10056091
8-17-2017 5:52 PM Steve Iacona / Steve IaconaSaved at Nonefrom iMac-17-1a by Printed At
Approvals
Client
Built At
Output At
Scale
Bleed
Trim
Viewing
Live
Vendor
Contact
Scotts
100%
100%
1” = 1”
8” h x 31.625” w 7.75” h x 31.375” w
7.75” h x 31.375” w 7.75” h x 31.375” w
None
Job info
8x8 4PANEL 8 PGfold_ OUTSIDE
Notes/Special Instructions
Art Director
Copy Editor
PM
None
None
None
Fonts
Hellix (Regular, Heavy), Minion Pro (Regular)
Inks
Cyan, Magenta, Yellow, Black,
PMS 3288 C, PMS Cool Gray 7 C,
PMS 7468 C, PMS 356 C
Images
Sprayer_Kit_Pieces_20170715_r1.ai (50%,
-50%), 20170720_Ecosystem_Illustra-
tion_3288_r1.ai (65.27%), Sprayer_Kit_Piec-
es_20170715_GREY_r1.ai (25%, -25%),
Sprinkler_Kit_Pieces_20170724_COL-
OR_3288_r1.ai (50%), Sprinkler_Base_
Sideview new base.ai (50%), Sprinkler_
Base_Sideview1__3288_r1.ai (50%, 44.78%),
Sprinkler_Kit_Pieces_20170724_GRAY_r1.ai
(25%, 28%, 25%, 30%)
Fonts & Images
© 2017 The Scotts Company LLC.
World rights reserved. MS3071
Welcome to Gro
™
.
The Gro
™
ecosystem is a new way for you to manage
all things that grow. Gro
™
smart devices replace
guesswork with data by using sensors, controllers,
and pulling weather analytics. Gro
™
also o ers you
more ways to save time and reduce waste with
precision watering kits and nutrient delivery systems.
All this is pulled together in a family of beautifully
simple apps allowing you to control from anywhere.
Gro
™
. Bringing you more joy, fewer chores.
Want to add on to your kit?
Or access helpful videos and FAQs?
Go to mygro.com/sprinkler
Have additional questions?
Call: 1-855-377-7292
Email: mygro[email protected]
Step 3
Install Garden Sprinkler
Using your scissors, cut the tubing
where you intend to place your
Garden Sprinkler.
Option A If you do not need to put
your Garden Sprinkler on the Riser,
simply attach one side of Garden
Sprinkler base to Tubing, twist to
attach Sprinkler head to base, push
to install End Plug on other side
of Sprinkler, and install Pipe Guides
to secure it. Set your coverage area
for your desired needs.
Option B To help water taller plants,
install the Garden Sprinkler Riser by
installing between sprinkler head
and sprinkler base.
Tips: Your Garden Sprinkler can
be secured to a solid surface, (for
example a wooden slab) using the
screw holes on the base of the
Sprinkler.
When connecting the Garden
Sprinkler Head to the base, make
sure that the small white filter is
installed in the Sprinkler Head.
Components needed
Bag 3
Loose in
the pack
Step 4
Add Quick Connect to
Your Accessories
Spigot
Quick Connect
Spigot Adapter
Quick Connect
Accessory Adapter
Quick Connect
Accessory Adapter
Lawn Sprinkler
(Not Included)
Quick Connect
Male Hose
Connector
Pistol Spray Nozzle
(Not Included)
Quick Connect
Female Hose
Connector
Your Existing
Garden Hose
If you didn’t already add Quick
Connect to your garden hose in
Step 1, add it now using the Quick
Connect Male and Female Hose
Connectors. You will now be able to
attach or detach your hose from
your spigot with just a click!
For even more Accessory, use the
included Quick Connect Accessory
Adapter to switch between
accessories with a single click.
The examples on this page show
how to attach the Quick Connect
Accessory Adapter to a pistol spray
nozzle and a lawn sprinkler.
Tip: The Quick Connect Female
Hose Connector features
Water Stop technology, which
automatically stops the flow
of water when an accessory is
disconnected—saving you a trip to
the spigot—and restarts it when
an accessory is reconnected.
Components needed
Bag 1
Bag 4
Tubing
Pipe Guide
Tubing
Width Adjustment
Water Flow
Adjustment
Riser For
Garden Sprinkler
Secure with
Pipe Guide
Range
Adjustment
Tubing
End Plug
Option B
Tubing
End Plug
Garden Sprinkler Kit
Instructions for Use
Care and Maintenance
To maintain system serviceability winterization is
recommended. Disconnect from the spigot, remove
hose connectors, and protect from frost and freezing
conditions.
Option A
T:31.375”
T:7.75”
B:31.625”
B:8”
F:7.75”
FS:7.625”
F:7.875”
FS:7.625”
F:7.875”
FS:7.625”
F:7.875”
1005609_T51151_Gro Garden Sprinkler Kit Quick Start Guide_OUTSIDE rev_8.16_r1.indd 1 8/17/17 5:55 PM
10056091
8-17-2017 6:23 PM Steve Iacona / Steve IaconaSaved at Nonefrom iMac-17-1a by Printed At
Approvals
Client
Built At
Output At
Scale
Bleed
Trim
Viewing
Live
Vendor
Contact
Scotts
100%
100%
1” = 1”
8” h x 31.625” w 7.75” h x 31.375” w
7.75” h x 31.375” w 7.75” h x 31.375” w
None
Job info
8x8 4PANEL 8 PGfold_INSIDE
Notes/Special Instructions
Art Director
Copy Editor
PM
None
None
None
Fonts
Hellix (Regular, Heavy)
Inks
Cyan, Magenta, Yellow, Black,
PMS 3288 C, PMS Cool Gray 7 C
Images
Sprinkler_Setup_Page1_3288_r1.ai (60%,
70%), Sprinkler_Kit_Pieces_20170724_COL-
OR_3288_r1.ai (50%, -50%, 50%, -50%),
Sprayer_Kit_Pieces_20170715_3288_r1.ai
(50%, 50%, -50%), Sprinkler_Base_
Sideview_3288.ai (50%), Sprayer_Kit_Piec-
es_20170715_GREY_r1.ai (25%, 25%),
Sprinkler_Kit_Pieces_20170724_GRAY_r1.ai
(25%)
Fonts & Images
Go to www.mygro.com/sprinkler
Lay out Tubing—put it in the
sun for a few minutes to help
soften it up.
Identify the spigot, timer, or
hose you want to connect to.
Gather additional tools: scissors.
Plan Your Setup
Watch Quick Start Video
Component List
In the Pack
Loose in
the pack
Garden Sprinkler Head x 1 Garden Sprinkler Base x 1
End Plug x 1
Water Flow Reducer
& Filter x 1
Tubing x 50 ft
(15 m)
90-Degree
Elbow-Joint × 3
Tubing Pipe Guide x 3
Riser For Garden Sprinkler x 1
Tubing Pipe Guide x 2
Quick Connect
Accessory Adapter × 2
5 ft Quick Connect Leader Hose x 1
( 1.5 m)
Bag 1
Bag 2
Bag 3
Bag 4
Quick Connect
Spigot Adapter × 1
Quick Connect
Male Hose Connector × 1
Quick Connect
Female Hose Connector × 1
Step 1
Connect to Water Source
Connect your Garden Sprinkler Kit
to a water source using this
diagram as a guide.
Option A If you are planning
to use a timer to control your
system, attach it first to your
spigot or hose, and then attach
the Quick Connect Spigot
Adapter to your timer.
Option B If you plan to use your
existing hose, attach the Quick
Connect Male and Female Hose
Connectors to either end and
attach it to the spigot.
Quick Connect
Spigot Adapter
Quick Connect
Male Hose
Connector
Timer
(Not Included)
Spigot
Quick Connect
Female Hose
Connector
Simply pull back
the coupling to
slide on Tubing.
Water Flow
Reducer & Filter
Tubing
5ft Quick Connect
Leader Hose
Your Existing
Garden Hose
Components needed
Bag 1
Loose in
the pack
Option A
Option B
Step 2
Lay Out and Stake Tubing
Keeping in mind where you will need to
place the Garden Sprinkler to reach your
plants, begin laying out the Tubing.
Add 90-Degree Elbow Joints to go
around corners as needed.
Lay out your Tubing using the
included Elbows and Pipe Guides. You
can reference the example arrangement
on this page to see how the various
components can be used to build your
system.
Tip: Lay your Tubing out in the sun for
a few minutes to soften it up before
assembling.
Tubing
To Water
Source
90-Degree
Elbow Joint
Components needed
Bag 2
Loose in
the pack
Sprinkler Head
Oscillate
Adjustable spray
width from
2 up to 20 ft.
Total coverage area from
10 ft up to 950 ft
Adjustable spray
length from
4 up to 40 ft.
T:31.375”
T:7.75”
B:31.625”
B:8”
F:7.875”
FS:7.75”
F:7.875”
FS:7.625”
F:7.875”
FS:7.625”
F:7.75”
1005609_T51151_Gro Garden Sprinkler Kit Quick Start Guide_INSIDE rev_8.16_R1.indd 1 8/17/17 6:23 PM
/
