Lexibook RL975 Série User manual

Mode d’emploi – Instruction manual

RL975series

Lexibook® Projector Alarm Clock

RL975seriesIM1223_27May_V09.indd 1 27/05/2013 10:42 AM

3

3 2 1 7

11

9

8

6

5

4

10

RL975seriesIM1223_27May_V09.indd 2 27/05/2013 10:42 AM

Page is loading ...

6

7

ENGLISH

6

1. ALARM: To display alarm mode.

2. SET °C/°F: To display temperature in Celcius (°C) or in Fahrenheit (°F), and to conrm settings.

3. MODE: To select the setting mode.

4. SELECT: To choose a nature sound.

5. VOLUME: To adjust volume.

6. SOUND ON/OFF: TO turn sound volume on or off.

7. SNOOZE: To activate snooze function and enter setting values.

8. Projector button: To turn nightlight on/off and to project stars onto the ceiling.

9. LCD screen

10. Projector

11. Battery compartment

Battery information

Your Lexibook® Projection Alarm Clock works with 3 x 1.5V AA / LR6 type batteries (not included).

When you use the RL975series for the rst time:

1. Open the battery compartment cover located at the back of the unit.

2. Install the 3 x AA/LR6 1.5V batteries (not included) observing the polarity

markings inside the battery compartment.

3. Close the battery compartment.

IMPORTANT NOTE: For better performance, it is recommended to use alkaline

batteries with this product.

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the

product before being charged. Rechargeable batteries are only to be charged under adult supervision.

Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or

equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity.

Exhausted batteries are to be removed from the product. The supply terminals are not to be short circuited.

Do not throw batteries into a re. Remove the batteries if you are not going to use the product for a long

period of time.

Product description

WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic

discharge. Should any abnormal function occur, remove the batteries and insert them again.

1.5V AA OR LR6

RL975seriesIM1223_27May_V09.indd 7 27/05/2013 10:42 AM

8

9

ENGLISH

CLOCK

1. To set the clock, press MODE.

2. Press SNOOZE to select hour display in 12Hr or 24Hr.

3. Press SET °C/°F once: the hour digit starts ashing.

4. Press SNOOZE to change the setting value. Then press SET °C/°F to move to the next setting. The setting

sequence is displayed in the following order:

Hours Minutes Year Month Date Day of the week

5. Press MODE four times to go back to the clock mode.

ALARM

1. To set the alarm, press ALARM once.

2. Press SET °C/°F once: the hour digit starts ashing.

3. Press SNOOZE to set the hour value and then press SET °C/°F to go to the next setting.

4. Press SNOOZE to set the minute value and press SET °C/°F twice to conrm.

5. When the alarm sounds, press SNOOZE to snooze the alarm for 3 minutes or press any button (except

SELECT and VOLUME) to turn the alarm off. The alarm will ring at the same time the next day.

To deactivate the alarm:

Press ALARM to enter alarm mode. To turn the alarm off, press SET °C/°F ve times until only lines appear

on the screen. To return to clock mode, press MODE three times in a row.

Note: To change the alarm sound, press SOUND ON/OFF rst, then press SELECT repeatedly until you

have reached the nature sound of your choice. You can also simply listen to one of the 7 nature sounds by

pressing SOUND ON/OFF.

Installation

Unpacking the device

When unpacking, ensure that the following elements are included:

1 x Lexibook® Projection Alarm Clock

1 x instruction manual

WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this

product and should be discarded.

Settings

RL975seriesIM1223_27May_V09.indd 8 27/05/2013 10:42 AM

8

9

ENGLISH

Specications

Dimensions H102 x W125 x D99 mm

Batteries 3 x AA/LR6 1.5V

TIMER

1. Press MODE four times and then press SET °C/°F once.

2. Press SNOOZE to set the hour value and then press SET °C/°F to go to the next setting.

3. Press SNOOZE to set the minute value.

4. Press SET °C/°F to start the timer.

5. Press MODE once to exit timer mode and return to clock mode.

To deactivate the timer:

To turn the timer off, press SET °C/°F four times until only lines appear on the screen. To return to clock

mode, press MODE once.

CALENDAR

1. Press MODE three times.

2. Press SET °C/°F once: the hour digit starts ashing.

3. Press SNOOZE to change the setting value. Then press SET °C/°F to move to the next setting.The setting

sequence is displayed in the following order:

Hours Minutes Year Month Day of the week.

4. Press MODE twice to go back to clock mode.

To deactivate the calendar:

To turn the calendar off, press SET °C/°F four times until only lines appear on the screen. To return to clock

mode, press MODE twice.

Note: Only one event can be recorded at a time. The alarm will ring for 5 minutes when time and date of

event has been reached.

NIGHTLIGHT

Press the Projector button to switch the nightlight on. Press again to stop it.

PROJECTOR

Press the Projector button to project stars onto the ceiling. Press again to turn the projector off.

RL975seriesIM1223_27May_V09.indd 9 27/05/2013 10:42 AM

11

10

ENGLISH

Warranty

This product is covered by our 2-years warranty.

For any claim under the warranty or after sale service, please contact your distributor and present a valid

proof of purchase. Our warranty covers any manufacturing material and workmanship defect, with the

exception of any deterioration arising from the non-observance of the instruction manual or from any

careless action implemented on this item (such as dismantling, exposition to heat and humidity, etc.). It is

recommended to keep the packaging for any further reference.

In a bid to keep improving our services, we could implement modication on the colours and the details of

the product shown on the packaging.

NOTE: Please keep this instruction manual, it contains important information.

Reference: RL975series

Designed and developed in Europe – Made in China

United Kingdom & Ireland

For any further information, please call Helpline: 0808 1003015

Environmental Protection

Unwanted electrical appliances can be recycled and should not be discarded along with regular

household waste! Please actively support the conservation of resources and help protect the

environment by returning this appliance to a collection centre (if available).

This product is not a toy.

Maintenance

The nish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use a soft, clean

cloth moistened with plain, lukewarm water to clean the exterior of the unit. Use caution when cleaning and

wiping the plastic parts. Mild soap and a damp cloth may be used on the front panel.

RL975seriesIM1223_27May_V09.indd 10 27/05/2013 10:42 AM

Page is loading ...

30

RL975seriesIM1223_27May_V09.indd 31 27/05/2013 10:42 AM

RL975seriesIM1223_27May_V09.indd 32 27/05/2013 10:42 AM

Lexibook RL975 Série User manual

This manual is also suitable for

Lexibook RL975 Série User manual

in other languages

Related papers

Other documents