DataVideo RP-64 User manual

Brand: DataVideo

Model: RP-64

Category: Video switches

Type: User manual

DataVideo RP-64 is a rack-mountable rear panel patch with a detachable standard 1U rack design for easy installation. It features a single HD/SD-SDI input and eight CVBS outputs, allowing you to convert and distribute HD-SDI video signals to multiple CVBS devices. The RP-64 supports various input and output resolutions, including 1080p, 1080i, and 720p for HD-SDI, and 625/25 PAL and 525/29.97 NTSC for CVBS output. With its DC 12V input and compact dimensions, the RP-64 is a versatile solution for integrating CVBS devices into your HD-SDI video workflow.

Table of Contents

TABLE OF CONTENTS ...................................................................................... 1

WARRANTY ......................................................................................................... 2

STANDARD WARRANTY ................................................................................................... 2

TWO YEAR WARRANTY ................................................................................................... 2

DISPOSAL ........................................................................................................... 2

PACKING LIST .................................................................................................... 3

INTRODUCTION ................................................................................................. 3

FEATURES .......................................................................................................... 3

REAR PANEL ...................................................................................................... 3

SYSTEM DIAGRAM ............................................................................................ 4

DIMENSION ......................................................................................................... 5

SPECIFICATION.................................................................................................. 5

SERVICE & SUPPORT ....................................................................................... 7

Warranty

Standard Warranty

 Datavideo equipment is guaranteed against any manufacturing defects for one year from

the date of purchase.

 The original purchase invoice or other documentary evidence should be supplied at the

time of any request for repair under warranty.

 Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered

by this warranty.

 All mail or transportation costs including insurance are at the expense of the owner.

 All other claims of any nature are not covered.

 Cables & batteries are not covered under warranty.

 Warranty only valid within the country or region of purchase.

 Your statutory rights are not affected.

Two Year Warranty

 All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year

extension to the standard Warranty, providing the product is registered with Datavideo

within 30 days of purchase. For information on how to register please visit

www.datavideo.com or contact your local Datavideo office or authorized Distributors

 Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard

Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first).

Any second year warranty claims must be made to your local Datavideo office or one of its

authorized Distributors before the extended warranty expires.

Disposal

For EU Customers only - WEEE Marking.

This symbol on the product indicates that it will not be treated as household waste. It

must be handed over to the applicable take-back scheme for the recycling of Waste Electrical

and Electronic Equipment. For more detailed information about the recycling of this product,

please contact your local Datavideo office.

Packing List

RP-64 Unit

Quick Start Guide

Introduction

The RP-64 is a rack-mount rear panel patch that can be installed into the OBV-2800 OB VAN Studio

System to provide up to 8 CVBS output terminals. The objective of this product is to replace the RP-

45A on the OBV-2800.

The RP-64 includes a DAC-50S HD-SDI-to-Analog Converter that converts an HD-SDI video signal to

a CVBS video signal, acting as a video buffer on the OBV-2800. The extension mechanism inside the

RP-64 expands the single CVBS output into 8 CVBS output terminals.

Features

 Detachable standard 1U rack design for easy installation

 DC 12V input

 HD-SDI Video Input: BNC x1

 Video Output: CVBS Out component x8

 HD/SD-SDI Input Resolutions:

 1080p 50/59.94 Hz

 1080i 50/59.94 Hz

 720p 50/59.94 Hz

 CVBS Output Resolutions:

 625/25 PAL

 525/29.97 NTSC

Rear Panel

CVBS Out component x 8

System Diagram

HDMI OUT

Multiview Out

SDI IN

PGM

Backup Recording (Reserved)

SDI IN

HDMI IN 1

HDMI OUT

RP-64 Video Buffer and HD-SDI to Analog

Converter Rear Panel

MS-2800

Full Link Map

VSM-100

HDMI IN 1

HDMI IN 2

PGM

SE-2800

4.3” SDI IN 1

VS-150 HDMI OUT

HDMI IN 2

SDI OUT

4.3” SDI PASS OUT 1

VS-150 SDI IN

VS-150 SDI OUT

4.3” SDI IN 2

RP-62 (Incl. VP-445)

22~23

To ITC-100

24~31

ITC-100 Intercom

Tally 1~8

DAC-50S HD-SDI-to-Analog Converter

System Diagram

Dimension

Specification

Input Interface

1x HD/SD-SDI input

Output Interface

8 x CVBS

Operating Temperature

0°C to 40°C (32°F to 102°F)

Humidity

10% to 90% (non condensing)

Dimension

Please refer to the Dimension Section

Weight

2 Kg

Notes

Service & Support

DataVideo RP-64 User manual

Brand: DataVideo

Model: RP-64

Category: Video switches

Type: User manual

Download PDF

report

DataVideo RP-64 User manual

DataVideo RP-64 User manual

Related papers