2. Terratec
  3. AudioCD Playback

Terratec AudioCD Playback Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Terratec AudioCD Playback Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Audio-CDs digital playback
How is it possible to playback Audio CDs under a Windows operating system
without extra wiring between soundcard and CD/DVD drive?
With Windows 98SE or Windows ME/2000/XP and an actuall version of the Media-
Players / WinAmp you have the possibility to transfer the audio signal through the
PCI bus: here is how to do:
Windows 98SE
Under Start -> Settings -> Control Panel -> Sound and Multimedia, you will find the
„Music CD“ tab. Here you must activate the CD digital playback.
Windows ME / 2000 / XP
Open the context menu „Properties“ of the CD/DVD drive in the device manager.
There you will find the option “Activate CD digital playback”; select it to enable the
data transfer over the PCI bus.
Eventually, you will need to reboot the system to benifit of this function.
Select the digital playback (for Windows Media Player) or the DirectSound output
plug-in (for WinAmp) in the software you use as well. Please note that not all
playback software allow this function.
With best regards from Nettetal -Germany
Your TerraTec Support Team
/