cool white light.

The RGB control box allows you to customize the color of the halos around the headlights. You can control the halos using the included RF remote or by downloading the BLEDIM app on your mobile device. The app lets you choose from a variety of colors and effects, allowing you to personalize the look of your Jeep.

Metra HE-PBHL702RGB is a 7-inch LED headlight replacement kit designed for Jeep Wranglers from 1997 to present. This kit includes two headlights, an RGB control box, and necessary adapters for installation. The headlights feature four 10-watt Cree LEDs per housing, providing a bright and efficient light output. The low beam draws 1.9a @ 13.8v, while the high beam draws 2.7a @ 13.8v. The LED color temperature is 6500K, producing a cool white light.

The RGB control box allows you to customize the color of the halos around the headlights. You can control the halos using the included RF remote or by downloading the BLEDIM app on your mobile device. The app lets you choose from a variety of colors and effects, allowing you to personalize the look of your Jeep.

7” Replacement Headlights with RGB Halos for
JEEP WRANGLERS
HE-PBHL702RGB
Applications: 1997-Current Jeep Wranglers
NOTE: An RGB control box is still required (sold separately):
HE-2CHRGBC (If you are ONLY installing the HEISE 7” RGB
headlights OR HEISE RGB fog lights)
HE-4CHRGBC (If you are installing both HEISE RGB 7” headlights
AND the HEISE RGB fog lights)
Tools Needed – Flat head screwdriver, T-15 Torx bit
Instructions:
1. Open hood and remove the 6 push pin clips across the
top of the grille and remove them with a flat head
screwdriver.
2. Unsnap grille and unplug turn signals that are located in
the grille.
3. Remove the (4) T-15 Torx screws from the ring that is
holding each headlight in the vehicle.
4. Unplug and remove the headlight.
5. For 1997-2006 Jeep Wranglers continue to step 7.
6. For 2007 to current Jeep Wranglers, the included H4
adapter and Canbus decoder are needed to complete
install.
7. Plug in the new HEISE headlight, and secure it in place
with the previously removed ring and T-15 Torx screws.
8. RGB Halos – Mount and connect RGB control box per
the instructions that came with it. Plug in the 4 pin
connector from the controller to the 4 pin harness on
the headlight.
9. Download the BLEDIM app from the Play Store or the
App Store or scan the QR code (found on the control
box) to control the RGB halos with your mobile device
or use the included RF remote.
10. Repeat previous steps to install the other headlight.
11. Turn on headlights and make sure they are aimed
properly so not to blind oncoming traffic.
12. Reinstall grille by plugging turn signals back in and snap
grille back into place.
13. Reattach the 6 push pin clips across the top of the grille
to complete install.
WARNING: THIS REPLACEMENT LED HEADLIGHT IS SOLD FOR OFF-
ROAD USE ONLY. This product should not be used on the road. This
product has not been tested for compliance with United States
Federal Motor Vehicle Safety Standard FHMVSS 108 or Canadian
Standard CMVSS108. It should not be used on the road or in any other
application requiring compliance with FHMVSS 108, CMVSS108 or Title
49 section 571.108, United States Code.
Specifications:
(4) 10 watt Cree LEDs per housing
2000LM low beam draws 1.9a @ 13.8v
3000LM high beam draws 2.7a @ 13.8v
LED color temp: 6500K
H4 connector
H4 to H13 and CANBUS adapters included for 2007 and newer Jeep Wranglers
Dust/Water resistance: IP67
1-800-221-0932 www.HeiseLED.com
460 Walker Street, Holly Hill, FL 32117
  • Page 1 1
  • Page 2 2

Metra HE-PBHL702RGB User manual

Metra
Brand
Metra
Model
HE-PBHL702RGB
Type
User manual

Metra HE-PBHL702RGB is a 7-inch LED headlight replacement kit designed for Jeep Wranglers from 1997 to present. This kit includes two headlights, an RGB control box, and necessary adapters for installation. The headlights feature four 10-watt Cree LEDs per housing, providing a bright and efficient light output. The low beam draws 1.9a @ 13.8v, while the high beam draws 2.7a @ 13.8v. The LED color temperature is 6500K, producing a cool white light.

The RGB control box allows you to customize the color of the halos around the headlights. You can control the halos using the included RF remote or by downloading the BLEDIM app on your mobile device. The app lets you choose from a variety of colors and effects, allowing you to personalize the look of your Jeep.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents