SUPPORTPLUS URC-F17 User manual

Type
User manual

This manual is also suitable for

TouchScreen
Universal-Fernbedienung 9 in 1
Universelle Afstandsbediening
Mando a distancia universal
Télécomande universelle
Controlo Remoto universal
Universal Remote Control
www.SupportPlus.orgwww.SupportPlus.orgwww.SupportPlus.org
www.SupportPlus.org
17
GB
User’s Manual for URC-F17
Contents
Introduction ........................................................................................18
Battery Installation ............................................................................18
Look at Your Remote .........................................................................19
Device Set-up .....................................................................................21
A. Direct Set-up (by brand and code) ..........................................21
B. Auto Search .............................................................................23
Other Set-up .......................................................................................25
A. Set up clock .............................................................................25
B. Device lock/unlock...................................................................25
C. Backlight ..................................................................................26
D. LCD on/off ...............................................................................27
E. Contrast Adjust ........................................................................28
F. Clear All...................................................................................29
Need Help?..........................................................................................30
Device Brand Code List .....................................................................87
18
Introduction
Thank you for choosing URC20-F17A universal touch screen remote
control. You have selected a new designed touch screen universal with latest
concept and technology. Based on our creative design, it has a easiest way to
set up just follow the information in the LCD screen by directly inputting letters
of the brand name or scroll up and down from the brand list (worldwide patent
pending), even without this manual book later.
The F17A touch screen universal remote controls can control almost all
brands of Television (TV), Video Recorder (VCR), (digital) Satellite receiver
(CBL/SAT), Cable box (CBL/SAT), DVD player (DVD), Tuner (TUNER), CD
player (CD), Audio cassette player (TAPE), Amplifier (AMP), amplifiers (AMP),
Laser Disc (LD) and other audio components (AUX). It has totally 9 device
buttons on the screen.
The F17 touch screen universal remote control will operate all main func-
tions of your selected devices. It supports the PIP and Menu function for your
TV as your original remote control.
The F17 touch screen universal remote control has also real time clock to
show you’re the week, time and AM or PM.
F17 will show you when batteries become low.
Please enjoy the time with this new intelligent touch screen universal
remote control.
Battery Installation
This remote control needs 4 batteries to work with. Refer to the direction
marks inside the battery apartment and put 4 pieces of fresh AA, or LR6 in
the battery apartment. Alkaline batteries are recommended since it has a lar-
ge LCD screen to take more power consumption than the common universal
remote control.
To install the batteries: 1. Turn the remote over, pull up on the tap and lift
the cover off. 2. Insert the batteries matching the batteries to the (+) and (-)
marks inside the battery case. 3. Slide the battery cover back into the place.
GB
19
Note:
Whenever the batteries need replacement, the LCD remote will indicate
with a "Battery Low" message. Please replace them with new batteries
now.
All settings you have programmed into the new remote control will be
stored in memory even you take off the batteries (but you may need to
reset the clock).
Look at Your Remote Control
Battery Low
SUN 12:00 AM
LED for Visual
Touch Screen
button
Set up key
IR Signal
Emitters
Liquid Crystal
D i s p l a y ( L C D )
screen
GB
20
SET For you start to set up (program) the remote control or show you the status
in LCD screen.
TV
VCR
CBL/SAT
CD
DVD
TUNER
TAPE
AMP
LD/AUX
Turns the device on and off .
0-9 The number keys operate the same function as on your original remote
control
MENU Works like the Menu (to adjust some features of your device) or OSD
(on-screen display) or Memory key on your original remote control.
CH
±
Works like the Channel Up and Down key on your original remote
control.
VOL
±
MUTE
REW (Fast Reverse)
PLAY (operate your DVD or CD)
FFWD (Fast Forward)
REC (Record)
STOP (terminate your operation)
PAUSE (terminate the operation for a moment and standby)
OK
EXIT
PIP
SWAP
MOVE
FREEZE
AM/FM The AM/FM allows you to select the AM or FM band on your audio sys-
tem.
Lets you select the device that you want to control.
Works like the UP/DOWN/LEFT/RIGHT/OK/EXIT Keys on your
original remote control for menu function. But during set up mode
they are used for cursor, con rm and exit to program your remote
control only.
Control the volume like the Volume Up and Down and Mute
key on your original remote control.
Picture-in-Picture, operates your television’s Picture-in-Picture
features.
GB
21
RETURN The RETURN key allows you to go to the previous channel you selec-
ted. Operates the same as the last channel.
DISP Display
PRGM Program
SLEEP The SEELP key allows you to turn your device off automatically.
TIMER Allows an event to happen at a later time, such as „turn the TV on at 7:
00PM“ Timer mode allows you to set up to four individual commands.
Must be reprogrammed after each event occurs.
Previous track.
Next track.
Notice:
Before any set up below, you must activate the remote control on first by
touching the screen or pressing any key on the remote control
Device Set-up
A. Direct Set-up (by Brand and Code)
If you know you device’s brand name, then you can set up by Direct Set-
up (search or input on screen by brand name directly and then choose the
code).
1 Turn on the device (e.g. press the ON/OFF button on your television)
you would like to operate. If it is a VCR, Please insert a tape.
2 Press and hold the SET key, then press (simultaneously) one of the
device keys on the touch screen that you would like to control (e.g.
TV key).
3 Then release the both pressed keys, the "TV Brand Search?" will
display on the screen, then press "OK" into TV brand search or press
other device key to choose another device search.
GB
22
4 You can enter the brand name either directly by letters from digit-
letter bttons on screen (or you can press the or to select the
brand), then press the OK key to confirm the brand name that you
like to control.
Note:
If you press the or key but there is no effect, that means the
search ends
5. Test the function of the keys (You must point your remote control to the
device that you want to control when testing). If none of the keys of your
new remote control work, or most of the keys work improperly, ple-
ase try one another code to be selected by or , until all main
functions operate properly.
6. Press the OK key to save the setting and LCD shows S u c c e s s -
f u l for 2 seconds and exit to current set up state. Then you can
follow the instruction on the screen to quit the set up or go to other
settings.
Input Letters „P“ „H“ „I“ „L“ „I“ ...
(or press)
Testing the Keys. If not satisfaction, press or to choose next
code
Testing the Keys, If feel the code good, press OK to save it.
TV Brand
Search? AR Systems
SET+TV
OK
Philips
053/056
PHILI
Philips
OK
Philips
042/052
or
Successful
GB
23
Remark:
1. To input the letters of the brand name, is just similar to input the words
like the mobile phone.
2. The keys of OK, EXIT only are used to set-up your new
remote. You can’t control your device during the set up.
3. If the device is locked, you must first unlock the device then setting
up.
4. If not found brand or enter error, the screen will display "NOT FOUND"
2 seconds and over again enter.
5.You can press the EXIT key to clear the wrong letter when you enter
the brand name.
6.If you wait more than 30 seconds during set up or operation, the remote
control will be quited the current state.
B. Auto Search
If you failed in the direct set-up or you can not  nd the brand name in the
screen that you want, you can use the "Auto Search" to nd the correct
code to operate your device.
1. Turn on the device (e.g. press the ON/OFF button on your television)
you would like to operate. If it is a VCR, Please insert a tape.
2. Press and hold the SET key for more than 3 seconds to start set up.
3. The screen shows "Code Setup?", and then press the "OK" key.
4. The screen shows "XX Auto Search?"(XX is a device name
and XX flash, you can press device (e.g. TV) key to select desired
device then press the "OK" key, the Auto Search begins and the
screen display "Searching?" and with code no. increasing (You must
point your remote control to the device that you want to control during Auto
Search.).The remote control automatically send ON/OFF signal of
each code to the device (code scan)
5. See if device reacts or not, once the device reacts, press any key to
stop the search.
GB
24
6. Test if main keys work good enough or not. If no key works (that
means you didn’t stop the search on time, you may press the or
keys manually to search back to find the code that you passed), or most
of keys work not good enough, please press the EXIT key to go on
the search. If main keys good enough, you can press OK to save the
code (the screen shows "save successful" for 2 seconds) and then
you can follow the instruction on the screen to quit the set up or go to
other settings.
If device response, press any key to stop the search, and test keys
If feel the code good, press OK to save it.
Remark:
1. The keys of OK, EXIT only are used to set up your new
remote control during set up, you can’t control your device at this
time.
2. If the device is locked, you must first unlock the device then set
up.
3. If you want to stop the Auto Search, you can press any key to stop
the search, then press the any device key, then follow the screen
information to stop the search.
Searching?
010/011
Searching?
021/022
OK
TV 010
SUN 11:45
Code Setup? TV Auto
Search?
SET 3S
OK
Code scan
Manu Search?
021/022
Save
Successful
GB
25
Other Set Up
A. Set up Clock
You can set up the clock on your new remote control and it will be
displayed on the screen.
1 . Press and hold the SET key for more than 3 seconds, then release
it.
2. Press the or key to select the "Configure" menu, and then
press the OK key.
3 . The screen shows "Time Setup?", then press the OK key.
4 . Press the or key to select the "12HR CLOCK" or "24HR CLO-
CK", and then press the OK key.
5 . Press the or key to select desired set up items such as day, hour
and minute, accordingly press the or key to change the day,
hour and minute.
6 . Press the OK key to save setting and LCD display S u c c e s s -
f u l for 2 seconds and exit to current set up state. You can follow
instruction on the menu to quit the set up or go to other settings
B. Device lock/unlock
You can use "Device lock" function to x current device code and this
device code can not be changed neither by brand search nor auto search.
You can select the "Unlock" to quit from this function.
1. Press and hold the "SET "key for more than 3 seconds, then release
it.
2. Press the or key to select the "Configure", and then press the OK
key.
3. Press the or key to select the "Device Lock", and then press the
OK key.
4. Press the or key to change the "Lock" or "Unlock" mode. Then press
the OK key.
GB
26
5. Press device key to select the device that you want to fix (e.g. TV).
6. Press the OK key to save setting and LCD display S u c c e s s f u l
for 2 seconds and exit to current set up state. You can follow the in-
struction on the screen to exit from set up or go to other settings.
Remark:
You can fix all current device codes.
C. Backlight
If you set "Light ON/OFF" to "OFF", the backlight will never be on. When
you set "Light ON/OFF" to "ON", the backlight will be lighted up when you
press any key and it will light up for a while even after you finish the operation.
You can adjust the on-time length of the backlight by following steps.
1. Press and hold the "SET" key for more than 3 seconds, then release
the pressed key.
2. Press the or key to select the "Configure", and then press
the OK key.
3. Press the or key to select the "Light ON /OFF? ", then press the
OK key.
4. If the screen shows "Light On" (or you press the or to choose ON),
and prees OK.
TV 010
SUN 11:45
Code Setup? Configure
Time Setup? Device Lock? Unlock?
Seccessful
SET 3S
or
OK
or
OK
Lock? Lock?
TV
Lock?
DVD
OK
DVD
OK
or
GB
27
5. Press the or key to change length of light time from 5-30 SEC and
5seconds as a step.
6. Press the OK key to save setting and LCD display S u c c e s s f u l
for 2 seconds and exit to current setup state. You can follow the
instruction on the screen to exit from the set up or go to other set-
tings.
D. LCD ON/OFF
If you set "LCD ON/OFF" to "ON", that means the LCD screen is always
on (it is convenient to see the status but it is bigger power consumption). If you
set up "LCD ON/OFF" to "OFF", the LCD screen will be on for some time and
then be off after any operation on your remote control and you can change the
length of on-time as below steps.
1. Press and hold the "SET" key for more than 3 seconds, then release
it.
2. Press the or key to select the "Configure", and then press
the OK key.
3. Press the or key to select the "LCD ON/OFF? ", then press the
OK key.
4. Suppose that you press the or key to change from "ON" to "OFF"
mode, and then press OK key.
OK
or
TV 010
SUN 11:45
Code Setup? Configure
Time Setup?
Light ON/OFF?
Light?
ON?
SET 3S
or
OK
or
OK
ON 5 SEC ON 10 SEC
TV
Seccessful
DVD
GB
28
5. Press the or key to change the LCD on-time length from 30-60 se-
conds and 10secod as a step.
6. Press the OK key to save the setting and LCD display S u c c e s s -
f u l for 2 seconds and exit to current set up state. You can follow the
instruction on screen to exit from the set up or go to other settings.
E. Contrast Adjust
1. Press and hold the "SET" key for more than 3 seconds, then release
it.
2. Press the or key to select the "Configure", and then press
the OK key.
3. Press the or key to select the Contrast”, and then press the OK
key.
4. Press the or key to adjust contrast level, when you satisfy it then
press the OK key. The screen display S u c c e s s f u l for 2 seconds
and exit to current setup state. You can follow the instruction on the
screen to exit the set up or go to other settings.
TV 010
SUN 11:45
Code Setup? Configure
Time Setup?
LCD ON/OFF?
LCD?
ON?
SET 3S
or
OK
LCD
OFF?
ON 30 SEC ON 60 SEC
oder
OK
or
Seccessful
OK
GB
29
TV 010
SUN 11:45
Code Setup? Configure
Time Setup?
Contrast Contrast
?
Adjust: 08
SET 3S
or
OK
Contrast
?
Adjust: 10
Seccessful
or
OK
or
OK
F. Clear All
To erase all the set up data, and go back to the original factory default
settings.
1. Press and hold the SET key for more than 3 seconds. Then release
it.
2. Press the or key to select the "Configure" , then press the
OK key.
3. Press the or key to select the "Clear All?", then press the OK
key.
4. The screen shows "Confirm?", press the OK key again to confirm
that clear all and LCD display S u c c e s s f u l for 2 seconds and go
back to the factory default page.
TV 010
SUN 11:45
Code Setup? Configure
Time Setup? Clear all? Confirm?
Adjust: 08
SET 3S
or
OK
Seccessful TV 042
SUN 12:00 AM
or
OK
OK
GB
30
Need Help?
If you have questions about your remote control, just call our free phone.
Before you call, please read the manual book carefully. However, if you don’t
find an answer to your questions in this manual, make a note of your device in
the table below. Tell it to the operators when you call us.
Kaufdatum: ___/ ___/ ___/
Day Month Year
Service Adresse: European Distribution Center
De Zoeker Esch 12
NL- 7582 CN Losser
Tel. Nat. / internat.: 00800/ 7777 88 99
Device Brand Model number Model number
of original
remote
Code
TV
VCR
CBL/SAT
DVD
CD
TUNER
TAPE
AMP
AUX/LD
GB
58
¿Necesita ayuda?
Si tiene alguna pregunta sobre su mando a distancia, llame gratuitamente
a nuestra línea de asistencia. Antes de llamar, lea el manual atentamente. Sin
embargo, si no encuentra una respuesta a sus dudas en él, anote su aparato
en la tabla inferior e indíquelo a los operadores cuando llame.
Fecha de compra: / / /
Día mes año
Service Adresse: European Distribution Center
De Zoeker Esch 12
NL- 7582 CN Losser
Tel. Nat. / internat.: 00800/ 7777 88 99
Aparato Marca N ú m e r o
modelo
N ú m e r o
m o d e l o
del mando
original
Código
TV
VCR
CBL/SAT
DVD
CD
TUNER
TAPE
AMP
AUX/LD
E
87
DVD
CD
TUNER
TAPE
AMP
AUX/LD
Device Brand Code List for URC20-F17
TV
Brand
TV
A.R.Systems
280
Accent
280
Acec
278
Admiral
289,290,325,349
Adyson 314,315
Agashi 314,325
AGB
364
Agef
289
Aiko
275,280,285,305,314,315,325,340,343,350
Aim
280
Akai
052,053,054,055,056,057,058,059,060,061,062,063,064,065,066,067,068,069,070,
071,072,073,074,075,076,078,105,127,140,153,211,215,259,275,280,285,299,303,305,
313,314,315,316,325,340,343,345,350,353,356,364,365,370,372,373,377
Akiba
280,316,326,354
Akito
280
Akura
271,275,280,316,325,326,348,360
Alaron
314
Alba
271,275,279,280,299,314,316,319,321,338,342,343,349,359,369,370
Albiral
054,055,077,078,079,080,097,153,176
Allorgan
312,315,330
Allstar
280
Amplivision
315,342,346
Amstrad
265,275,280,302,316,325,343,348,350,364
Anam
275,280
Anam National
280
Anglo
275,325
Anitech
275,280,325
Ansonic
275,278,280,293,299,321,323,329,342,344,347
Apollo
355
Arc en Ciel
054,057,078,099,106,136,137,172,189,190,191,192,193,196,198,199,228,272,274,
297,309,310
T V
Liste der Gerätemarkencodes
Device Brand Code List
Installation des batteries Liste des codes de
marques d’appareils
Lista dos códigos de marca dos aparelhos
Lijst merkcodes van de apparaten
Lista de los códigos de marca de los aparatos
88
Arcam
314,315
Ardem
358
Aristona
052,053,056,090,099,127,129,133,210,211,212,213,214,215,216,217,218,219,220,221,222,223,224,
225,226,227,278, 280,365
Arthur Martin
061,063,064,066,072,095,120,123,140,141,147,148,155,172,173,174,203,230,299,346
ASA
284,289,294,295,337
Asberg
280
Asora
275
Astra
048,049
Asuka
314,315,316,325,326
Atlantic
280,312,314,323
Atori
275
Auchan
299,346
Audiosonic
280,297,315,316,325,342,358
Audioton
315,325,342,358
Autovox
289,312,315,321,336
AWA
275,277,279,280,314,344,348,373
Ayomi
320
Baird
285,286,297,304,313,315
Bang& Olufsen
289
Barco
299
Basic Line
275,280,299,316,326,344
Bastide
315
Baur
276,280,305,308,331,340,361,363
Bazin
315
Beaumark
303
Beko
280,342,358,373
Beon
280,349
Best
342
Bestar
280,342,344
Binatone
315
Black Star
321
Blacktron
326
Blackway
326
Blaupunkt
065,081,082,083,084,085,086,087,088,089,305,308,311,333,334,353
Blue Sky
271,280,316,326,354,359
Blue Star
326
Bondstec
321
Boots
315
BPL
045,046,280,326
Brandt
Electronique
054,057,078,099,106,136,137,172,189,190,191,192,193,196,198,199,228,272,274,
297,309,310,335,376
Brinkmann
280,349
Brionvega
280,289
89
Britannia
314,315
Brother
325
Bruns
289
BSR
299,330
BTC
316
Bush
271,275,279,280,299,313,315,316,319,325,326,330,338,340,343,344,359,370
Capsonic
325
Carad
280,374
Carena
280,354
Carrefour
279,284
Carver
301
Cascade
275,280
Casio
280
Cathay
280
CCE
280,315
Centurion
280
Century
289,320,321
CGE
062,067,078,090,091,092,093,094,095,096,097,098,115,153,214,287,288,299,321,342,
349
Changhong
031,032,033,034,035,036,037,038,039,040,041
Cimline
275,316,319
City
275
Clarivox
078,079,080,099,100,101,102,137,200,284, 349
Clatronic
275,280,293,315,316,321,325,342,343,369
CMS hightec
315
Concorde
275
Condor
275,280,293,314,321,326,342,347,349
Contec
275,277,279,314,
Continental Edison 297,309,310,359
Cosmel
275
Crosley
062,067,078,090,091,092,093,094,095,096,097,098,099,100,115,119,214,287,288,289,
299, 321
Crown
275,280,283,313,342,349,358,359,369
Cs Electronics
314,316,321
CTC
321
Curtis Mathes
290,300
Cybertron
316
Daewoo
047,055,067,068,070,103,104,105,106,107,108,109,153,259,275,280,314,315,316,
344, 375
Dainichi
314,316
Dansai
275,280,314,325
Dansette
348
Dantax
342,358
Datsura
313
92
Hanseatic
275,280,289,299,315,326,329,330,340,342
Hantarex
275,280,293
Hantor
280
Harwood
275,280,348
Hauppauge
280
HCM
275,280,315,316,325,326,348,349
Hema
275,315
Hifivox
054,057,078,099,106,136,137,172,189,190,191,192,193,196,198,199,228,272,274,
297,309
Highline
280,325
Hikona
316
Hinari
275,279,280,299,313,316,319,330,338,352,359
Hisawa
316,326,346,354
Hit
289
Hitachi
006,007,279,280,281,285,295,299,303,307,309,310,315,317,339,355,357,364,365,
366,368
Hitachi Fujian
296
Hitsu
275,316,354
Hornyphone
278,280
Hoshai
316,354
Huanyu
314,344
Hygashi
314,315
Hyper
275,314,315,321
Hypersonic
340
Hypson
280,315,320,325,326,346,354
Iberia
280
ICE
275,280,314,315,316,325,343
Ices
314,316
Imperial
062,067,078,090,091,092,093,094,095,096,097,098,115,138,164,214,280,287,288,299,
309,321,342,349
Indiana
280
Ingelen
061,063,064,066,071,072,095,119,120,122,123,137,139,140,141,142,143,144,145,146,
147,148,149,150,151,152,173,174,202,230,359,374
Ingersoll
275
Inno Hit
275,280,285,315,316,321,327,364
Interactive
347
Interbuy
275,321,325
Interfunk
278,280,289,297,299,333,340,342,363
Internal
280
Intervision
280,293,299,315,316,321,325,326,342,343,345,353,354,358,359
Irradio
275,280,316,321,327
Isukai
280,316,326
ITC
315
ITS
280,314,316,325,326,343
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

SUPPORTPLUS URC-F17 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI