Authorization Code Levels

AK-SC 255

Service Guide

ADAP-KOOL® Refrigeration Control System

Service Guide | Authorization Code Levels | AK-SC 255

© Danfoss | ADAP-KOOL® | 2018.08

2 | AX279033472246en-000101

Supervisor:

1. Allows everything to be viewed and changed including access

Refrigeration - All:

1. Can change refrigeration and lighting, both settings and

configuration

HVAC - All:

1. Can change HVAC and lighting, both settings and configuration

Refrigeration - Set:

1. Can change refrigeration or lighting settings but not

configuration:

2. So you can't add or remove a circuit (need Ref‐All or higher for

that)

and point assignment.

HVAC - Set:

1. Can change HVAC or lighting settings but not configuration:

2. Relationship between HVAC-Set and HVAC-All is similar to that

between Ref-Set and Ref-All.

Alarms:

1. Allows alarms to be acknowledged and most other screens,

except access codes can be viewed, but changes cannot be

made.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products