Belt Cover Kit, AWD Recycler Lawn Mower

Toro Belt Cover Kit, AWD Recycler Lawn Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Belt Cover Kit, AWD Recycler Lawn Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What safety precautions should I take when working on the blade?
    How do I remove the blade?
    How do I remove the rear baffle?
    How do I remove the lower, rear belt cover?
    What should I do with the metal belt guide?
    How do I install the upper, front belt cover?
    How do I install the blade drive and belts?
    How do I install the lower, front belt cover?
    How do I reinstall the rear baffle?
    How do I install the lower, rear belt cover?
    How do I install the blade?
FormNo.3414-400RevB
BeltCoverKit
AWDRecycler
®
LawnMower
ModelNo.136-9124
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Upperbeltcover1
Lowerbeltcover1
Bolt(1/4x1.33inches)
2
Engine-mountbolt(3/8x1inch)
2
Installthekit.
WARNING
Thebladeissharp;contactingthebladecan
resultinseriouspersonalinjury.
Weargloveswhenservicingtheblade.
PreparingtheMachine
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthespark-plugwirefromthespark
plugandremovetheelectric-startbutton(if
present).
3.Tipthemachineontoitssidewiththeairlterup.
4.Useablockofwoodtoholdthebladesteady
(Figure1).
5.Removetheblade,savingallmountinghardware
(Figure1).
g206911
Figure1
6.Loosenthe5boltsthatholdtherearbafein
place.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3414-400*B
g212126
Figure2
1.Rearbafe
7.Removeandretainthelower,rearbeltcover
andcorrespondingbolts(Figure3).
g212208
Figure3
1.Lower,rearbelt-cover
bolts(retain)
2.Lower,rearbeltcover
(retain)
8.Removebothbeltsfromthebladedriveandthen
removeandretainthebladedrive(Figure4).
g211698
Figure4
1.Belts(retain)2.Bladedrive(retain)
9.Removeanddiscardthemetalbeltguideand2
correspondingbolts(Figure5).
g212112
Figure5
1.Metalbeltguide(discard)2.Belt-guidebolts(discard)
10.Removeanddiscardthefrontbeltcover;retain
thecorrespondingbolts(Figure6).
2
g212113
Figure6
Model20353shown;appearanceofmachinevaries
1.Frontbeltcover(discard)
2.Frontbelt-coverbolts
(retain)
11.Ifneeded,centerpunchandthendrill2holes
(9/32inch)throughthedeckforinstallationof
thebeltcovers.
Note:Usethetemplateatthebackofthese
instructionsfortheappropriateholeorientation.
InstallingtheKit
1.Installthe2engine-mountbolts(3/8x1inch)
andtorquethemto400in-lb(Figure7).
g212119
Figure7
1.Engine-mountbolts
2.Installtheupper,frontbeltcoverprovidedinthis
kitwiththeboltspreviouslyremoved.
3
g212120
Figure8
1.Upper,frontbeltcover2.Upper,frontbelt-cover
bolts
3.Installthebladedriveandroutebothbelts
arounditasshowninFigure8.
Note:Thebladespacerneedtoremaininside
ofthebladedrive.
g211698
Figure9
1.Belts2.Bladedrive
4.Installthelower,frontbeltcoverbythreading2
bolts(1/4x1.33inches)throughthelowerbelt
cover,throughtheholesdrilled(ifapplicable),
andintotheupperbeltcover.
g212121
Figure10
1.Lower,frontbeltcover2.Lower,frontbelt-cover
bolts
5.Tightenthe5boltsthatholdtherearbafein
place(Figure10).
4
g212127
Figure11
1.Rearbafe
6.Installthelower,rearbeltcoverwiththe
correspondingboltsthatyoupreviously
removed.Insertthebackofthecoverintothe
reardischargechuteandthenlowerthefrontin
place(Figure12).
Note:Ensurethattherearbeltdoesnotget
pinchedbetweenthesidewallandboltswhen
installingthelower,rearbeltcover.
g212123
Figure12
1.Lower,rearbelt-cover
bolts
2.Lower,rearbeltcover
5
InstallingtheBlade
Important:Youwillneedatorquewrenchto
installthebladeproperly.Ifyoudonothavea
torquewrenchorareuncomfortableperforming
thisprocedure,contactanAuthorizedService
Dealer.
1.Installthenewbladeandallmountinghardware
(Figure13).
g024443
Figure13
Important:Positionthecurvedendsofthe
bladetopointtowardthemachinehousing.
2.Useatorquewrenchtotightenthebladeboltto
82N∙m(60ft-lb).
Important:Abolttorquedto82N∙m(60
ft-lb)isverytight.Whileholdingtheblade
withablockofwood,putyourweight
behindtheratchetorwrenchandtightenthe
boltsecurely.Thisboltisverydifcultto
overtighten.
6
Template
Important:Ifyouareprintingthisfromwww.Toro.com,ensurethatitisprintedat100%scaleandthat
thedistancefromAtoBis1inch:.
g206972
1.3.1mm(0.12inch)3.1.5mm(0.06inch)5.79mm(3.11inches)
2.4.8mm(0.19inch)4.7.1mm(0.28inch)diameter6.2.3mm(0.09inch)
7
/