Eurotech A3pci0104 Owner's manual

Type
Owner's manual
PMC Carrier Board
Manual
Preface
Thank for choosing the A3pci0104. Please read this manual before using the A3pci0104 so that you may obtain the
greatest benefit from using the device.
This manual presents the specifications, functions, and method of use of the PMC Carrier Board A3pci0104.
Advanet Inc. has made every effort to carefully inspect each product and has taken great care to package and to ship
the product. In the unlikely event of the product’s failure to operate normally due to problems in shipping or other-
wise, the company will repair or replace the product at its own responsibility.
Contact Advanet at the following address if you have any questions.
Inquiries
Sales Division
Headquarters
616-4 Tanaka, Okayama 700-0951 Japan
TEL : 086-245-2861 FAX : 086-245-2860
Tokyo Office KDX Kaji-cho 4F , 3-5-2 Kanda Kaji-cho,
Chiyoda-ku, Tokyo 101-0045 Japan
TEL : 03-5294-1731 FAX : 03-5294-1734
INTERNETURL http://www.advanet.co.jp/
1. In order to improve the product, the contents of this document as well as product specifications are subject to change without notice.
2. This document does not give permission to the implementation of patents or other rights held by Advanet or third parties.
3. Reproduction of all or part of this document without Advanets permission is prohibited.
2008 Advanet Inc.
Precautions in Use
Please read this manual before using the product in order to insure its safe use.
Do not place the product in a
location where it can fall or be
subject to vibration or impact
because this may cause device
failure.
Protect the device from vibration and impact.
Do not modify the device.
For safety reasons, under no
circumstances should you
modify the device. Advanet will
not repair products that have
been modified.
Protect the product from water
and chemicals.
Contact between the product
and water or chemicals can
result in product failure,
electrocution, or fire.
Protect the product from
foreign material.
Make sure that foreign
material does not get into the
product during use, storage, or
transport because this can
result in product failure.
Take precautions in handling to insure
that you are not injured.
The sharp projections on this
product may cause injury. Take
care in handling this product in
order to avoid injury.
Do not disassemble the product.
In order to maintain
guaranteed product
performance, do not under any
circumstances disassemble
this product.
Keep the product away from radios and TVs.
Do not use the product near
radios, television sets, or other
devices generating strong
magnetic or electrical fields.
This could result in failure or
malfunction.
Keep the product away from
flame, humidity, and direct sunlight.
Do not use or store the product
in any of the following locations
as this could result in product
failure.
Places where there is fire.
Locations high in humidity
or exposed to rain
Locations exposed to direct
sunlight
Dusty or dirty locations
Locations containing
excessive water or
chemical vapors
Precautions in use
Please read this manual before using the product in order to insure its safe use.
Install the product in well-ventilated locations.
Install the product in well-
ventilated locations to
efficiently disperse heat
generated by the product.
Remove the power plug from the receptacle
when not using the product.
Turn off the main switch and
remove the power plug from
the receptacle when not using
the product, or there is the risk
of lightning strike.
Be sure to use the device within rated parameters.
Be sure to use the product
within the ratings specified in
this manual. Failure to do so
may result in malfunction.
Cleaning the product
If the product becomes dirty,
wipe it with a dry soft cloth. A
thinned neutral cleaner may be
used if the product is
particularly dirty. Do not use
benzene, thinners, or other
solvents under any
circumstances.
Be sure to ground the product in order
to prevent electrocution.
Be sure to ground the product
by connecting it to a 3-pole AC
receptacle or by using an AC
receptacle having a grounding
terminal.
Be sure to dispose of the product properly.
Use appropriate methods for
handling industrial wastes
when disposing of this product.
Please contact Advanet for repair of the product.
Please contact your retail
dealer or Advanet when repairs
are necessary.
Make sure that the product is not miswired.
Failure to wire the product
correctly can result in
malfunction or fire. Read this
manual and wire the product
correctly.
Static electricity may cause malfunction.
This product comprises
electronic parts that are highly
susceptible to static electricity.
Static electricity can cause the
product to malfunction. Take
care not to touch any of the
terminals, connectors, ICs, or
other parts with the hands.
When you believe the product to be malfunctioning
Stop using the product if you
believe it is malfunctioning.
Continuing to use a
malfunctioning product can
cause the malfunction to
spread to other products and
can cause short circuits or fire.
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
5
Content
1. Prior to use ............................................................................................................................................................................... 6
1.1 Period and scope of warranty ........................................................................................................................................... 6
1.2 Scope of service ................................................................................................................................................................ 6
2. Outline ...................................................................................................................................................................................... 7
3. Specification ............................................................................................................................................................................ 8
3.1 Bus Interface ...................................................................................................................................................................... 8
3.2 Power Supply ..................................................................................................................................................................... 8
3.3 Mechanical Specification .................................................................................................................................................. 8
3.4 Environmental specification .............................................................................................................................................. 8
4. Block Diagram ......................................................................................................................................................................... 9
5. External Dimensions ...............................................................................................................................................................10
6. Connection .............................................................................................................................................................................. 11
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
6
1. Prior to use
1.1 Period and scope of warranty
Delivered products are under warranty for a period of one year after delivery.
During the period of warranty, the vendor will have his own to responsibility replace or repair malfunctioning
parts if the product malfunction is the responsibility of the vendor.
However, this warranty does not apply under the following circumstances:
(1) If the user handles or uses the product in an inappropriate way
(2) If the malfunction is caused by something other than the delivered product
(3) If the delivered product has been modified or repaired by anyone other than the vendor
(4) Due to natural disaster, accident, or other reason not the responsibility of the vendor
In this context, the term “warranty” means solely a warranty of the individual delivered product, and does not
include any compensation for the damage caused by malfunction of the delivered product.
1.2 Scope of service
The service costs such as the costs of sending technical personnel are not included in the price of the delivered
product. Customers will be charged for the following costs:
(1) Assistance with installation adjustments and test running
(2) Maintenance inspections, adjustments, and repairs
(3) Technical assistance and technical training
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
7
2. Outline
The A3pci0104 is a 3U single-size CompactPCI board that allows the PCI mezzanine card (PMC) signal to be con-
verted to the CompactPCI signal.
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
8
3. Specification
3.1 Bus Interface
Bus rating PCI Local Bus Specification Revision 2.2
PICMG 2.0 R3.0 CompactPCI Specification
IEEE P1386, P1386.1
Signaling Level 5VTTL
Address width 32bit
Data width 32bit
Clock frequency Under 33.33MHz
3.2 Power Supply
Supply Voltage DC5.0V ±5% (supplied from backplane)
DC3.3V ±5% (supplied from backplane)
DC ±12.0V ±5% (supplied from backplane)
3.3 Mechanical Specification
Dimensions 3U,CompactPCI bus, 1slot width
External Dimensions 160mm × 100mm × 1.6mm
Weight 114g
3.4 Environmental specification
Operating Temperature Range 0 to 60°C
Operating Humidity Range 35% to 85%RH (non-condensing)
Storage Temperature Range -10 to 70°C
Storage Humidity Range Under 90%RH (non-condensing)
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
9
4. Block Diagram
Figure 4 shows a block diagram of the A3pci0104.
[Figure 4] A3pci0104 Block Diagram
CPCI
Interface
PMC
Interface
PMC
CPCI
32
32
32
A3pci0104
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
10
5. External Dimensions
Figure 5 shows a External Dimensions of the A3pci0104.
[Figure 5] External Dimensions
20.02 38
177.34
100
160
130
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
11
6. Connection
Table 6.1 shows CompactPCI connector pin assignment, and Table 6.2 shows PMC connector pin assignment. The
same signals shown in the tables are connected between the CompactPCI connector and PMC connector.
(G) .......... Connected to GND
(V) .......... Connected to 5V power supply
(NC) ....... No Connect
(*) ........... Connected between the CompactPCI connector and PMC connector via 10 resistance
[Table 6.1] CompactPCI Connector Pin Assignment
Pin A B C D E F
25 5V REQ64# (*) ENUM# (NC) 3.3V 5V GND
24 AD1 (*) 5V V(I/O) AD0 (*) ACK64# (*) GND
23 3.3V AD4 (*) AD3 (*) 5V AD2 (*) GND
22 AD7 (*) GND 3.3V AD6 (*) AD5 (*) GND
21 3.3V AD9 (*) AD8 (*) M66EN (NC) C/BE0# (*) GND
20 AD12 (*) GND V(I/O) AD11 (*) AD10 (*) GND
19 3.3V AD15 (*) AD14 (*) GND AD13 (*) GND
18 SERR# (*) GND 3.3V PAR (*) C/BE1# (*) GND
17 3.3V SDONE (*) SBO# (*) GND PERR# (*) GND
16 DVSEL# (*) GND V(I/O) STOP# (*) LOCK# (*) GND
15 3.3V FRAME# (*) IRDY# (*) GND TRDY# (*) GND
12-14 KEY AREA
11 AD18 (*) AD17 (*) AD16 (*) GND C/BE2# (*) GND
10 AD21 (*) GND 3.3V AD20 (*) AD19 (*) GND
9 C/BE3# (*) IDSEL (*) AD23 (*) GND AD22 (*) GND
8 AD26 (*) GND V(I/O) AD25 (*) AD24 (*) GND
7 AD30 (*) AD29 (*) AD28 (*) GND AD27 (*) GND
6 REQ# GND 3.3V CLK AD31 (*) GND
5 RSV (NC) RSV (NC) RST# (*) GND GNT# GND
4 RSV (NC) GND V(I/O) INTP (NC) INTS (NC) GND
3 INTA# (*) INTB# (*) INTC# (*) 5V INTD# (*) GND
2 TCK 5V TMS TDO TDI GND
1 5V -12V TRST# +12V 5V GND
<A3pci0104><A3pci0104>
<A3pci0104><A3pci0104>
<A3pci0104>
12
CN2 CN3
Pin Signal Name Pin Pin Signal Name Pin
63 GND REQ64# (*) 64 63 GND RSV (NC) 64
61 AD0 (*) 5V 62 61 ACK64# (*) 3.3V 62
59 AD2 (*) AD1 (*) 60 59 GND RSV (NC) 60
57 V(I/O) AD3 (*) 58 57 RSV (NC) RSV (NC) 58
55 AD4 (*) GND 56 55 RSV (NC) GND 56
53 AD6 (*) AD5 (*) 54 53 3.3V RSV (NC) 54
51 GND C/BE0# (*) 52 51 AD7 (*) RSV (NC) 52
49 AD9 (*) 5V 50 49 AD8 (*) 3.3V 50
47 AD12 (*) AD11 (*) 48 47 GND AD10 (*) 48
45 V(I/O) AD15 (*) 46 45 AD14 (*) AD13 (*) 46
43 PAR (*) GND 44 43 C/BE1# (*) GND 44
41 SDONE# (*) SBO# (*) 42 41 3.3V SERR# (*) 42
39 GND LOCK# (*) 40 39 PERR# (*) GND 40
37 DVSEL# (*) 5V 38 37 GND STOP# (*) 38
35 GND IRDY# (*) 36 35 TRDY# (*) 3.3V 36
33 FRAME# (*) GND 34 33 GND RSV (NC) 34
31 V(I/O) AD17 (*) 32 31 AD16 (*) C/BE2# (*) 32
29 AD19 (*) 5V 30 29 AD18 (*) GND 30
27 AD22 (*) AD21 (*) 28 27 3.3V AD20 (*) 28
25 GND C/BE3# (*) 26 25 IDSEL (*) AD23 (*) 26
23 AD25 (*) GND 24 23 AD24 (*) 3.3V 24
21 AD28 (*) AD27 (*) 22 21 GND AD26 (*) 22
19 V(I/O) AD31 (*) 20 19 AD30 (*) AD29 (*) 20
17 REQ# 5V 18 17 RSV (NC) GND 18
15 GND GNT# 16 15 3.3V BUSMODE4# (G) 16
13 CLK GND 14 13 RST# (*) BUSMODE3# (G) 14
11 GND RSV (NC) 12 11 BUSMODE2# (V) 3.3V 12
9 INTD# (*) RSV (NC) 10 9 RSV (NC) RSV (NC) 10
7 BUSMODE1# (NC) 5V 8 7 GND RSV (NC) 8
5 INTB# (*) INTC# (*) 6 5 TDI GND 6
3GND INTA# (*) 4 3TMS TDO 4
1 TCK -12V 2 1 +12V TRST# 2
[Table 6.2] PMC Connector Pin Assignment
Repairs
When you see indications suggesting that the device may be malfunctioning, first consult the manual to make sure that
all settings and connections are correct. If the abnormal condition is still not resolved, send the product to us by using
the following procedures:
Send the product to:
.......
Technical Support, Sales Division
616-4 Tanaka, Okayama 700-0951 Japan
TEL 086-245-2861
Include these items: ........ The malfunctioning product
Attach a completed copy of the attached Repair Request Ticket to the product.
How to send these items: ... Use parcel delivery service, and retain a copy of the mailing label.
You will be responsible for shipping fees.
Advanet assumes no responsibility for loss or damage occurring in shipment.
Repair costs .................... Repairs will be made free of charge within 1 year of product shipment (period of warranty).
However, you will be charged for repairs to products that have been damaged due to
customer carelessness, even during the warranty period.
Repairs to products that do not have a serial number sticker attached may be subject to
charge, even during the warranty period, so make sure the label is attached.
Repair period .................. We will strive to complete repairs to malfunctioning devices within 10 business days
after receipt. We will contact you if circumstances require more than 20 days to com-
plete repairs.
Repair Request Ticket
Return to:
Your company name:
Department:
Person in charge:
Address:
Address:
Telephone:
Telephone:
Contact:
Your company’s name:
Department
Person in Charge:
Name of Advanet product requiring repair:
Hardware serial number
Software version
Specific symptoms, error messages, etc.
Conditions under which the problem occurs (from the start, suddenly started one day, change in environment, etc.)
Frequency of occurrence (always, frequently, from time to time, after a certain period of time elapses)
(Extension) FAX
(Extension) FAX
Other information, comments, etc.
CPU board
Manufacturer
Model number
Manufacturer
Model number
Manufacturer
Product name/version
Manufacturer
Version
Other peripheral devices
Operating system
Application program
Details of circumstances relevant to the symptom
Other items attached
(included software)
Manufacturer
Product name/version
PMC Carrier Board
Manual
First edition issued November 11, 2008
B19092A0-MN002-00
Issued:
Headquarters
616-4 Tanaka, Okayama 700-0951
TEL:086-245-2861 FAX:086-245-2860
Tokyo Office
KDX Kaji-cho 4F , 3-5-2 Kanda Kaji-cho,
Chiyoda-ku, Tokyo 101-0045
TEL:03-5294-1731 FAX:03-5294-1734
INTERNETURL http://www.advanet.co.jp/
*The product names and company names appearing in this book are trademarks or registered trademarks.
Revision History
Version Date Publication Number
First edition November 11, 2008 Issued B19092A0-MN002-00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Eurotech A3pci0104 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI