Item No. 206064
FOOT AND LEG SPA
User Guide
- 1 -
Thank you for purchasing the Sharper Image Foot and Leg Spa. The Foot and Leg Spa
immerses your feet in a relaxing tub of warm water, making it the perfect way to relax after
a hard day. A foot soak soothes muscles, hydrates the skin and relieves minor aches and
pains. Try a long soak for easier exfoliating! Please read this guide and store it for future
reference.
- 2 -
FEATURES
• Adjustable temperature control — 95 °F to 122 °F
• Infrared heat
• Invigorating air bubbles
• Underwater automatic massage rollers
• Automatic shut off timer (10-60 minutes)
• Aromatherapy: Add a few drops of essential oil to the
tank (essential oil not included)
• Medicinal box: Add medicinal herbs for additional
healing (herbs not included)
• Tablet box: Add herbal tablets for additional healing
(tablets not included)
• Intelligent start function: When powered on, Surf/Heat
function will activate automatically and when the water
reaches 108 °F, the Auto-Roller function will activate
• Removable cover for tank to keep water warm
• Convenient carrying handle and water drainage hose
• Accommodates women and men’s feet (up to men’s
shoe size 12)
• 5’ power cord
• Locking wheels
IDENTIFICATION OF PARTS
A. Power: On/Off button
B. Display Screen: Displays water temperature
C. Auto-Roller: Automatic foot rollers
D. Surf/Heat: Bubbles and heat
E. Temp. +: Increases water temperature (max. 122 °F/50
°C)
F. Temp. –: Decreases water temperature (min. 95 °F/35
°C)
G. Timer: Sets automatic shutoff timer (10, 20, 30, 40, 50
or 60 minutes)
H. LED status lights: Indicate active features
I. Automatic massage rollers: Activate when water
temperature reaches 108 °F, or by pressing the Auto-Roller
button (the middle and bottom rollers are automatic)
J. Water jets: Activate automatically when unit is turned on,
or by pressing the Surf/Heat button
K. Infrared heat: Activates automatically when unit is
turned on
L. Medicinal box
M. Tablet box
N. Locking wheels
BA C
H
D
E F
G
N
J
K
L
I
M
- 3 -
OPERATION
1. Attach the wheels to the base of the unit.
2. Place unit on a flat, level surface. NOTE: Use this device in a seated position.
3. Lock the wheels so it does not move during use.
4. Fill the tank with warm water to the desired level (up to 6 gallons). NOTE: Do not attempt to use
this device without water or with freezing cold water, as this will damage the unit. The minimum
and maximum water level marks are indicated on the inside of the tank. The water level should
fall between those two marks. Do not overfill the tank.
5. Plug the unit into an AC outlet. The unit will beep once when plugged in to the outlet. NOTE: Be
sure your hands are dry when plugging in the unit.
6. Press the Power button to turn the unit on. The LED screen will display the current water
temperature. The appliance will automatically warm to the defaulted temperature of 108 °F. NOTE:
When turned on, the Surf/Heat function will automatically start. When the temperature reaches
108 °F, the Auto-Roller massage function will automatically start.
7. Use the Surf/Heat button to turn the bubbles and heat on or off.
8. Use the Auto-Roller button to turn the massage rollers on or off.
9. Use the Temp. + and Temp. – buttons to adjust the water to the desired temperature. NOTE: This
unit does not have a cooling element, so the water temperature will decrease gradually.
10. Sit in a chair and place your feet in the tank. Do not attempt to stand in the unit. NOTE: Always
check temperature of the water before placing your feet into the device.
11. Press the Timer button to set the automatic shutoff timer. Select the desired time (10-60
minutes).
12. When you are finished, unplug the device. Place the cover on the tank if you wish to reuse the
water.
13. To drain the tank, position the drainage hose over a suitable drain. Open the hose to drain the
water.
CLEANING AND MAINTENANCE
• Drain water when not in use or if water becomes cloudy.
• Before draining water or cleaning the unit, turn the power off and unplug it from the AC outlet.
• Always drain water from the drainage hose. Do not pour water over the control panel.
• Clean the unit with a soft cloth and mild soap. Do not use strong abrasives, detergents or cleaning
agents.
• Do not immerse the device in water or under a shower.
• Make sure the unit is clean and dry before storing.
• Store in a clean, dry and cool place.
SAFETY WARNINGS
• CAUTION: This device can produce very hot water. Please set the heat on a low setting, then
gradually increase the temperature to a comfortable level.
• Do not leave this device unattended.
• Do not allow children to use or play with the device. Keep this device out of the reach of children.
• Do not attempt to stand in this device.
- 4 -
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
• Turn off the power and unplug the device when not in use.
• Do not use this device if you have open wounds or sores on your feet or legs.
• If you begin to feel faint or overheated, discontinue use immediately.
• Consult your doctor prior to use if you have heart disease, a pacemaker or if you are pregnant.
• Do not use this device if the power cord appears damaged or frayed. Contact Sharper Image
Customer Service Immediately.
SPECIFICATIONS
Model 206064
Voltage 120V
Frequency 60 Hz
Consumption 1000W
Protective class II
Max. temperature 50 °C (122 °F)
Water volume 6 gallons
Cord length 5’
Operating temperature 32 °F to 140 °F
Product size 14.2 L X 17.75 W X 19.3 H
Product weight 10.15 lbs.
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
/
