Cecilware FFW575-Q Datasheet

Type
Datasheet

This manual is also suitable for

Cecilware FFW575-Q is a food warmer that can be used to keep french fries warm and crispy. It comes with an attached cord and can be plugged into a standard 120-volt 15-amp/ grounded outlet. The unit has been shipped with the incandescent lamps installed. Before turning the warmer on, remove the protective cardboard tube from the lamps.

The FFW575-Q has a heating element that can be replaced if it becomes damaged. To replace the heating element, place the warmer on its side, remove the two screws from the access covers at the front and rear of the unit, and remove the covers.

Cecilware FFW575-Q is a food warmer that can be used to keep french fries warm and crispy. It comes with an attached cord and can be plugged into a standard 120-volt 15-amp/ grounded outlet. The unit has been shipped with the incandescent lamps installed. Before turning the warmer on, remove the protective cardboard tube from the lamps.

The FFW575-Q has a heating element that can be replaced if it becomes damaged. To replace the heating element, place the warmer on its side, remove the two screws from the access covers at the front and rear of the unit, and remove the covers.

STAHOTFRENCHFRYWAR MER
Installation:
TheFFW575QandMaresuppliedwithanattachedcordandmaybepluggedintoastandard120volt15amp/grounded
outlet.Thisunithasbeenshippedwiththeincandescentlampsinstalled.Removetheprotective cardboardtubefromlamps
beforeturningthewarmeron.
CAUTION:
Donotinstallcloserthanone(1")inchtoawall.
ServiceInstructions:
Disconnectpowerandmakesureheatingelementiscooltopreventburnbeforeattemptinganyrepairs.
LampReplacement:
Simplyunscrewlampfromsocket,discarddefectivelampandscrewnewlampintosocket.
HeatingElementReplacement:
Placewarmeronitsside.Removetwoscrewsfromaccesscoversatthefrontandrearoftheunitandremovethecovers.
Removeflagterminalsfromheaterendsandremoveheater.Pushflagterminalsontoendsofnewheater,makingsure
terminalsarepushedonsecurely,asaloose
terminalwillcausearcing.Positiontheelementinunitsothatgrooveinporcelain
endcapisnestedinnotchofbracket.Holdtheelementinplaceandreplaceoneaccesscover,makingsurethatverticallegof
accesscoverisbetweenelementholderandreflector,securewithtwoscrews.
Installsecondaccesscoverinthesamemanner.
SwitchReplacement:
Removethefrontaccesscover.Removenutsecuringswitchtothefrontofthehousingandpulltheswitchoutfrominside
housing.Disconnectswitchwirestakingnoteoftheirlocation.Reconnectwirestonewswitchandreinstallbyreversing
removalprocedure.
WARRANTY
EveryCecilwareproducthasbeencarefullyinspectedbeforeshipment.Thefinestofmaterialsandthehigheststandardsofworkmanshiphave
beenbuiltintotheequipment.
Withinoneyearofpurchase,shouldanyCecilwareProductshowdefectinfactoryworkmanshipormaterial,weagreetorepair,atouroption
orreplace
withoutcosttousersuchpartswhich,proveuponfactoryinspectiontohavebeensodefective.Allequipmentmustbeshipped
transportationchargesprepaidoracceptance.Thiswarrantycoversreplacementpartsonly.Laborchargesarecoveredto90daysafter
installation.
Thiswarrantydoesnotapplyunderthefollowingconditions:
Neglectorabuseofequipment
Excessivelimecondition
Improperinstallation
Anyoutsidemodificationtoequipment
EveryCecilwareurnbodyiscoveredforthreeyears.Thiswarrantycoversthestainlesssteelbodyandstainlesssteellinersonly.
Portable,equipmentsuchasElectricFryers,FoodWarmers,ElectricStoves,Dispensers,
PluginUrns,Coffeebrewers,andWarmersmustbe
returnedtothefactoryorbroughttoanauthorizedservicestationforrepair.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Cecilware FFW575-Q Datasheet

Type
Datasheet
This manual is also suitable for

Cecilware FFW575-Q is a food warmer that can be used to keep french fries warm and crispy. It comes with an attached cord and can be plugged into a standard 120-volt 15-amp/ grounded outlet. The unit has been shipped with the incandescent lamps installed. Before turning the warmer on, remove the protective cardboard tube from the lamps.

The FFW575-Q has a heating element that can be replaced if it becomes damaged. To replace the heating element, place the warmer on its side, remove the two screws from the access covers at the front and rear of the unit, and remove the covers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI