BLACK JACK 5527-1-30 Installation guide

Type
Installation guide

This manual is also suitable for

PROJECT HOW
PROJECT HOW
-
-
TO
TO
S
S
@ WWW.GARDNER
@ WWW.GARDNER
-
-
GIBSON.COM COPYRIGHT
GIBSON.COM COPYRIGHT
©
©
2008, 2009, 2010 GARDNER
2008, 2009, 2010 GARDNER
-
-
GIBSON, INC.
GIBSON, INC.
Clear roof surface of loose debris
including dirt, gravel, sticks, etc. using
a push broom or blower. Wash away
surface dirt with a pressure washer.
On a clear, warm, sunny day (65°F and
rising), apply Black Jack, Gardner or
STA-KOOL Elastomeric Roof Coating
to a dry roof surface. Cut in along
edges, then move from one end of the
roof to the other keeping a continuous
wet edge. Follow all label directions.
Patching material: brush or trowel
as indicated on container instructions.
Elastomeric coating: Roof brush,
¾” nap roller, or airless spray in 10”-
12” pattern, 2000 psi, .021 to .025
spray tip
•Metal
Urethane/polystyrene foam
Concrete roofs
Aged roll roofing, existing
aluminum & white coatings
Flat and barrel cement tile
Metal
How to apply elastomeric Cool Roof coatings: 3 easy steps
How to apply elastomeric Cool Roof coatings: 3 easy steps
STEP 1: CLEAN THE SURFACE
STEP 1: CLEAN THE SURFACE
STEP 3: APPLY COOL ROOF COATING
STEP 3: APPLY COOL ROOF COATING
RECOMMENDED APPLICATORS
RECOMMENDED APPLICATORS
COVERAGE: 2 COATS RECOMMENDED
COVERAGE: 2 COATS RECOMMENDED
RECOMMENDED SURFACES
RECOMMENDED SURFACES
STEP 2: REPAIR & REINFORCE
STEP 2: REPAIR & REINFORCE
Patch and repair cracks, blisters and
other problem areas using Black Jack
Roof-Patch or STA-KOOL White
Acrylic Roof Sealant , following
label directions. Reinforce with
Universal Patching fabric.
1
1
2
2
3
3
80-100 sq
ft./ gal
Porous surfaces including
foam, concrete, tile, roll
roofing, and previously
coated surfaces
50-75 sq.
ft./gal
  • Page 1 1

BLACK JACK 5527-1-30 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI