Delta 51599 Specification

Type
Specification

This manual is also suitable for

Submitted Model No.:
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-B-51599 Rev. D
Specic Features:
24 5/8"
(625.5 mm)
6 1/2"
(165 mm)
70" (1778 mm) for 51599
60" - 82"(1524 mm-2083 mm)
for 51599-DS
Full Body
Spray
Soft Drenching
Spray
Shampoo
Rinse Spray
Fast
Massage
51599
51599-
DS
2 13/16"
(71 mm)
3 5/8"
(91 mm)
2 7/16"
(61 mm)
9 13/16"
(249 mm)
19 9/16"
(498 mm)
22 3/4"
(578 mm)
Full Spray
w/ Massage
Designate proper nish sufx
FEATURES:
• Touch-Clean
®
Nozzles
STANDARD SPECIFICATIONS
• Max flow rate 1.75 gpm @ 80 psi, 6.6 L/min @ 550 kPa
• Hand held shower with ive spray patterns -- pause is a
non-positive shut-off
• Wall bar w/adjustable slide (allows
for adjustable shower
height). Not to be used as a grab bar.
• 70" (1778 mm) Ultra Flex hose for 51599
• 60"- 82" (1524 mm-2083 mm) metal stretchable hose
w/vacuum breaker for 51599-DS
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
WALL BAR HAND
HELD SHOWER
5-Spray Setting Wall Bar Hand Shower
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1 u
• ASME A112.18.3
• EPA WaterSense
®
HAND SHOWER
DOUCHE À MAIN
REGADERA DE MANO
Your Delta Faucet hand shower incorporates a
backflow protection system that has been tested
to be in compliance with ASME A112.18.3 and
ASME A112.18.1/CSA B125.1. It incorporates
two certified check valves in series, which
operate independently and are integral,
non-serviceable parts of the wand assembly.
u
  • Page 1 1

Delta 51599 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI