Cen-Tec 91255 User manual

# 91255 Key Backpack Accessory Kit

The 91255 is comprised of a two piece button lock S-wand with ABS compression coupling. Assemble wand

by aligning the button on the lower wand with the corresponding hole on the upper wand resulting in an

S-shaped conguration to the nal assembly. Release the threaded collar on the compression coupling

and insert the desired tool. Tighten the threaded collar to lock the tool to the wand. By fully tightening the

nut you can lock the tool rmly in place. Releasing some of the collar tension will allow the tool to rotate.

Replace the tool by loosening the threaded collar until the tool pulls away from the wand and replace with

another tool using the same technique.

For further questions regarding this product and it’s intended uses please contact Cen-Tec Systems by

email: help@centecsystems.com or call 1-800-833-2822 between the hours of 8:00am and 5:00pm Monday

through Friday CST