Broadcom HSCH-53xx Equivalent Circuit Model User guide

  • Hello! I am an AI chatbot trained to assist you with the Broadcom HSCH-53xx Equivalent Circuit Model User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HSCH-53xx
HSCH-53xx Equivalent Circuit Models
HSCH-5314
Parameter units 1.0 mA 1.5 mA 3.0 mA 20uA 50uA 150uA
self bias self bias self bias DC bias DC bias DC bias
Rs ohm 5.0 5.2 5.0 2.8 4.7 2.7
Rj ohm 393 232 150 1240 618 211
Cj pF 0.11 0.11 0.12 0.11 0.12 0.13
HSCH-5340
Parameter
units 1.0 mA 20uA 50uA 150uA
self bias DC bias DC bias DC bias
Rs ohm 11 11 11 11
Rj ohm 267 1400 560 187
Cj pF 0.11 0.09 0.09 0.1
This library of models is being supplied to users as an aid to circuit designs. While it reflects reasonably close similarity to
the actual devices in terms of performance, it is not suggested as a replacement for lab evaluation. Simulation should be
used as a forerunner or a supplement to traditional lab testing.
Users should very carefully note the following factors regarding these models:
Model performance in general will reflect typical baseline specs for a given device, and certain aspects of
performance may not be modeled fully.
While reasonable care has been taken in their preparation, we cannot be responsible for correct application on any
and all computer systems.
For future model improvements, Agilent Technologies reserves the right to change these models without prior
notice.
For actual design guidelines, please refer to current data sheet for the device. Only the data sheet provides actual
performance guarantee.
/