3. OPERATION
Press Power buon to power on the unit. The green LED blinks and unit
starts inializaon. When the LED stops blinking and keeps lighng, the
unit is ready for operaon.
When the unit detects metal object, the green LED goes out, but the red
LED lights. And unit starts vibrang.
Repress the Power Buon to turn off the detector.
Note:
(1) The unit will suspend the operaon aer connuous detecon
above same target for about 15 seconds in order to save baery
power. At this me the green LED keeps light. It will recover the
detecon for new targ
et aer about 1 second.
(2) When the unit is in inializaon, hold it stable and keep away from
any metal object.
(3) When the red LED blinks, change the baery.
4. CARE AND MAINTENANCE
(1) Handle the detector gently and carefully. Dropping it can damage
circuit boards and cases and can cause the detector to work
improperly.
(2) If you don’t plan to use the unit for a week or more, remove the
baery. Baery can leak chemicals that can destroy electronic parts.
Note:
The pinpointer is waterproof and can work in the rain. But it is not
available in heavy rain, neithe
r in deep water.
WARRANTY
AAVIX product carries a limited one (1) year warranty against defects in
workmanship and materials from date of purchase under normal
household use. If product is to be used for commercial, industrial or
rental use, a 30 days limited warranty will apply. Warranty does not
apply to defects due to direct or indirect abuse, negligence, misuse,