2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Symmons
  6. 433RH

Symmons 433RH, 433RH-STN, 433TB-18, 433TB-18-STN, 433TB-24, 433TB-24-STN, 433TP, 433TP-STN, 433TR, 433TR-STN Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Symmons 433RH Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
433RH, 433TB-18, 433TB-24, 433TP, 433TR
Sereno
™
Accessories
Operation & Maintenance Manual
Model Numbers Specifications
433RH Robe Hook
433TB-18 18" Towel Bar
433TB-24 24" Towel Bar
433TP Toilet Paper Holder
433TR Towel Ring
All premium accessories made from brass plated in
standard polished chrome nish.
Modifications Warranty
-STN Satin nickel finish
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3093 REV 0 09/22/14
2
Dimensions
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3093 REV 0 09/22/14
Measurements
A 2 3/8", 60 mm
B 2 5/8", 67 mm
C 2 5/8", 67 mm
D 8 1/4", 210 mm
E 5 5/8", 143 mm
F 2 5/8", 67 mm
G 7", 178 mm
H 3 1/8", 79 mm
I 4 1/8", 105 mm
J 20", 508 mm
K 22 3/4", 578 mm
L 2 5/8", 67 mm
M 2 5/8", 67 mm
N 26", 660 mm
O 28 3/4", 730 mm
Required for Installation
Phillips head
screwdriver
Power drill
Note: Dimensions are subject to change without notice.
AA
B
B
LL
L
L
HH
J
J
K
K
N
N
O
O
G
G
D
D
E
E
F
F
M
M
M
M
CC
I
I
433RH
433TB-18
433TB-24
433TP
433TR
3
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3093 REV 0 09/22/14
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 433TB-18 and 433TB-24 only.
Make sure both centerline
marks are
level.
2a)
Dry Wall Option:
Place mounting
brackets into desired position.
Using brackets as a guide, mark
holes. Screw self-drilling anchors
into wall.
2b) Stud Option:
Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes into
wall.
3) With mounting brackets in
position, secure to wall using
screws.
4) Hang top of accessory on
mounting bracket. Lower into
position.
5) Secure with set screw.
1
2
1
2
1
4
3
4
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
1
2
/