Ledalite VersaForm Install Instructions

VersaForm
Ledalite
Brand
Ledalite
Model
VersaForm
Type
Install Instructions

This manual is also suitable for

Ledalite VersaForm is a versatile and efficient lighting solution that offers a range of features to meet your lighting needs. Its sleek design and customizable options make it suitable for various applications, including offices, retail spaces, and educational facilities. With its energy-saving LED technology, the VersaForm helps reduce energy consumption while providing high-quality illumination. The adjustable beam angles and multiple mounting options allow for precise light distribution and easy installation.

Ledalite VersaForm is a versatile and efficient lighting solution that offers a range of features to meet your lighting needs. Its sleek design and customizable options make it suitable for various applications, including offices, retail spaces, and educational facilities. With its energy-saving LED technology, the VersaForm helps reduce energy consumption while providing high-quality illumination. The adjustable beam angles and multiple mounting options allow for precise light distribution and easy installation.

ATTENTION: Install in accordance with national and local building and electrical codes.
!
Page 1
Recessed Junction box
1
Use installation dimensions supplied on
page 3, to mark up and drill holes in the
correct locations. Install 1/4”-20 anchors
(supplied by others) to ceiling making
sure they protrude between 7/8” to
1-1/8” and that the wire access hole is
over the junction box.
7/8” to 1-1/8” (for
recessed junction boxes)
Arrange boxed fixtures on the floor in specified
mounting locations. Remove fixtures and any hard-
ware from boxes. Remove cardboard spacers.
Remove spacers
2
Indicating hole
3
Locate indicating holes on lens door frame.
These markers are opposite to the doors
hinging mechanism.
Pull the lens door frame upward on the
indicating marker side. Disconnect wire harness
and remove doorframe.
Note: After removing lens door
frame place it in an area free from
debris to avoid scratching
Remove fixture from box
Find indicating holes Remove lens door frame
4
5
Install preparation
Place housing on ladder or platform
under install location
Attach housing to anchors using 1/4’-20 hex
nut and washer (supplied by others)
Note: It is Recommended to use two people
6
Install housing
7
Remove wire cover from housing. Make all
necessary power connections and reinstall
wire cover.
Electrical connections
8
Install lens door frame
Connect and re-install lens door frame. Align
door frame so that it sits flush with the
bottom of the housing.
Wire cover
ATTENTION: Install in accordance with national and local building and electrical codes.
!
Page 2
1
Surface conduit connecon
Remove wire cover. Push in knockout on the
side of housing for conduit entry.
7
Remove wire cover
Follow steps 1-6 on page 1.
On the conduit entry side of wire cover break off tab
to allow conduit to enter driver channel
Complete electrical connections and re-
install wire cover
Knockout
Break off tab
10
Install lens door frame
Connect and re-install lens door frame. Align
door frame so that it sits flush with the
bottom of the housing.
8
9
Power connection
Adjust wire cover
ATTENTION: Install in accordance with national and local building and electrical codes.
!
Page 3
1’x4’
4 mounting locations
2’x4’
6 mounting locations
2’x2’
4 mounting locations
CONDUIT ENTRY
CONDUIT ENTRY
CONDUIT ENTRY
Wire access hole
Wire access hole
Wire access hole
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ledalite VersaForm Install Instructions

VersaForm
Ledalite
Brand
Ledalite
Model
VersaForm
Type
Install Instructions
This manual is also suitable for

Ledalite VersaForm is a versatile and efficient lighting solution that offers a range of features to meet your lighting needs. Its sleek design and customizable options make it suitable for various applications, including offices, retail spaces, and educational facilities. With its energy-saving LED technology, the VersaForm helps reduce energy consumption while providing high-quality illumination. The adjustable beam angles and multiple mounting options allow for precise light distribution and easy installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents