Primera Impressa IP60 Owner's manual

How to setup and print single 2x6 photo strips in Snappic

Single strip printing requires Photo Booth Print Server v1.2.2 or greater.

When you launch Photo Booth Print Server, select the IP60 as your printer and check the Transpose

Orientation button.

First set up Standard Config by clicking the edit button for Standard. Here select 6x4 and Portrait

orientation on the IP60. Select your quality settings as you want.

Next click on the Strip Config tab. Click the box for Single Strip Compatibility and then choose the Edit

button for printer settings. Choose 6x2 and Portrait. Select your quality settings as you want.