Episode KIT-ES-LS-SAT-4 User guide

Episode
Brand
Episode
Model
KIT-ES-LS-SAT-4
Type
User guide

This manual is also suitable for

CROWN AMPLIFIER CONNECTIONS
Rev:160915-0900
CR
-
CDIX000
-
LSCAPE CROWN AMPLIFIERS
USING THE ART CLEANBoxPro WITH THE CROWN AMPLIFIER FOR EPISODE LANDSCAPE
1. Connect your Un-balanced source to the RCA input (CH1 & CH2) of the CLEANBoxPro.
2. Connect XLR (female end) to Balanced output (CH1 & CH2) to the CLEANBoxPro.
3. If the XLR cable has the male connector on the other end, cut-off to expose the positive, negative, and ground
conductors.
4. Terminate the conductors, for both CH1 & CH2, to either the spare Phoenix connectors of the Crown amp or
repurpose the phoenix connectors from the summing cable, according to the following sequence.
1 Ground
2 Positive
3 Negative
3 1 2 3 1 2
5. Connect a jumper from CH1 phoenix connector to CH2 phoenix connector for each terminal according to the
following.
Ground
Ground
Positive
Positive
Negative
Negative
3 1 2 3 1 2
Un-balanced Ports
Female End
CLEANBoxPro
6. Connect each phoenix connector to the appropriate channel on the Crown Amplifier (be mindful that the channels
are in different physical sequence on the rear of the Crown, as compared to the sequence of the CLEANBoxPro).
3 31 12 2
CONTACT TECH SUPPORT
Need Help? Contact Tech Support!
If you need further clarification, please call tech support at 866.838.5052, or email support@snapav.com. For other
information, instructional videos, support documentation, or ideas, visit our website and view your item’s product page
at www.snapav.com.
Phone: (866) 838-5052
Email: Techsupport@SnapAV.com
Rev: 160919-0300
  • Page 1 1
  • Page 2 2

Episode KIT-ES-LS-SAT-4 User guide

Episode
Brand
Episode
Model
KIT-ES-LS-SAT-4
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents