Eurotech A3pci0104 Owner's manual

Brand: Eurotech

Model: A3pci0104

Type: Owner's manual

PMC Carrier Board

Manual

Preface

Thank for choosing the A3pci0104. Please read this manual before using the A3pci0104 so that you may obtain the

greatest benefit from using the device.

This manual presents the specifications, functions, and method of use of the PMC Carrier Board A3pci0104.

Advanet Inc. has made every effort to carefully inspect each product and has taken great care to package and to ship

the product. In the unlikely event of the product’s failure to operate normally due to problems in shipping or other-

wise, the company will repair or replace the product at its own responsibility.

Contact Advanet at the following address if you have any questions.

Inquiries

Sales Division

Headquarters

616-4 Tanaka, Okayama 700-0951 Japan

TEL : 086-245-2861 FAX : 086-245-2860

Tokyo Office KDX Kaji-cho 4F , 3-5-2 Kanda Kaji-cho,

Chiyoda-ku, Tokyo 101-0045 Japan

TEL : 03-5294-1731 FAX : 03-5294-1734

INTERNETURL http://www.advanet.co.jp/

1. In order to improve the product, the contents of this document as well as product specifications are subject to change without notice.

2. This document does not give permission to the implementation of patents or other rights held by Advanet or third parties.

3. Reproduction of all or part of this document without Advanet’s permission is prohibited.

2008 Advanet Inc.

〒

Precautions in Use

Please read this manual before using the product in order to insure its safe use.

Do not place the product in a

location where it can fall or be

subject to vibration or impact

because this may cause device

failure.

Protect the device from vibration and impact.

Do not modify the device.

For safety reasons, under no

circumstances should you

modify the device. Advanet will

not repair products that have

been modified.

Protect the product from water

and chemicals.

Contact between the product

and water or chemicals can

result in product failure,

electrocution, or fire.

Protect the product from

foreign material.

Make sure that foreign

material does not get into the

product during use, storage, or

transport because this can

result in product failure.

Take precautions in handling to insure

that you are not injured.

The sharp projections on this

product may cause injury. Take

care in handling this product in

order to avoid injury.

Do not disassemble the product.

In order to maintain

guaranteed product

performance, do not under any

circumstances disassemble

this product.

Keep the product away from radios and TVs.

Do not use the product near

radios, television sets, or other

devices generating strong

magnetic or electrical fields.

This could result in failure or

malfunction.

Keep the product away from

flame, humidity, and direct sunlight.

Do not use or store the product

in any of the following locations

as this could result in product

failure.

Places where there is fire.

Locations high in humidity

or exposed to rain

Locations exposed to direct

sunlight

Dusty or dirty locations

Locations containing

excessive water or

chemical vapors

Precautions in use

Please read this manual before using the product in order to insure its safe use.

Install the product in well-ventilated locations.

Install the product in well-

ventilated locations to

efficiently disperse heat

generated by the product.

Remove the power plug from the receptacle

when not using the product.

Turn off the main switch and

remove the power plug from

the receptacle when not using

the product, or there is the risk

of lightning strike.

Be sure to use the device within rated parameters.

Be sure to use the product

within the ratings specified in

this manual. Failure to do so

may result in malfunction.

Cleaning the product

If the product becomes dirty,

wipe it with a dry soft cloth. A

thinned neutral cleaner may be

used if the product is

particularly dirty. Do not use

benzene, thinners, or other

solvents under any

circumstances.

Be sure to ground the product in order

to prevent electrocution.

Be sure to ground the product

by connecting it to a 3-pole AC

receptacle or by using an AC

receptacle having a grounding

terminal.

Be sure to dispose of the product properly.

Use appropriate methods for

handling industrial wastes

when disposing of this product.

Please contact Advanet for repair of the product.

Please contact your retail

dealer or Advanet when repairs

are necessary.

Make sure that the product is not miswired.

Failure to wire the product

correctly can result in

malfunction or fire. Read this

manual and wire the product

correctly.

Static electricity may cause malfunction.

This product comprises

electronic parts that are highly

susceptible to static electricity.

Static electricity can cause the

product to malfunction. Take

care not to touch any of the

terminals, connectors, ICs, or

other parts with the hands.

When you believe the product to be malfunctioning

Stop using the product if you

believe it is malfunctioning.

Continuing to use a

malfunctioning product can

cause the malfunction to

spread to other products and

can cause short circuits or fire.

Content

1. Prior to use ............................................................................................................................................................................... 6

1.1 Period and scope of warranty ........................................................................................................................................... 6

1.2 Scope of service ................................................................................................................................................................ 6

2. Outline ...................................................................................................................................................................................... 7

3. Specification ............................................................................................................................................................................ 8

3.1 Bus Interface ...................................................................................................................................................................... 8

3.2 Power Supply ..................................................................................................................................................................... 8

3.3 Mechanical Specification .................................................................................................................................................. 8

3.4 Environmental specification .............................................................................................................................................. 8

4. Block Diagram ......................................................................................................................................................................... 9

5. External Dimensions ...............................................................................................................................................................10

6. Connection .............................................................................................................................................................................. 11

1. Prior to use

1.1 Period and scope of warranty

Delivered products are under warranty for a period of one year after delivery.

During the period of warranty, the vendor will have his own to responsibility replace or repair malfunctioning

parts if the product malfunction is the responsibility of the vendor.

However, this warranty does not apply under the following circumstances:

(1) If the user handles or uses the product in an inappropriate way

(2) If the malfunction is caused by something other than the delivered product

(3) If the delivered product has been modified or repaired by anyone other than the vendor

(4) Due to natural disaster, accident, or other reason not the responsibility of the vendor

In this context, the term “warranty” means solely a warranty of the individual delivered product, and does not

include any compensation for the damage caused by malfunction of the delivered product.

1.2 Scope of service

The service costs such as the costs of sending technical personnel are not included in the price of the delivered

product. Customers will be charged for the following costs:

(1) Assistance with installation adjustments and test running

(2) Maintenance inspections, adjustments, and repairs

(3) Technical assistance and technical training

2. Outline

The A3pci0104 is a 3U single-size CompactPCI board that allows the PCI mezzanine card (PMC) signal to be con-

verted to the CompactPCI signal.

3. Specification

3.1 Bus Interface

Bus rating PCI Local Bus Specification Revision 2.2

PICMG 2.0 R3.0 CompactPCI Specification

IEEE P1386, P1386.1

Signaling Level 5VTTL

Address width 32bit

Data width 32bit

Clock frequency Under 33.33MHz

3.2 Power Supply

Supply Voltage DC5.0V ±5% (supplied from backplane)

DC3.3V ±5% (supplied from backplane)

DC ±12.0V ±5% (supplied from backplane)

3.3 Mechanical Specification

Dimensions 3U,CompactPCI bus, 1slot width

External Dimensions 160mm × 100mm × 1.6mm

Weight 114g

3.4 Environmental specification

Operating Temperature Range 0 to 60°C

Operating Humidity Range 35% to 85%RH (non-condensing)

Storage Temperature Range -10 to 70°C

Storage Humidity Range Under 90%RH (non-condensing)

4. Block Diagram

Figure 4 shows a block diagram of the A3pci0104.

[Figure 4] A3pci0104 Block Diagram

CPCI

Interface

PMC

Interface

PMC

CPCI

A3pci0104

5. External Dimensions

Figure 5 shows a External Dimensions of the A3pci0104.

[Figure 5] External Dimensions

20.02 38

177.34

100

160

130

6. Connection

Table 6.1 shows CompactPCI connector pin assignment, and Table 6.2 shows PMC connector pin assignment. The

same signals shown in the tables are connected between the CompactPCI connector and PMC connector.

(G) .......... Connected to GND

(V) .......... Connected to 5V power supply

(NC) ....... No Connect

(*) ........... Connected between the CompactPCI connector and PMC connector via 10Ω resistance

[Table 6.1] CompactPCI Connector Pin Assignment

Pin A B C D E F

25 5V REQ64# (*) ENUM# (NC) 3.3V 5V GND

24 AD1 (*) 5V V(I/O) AD0 (*) ACK64# (*) GND

23 3.3V AD4 (*) AD3 (*) 5V AD2 (*) GND

22 AD7 (*) GND 3.3V AD6 (*) AD5 (*) GND

21 3.3V AD9 (*) AD8 (*) M66EN (NC) C/BE0# (*) GND

20 AD12 (*) GND V(I/O) AD11 (*) AD10 (*) GND

19 3.3V AD15 (*) AD14 (*) GND AD13 (*) GND

18 SERR# (*) GND 3.3V PAR (*) C/BE1# (*) GND

17 3.3V SDONE (*) SBO# (*) GND PERR# (*) GND

16 DVSEL# (*) GND V(I/O) STOP# (*) LOCK# (*) GND

15 3.3V FRAME# (*) IRDY# (*) GND TRDY# (*) GND

12-14 KEY AREA

11 AD18 (*) AD17 (*) AD16 (*) GND C/BE2# (*) GND

10 AD21 (*) GND 3.3V AD20 (*) AD19 (*) GND

9 C/BE3# (*) IDSEL (*) AD23 (*) GND AD22 (*) GND

8 AD26 (*) GND V(I/O) AD25 (*) AD24 (*) GND

7 AD30 (*) AD29 (*) AD28 (*) GND AD27 (*) GND

6 REQ# GND 3.3V CLK AD31 (*) GND

5 RSV (NC) RSV (NC) RST# (*) GND GNT# GND

4 RSV (NC) GND V(I/O) INTP (NC) INTS (NC) GND

3 INTA# (*) INTB# (*) INTC# (*) 5V INTD# (*) GND

2 TCK 5V TMS TDO TDI GND

1 5V -12V TRST# +12V 5V GND

CN2 CN3

Pin Signal Name Pin Pin Signal Name Pin

63 GND REQ64# (*) 64 63 GND RSV (NC) 64

61 AD0 (*) 5V 62 61 ACK64# (*) 3.3V 62

59 AD2 (*) AD1 (*) 60 59 GND RSV (NC) 60

57 V(I/O) AD3 (*) 58 57 RSV (NC) RSV (NC) 58

55 AD4 (*) GND 56 55 RSV (NC) GND 56

53 AD6 (*) AD5 (*) 54 53 3.3V RSV (NC) 54

51 GND C/BE0# (*) 52 51 AD7 (*) RSV (NC) 52

49 AD9 (*) 5V 50 49 AD8 (*) 3.3V 50

47 AD12 (*) AD11 (*) 48 47 GND AD10 (*) 48

45 V(I/O) AD15 (*) 46 45 AD14 (*) AD13 (*) 46

43 PAR (*) GND 44 43 C/BE1# (*) GND 44

41 SDONE# (*) SBO# (*) 42 41 3.3V SERR# (*) 42

39 GND LOCK# (*) 40 39 PERR# (*) GND 40

37 DVSEL# (*) 5V 38 37 GND STOP# (*) 38

35 GND IRDY# (*) 36 35 TRDY# (*) 3.3V 36

33 FRAME# (*) GND 34 33 GND RSV (NC) 34

31 V(I/O) AD17 (*) 32 31 AD16 (*) C/BE2# (*) 32

29 AD19 (*) 5V 30 29 AD18 (*) GND 30

27 AD22 (*) AD21 (*) 28 27 3.3V AD20 (*) 28

25 GND C/BE3# (*) 26 25 IDSEL (*) AD23 (*) 26

23 AD25 (*) GND 24 23 AD24 (*) 3.3V 24

21 AD28 (*) AD27 (*) 22 21 GND AD26 (*) 22

19 V(I/O) AD31 (*) 20 19 AD30 (*) AD29 (*) 20

17 REQ# 5V 18 17 RSV (NC) GND 18

15 GND GNT# 16 15 3.3V BUSMODE4# (G) 16

13 CLK GND 14 13 RST# (*) BUSMODE3# (G) 14

11 GND RSV (NC) 12 11 BUSMODE2# (V) 3.3V 12

9 INTD# (*) RSV (NC) 10 9 RSV (NC) RSV (NC) 10

7 BUSMODE1# (NC) 5V 8 7 GND RSV (NC) 8

5 INTB# (*) INTC# (*) 6 5 TDI GND 6

3GND INTA# (*) 4 3TMS TDO 4

1 TCK -12V 2 1 +12V TRST# 2

[Table 6.2] PMC Connector Pin Assignment

Repairs

When you see indications suggesting that the device may be malfunctioning, first consult the manual to make sure that

all settings and connections are correct. If the abnormal condition is still not resolved, send the product to us by using

the following procedures:

Send the product to:

.......

Technical Support, Sales Division

616-4 Tanaka, Okayama 700-0951 Japan

TEL 086-245-2861

Include these items: ........ The malfunctioning product

Attach a completed copy of the attached Repair Request Ticket to the product.

How to send these items: ... Use parcel delivery service, and retain a copy of the mailing label.

• You will be responsible for shipping fees.

• Advanet assumes no responsibility for loss or damage occurring in shipment.

Repair costs .................... Repairs will be made free of charge within 1 year of product shipment (period of warranty).

However, you will be charged for repairs to products that have been damaged due to

customer carelessness, even during the warranty period.

• Repairs to products that do not have a serial number sticker attached may be subject to

charge, even during the warranty period, so make sure the label is attached.

Repair period .................. We will strive to complete repairs to malfunctioning devices within 10 business days

after receipt. We will contact you if circumstances require more than 20 days to com-

plete repairs.

〒

Repair Request Ticket

Return to:

Your company name:

Department:

Person in charge:

Address:

Telephone:

Contact:

Your company’s name:

Department

Person in Charge:

Name of Advanet product requiring repair:

Hardware serial number

Software version

Specific symptoms, error messages, etc.

Conditions under which the problem occurs (from the start, suddenly started one day, change in environment, etc.)

Frequency of occurrence (always, frequently, from time to time, after a certain period of time elapses)

(Extension) FAX

Other information, comments, etc.

CPU board

Manufacturer

Model number

Manufacturer

Model number

Manufacturer

Product name/version

Manufacturer

Version

Other peripheral devices

Operating system

Application program

Details of circumstances relevant to the symptom

Other items attached

(included software)

Manufacturer

Product name/version

PMC Carrier Board

Manual

First edition issued November 11, 2008

B19092A0-MN002-00

Issued:

Headquarters

616-4 Tanaka, Okayama 700-0951

TEL:086-245-2861 FAX:086-245-2860

Tokyo Office

KDX Kaji-cho 4F , 3-5-2 Kanda Kaji-cho,

Chiyoda-ku, Tokyo 101-0045

TEL:03-5294-1731 FAX:03-5294-1734

INTERNETURL http://www.advanet.co.jp/

*The product names and company names appearing in this book are trademarks or registered trademarks.

Revision History

Version Date Publication Number

First edition November 11, 2008 Issued B19092A0-MN002-00

〒

Eurotech A3pci0104 Owner's manual

Eurotech A3pci0104 Owner's manual

Eurotech A3pci0104 Owner's manual

Related papers

Other documents