Goose-neck Bracket Mounting Kit
DB60
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the
packing slip. In addition to this manual and a DB60 goose-neck mounting
bracket, the dome camera packing box includes:
A. Plastic Anchor x4
B. Round Head Screw (Tapping Type)
C. Rubber Gasket x1 (Use as a wall-mount template)
i3-TRNG-CAMS-DB60-QSG.indd
Rev. 171117
Scan this QR code or visit ftp.i3international.com to view and
download Quick Guides and Manuals for i3 products. Please
contact our Technical Support team if you require services or
support. Technical support can be reached at:
[email protected] and toll-free at
1.877.877.7241.
A
Quick Start Guide
• It is the installer’s responsibility to ensure that the mounting surface is suitable
for the chosen installation method.
• Based on the installation location and surface type, supplied screws and
anchors may not be adequate.
• Mounting hardware is site-specific and may need to be supplied by the
installer.
• Rubber gasket provides a water-tight seal between surfaces and keeps
moisture and insects out of the gooseneck.
• Use the provided rubber gasket as a mounting template to mark hole locations
prior to drilling.
• In all outdoor installations, use silicone on 3/4” NPS thread, on screw holes and
around the entire perimeter of the installation plate to maintain waterproof seal.
COMPATIBLE WITH
• All i3 camera back boxes
• DB60CPM - Corner/Pole Mount Bracket
170 mm (6-11/16”)
117 mm (4-5/8”)
83 mm (3-1/4”)
47.5 mm (1-7/8”)
4 mm (3/16”)
73 mm (2-7/8”)
3/4” NPS Thread
O-ring
B C
INSTALLATION
DIMENSIONS
DB60 is the goose-neck wall mounting bracket. It is designed for direct surface
mount, or standard single gang outdoor electrical box installations (e.g. Red Dot
S100WHCN). DB60 can be combined with the optional DB60CPM bracket for
corner- or pole-mount installations.
DB60 is compatible with all i3-series camera back boxes for easy installation.
MOUNTING OPTIONS
WALL MOUNT
Rubber Gasket, install with
at side to the surface
DB60 Bracket
Round Head
Screws
(provided)
Plastic
Anchors
(included)
ELECTRICAL BOX MOUNT
DB60 Bracket
Machine-type screws (not included),
as required for the electrical box
Outdoor Electrical Box
(third party, not included)
Rubber Gasket, install with
at side to the surface
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
Canada 780 Birchmount Road, Unit 16,
Scarborough, ON, M1K 5H4
U.S.A. 4450 Witmer Industrial Estates Unit 4
Niagara Falls, NY 14305
/