Telit Wireless Solutions LE910C1-AP Hardware Design Manual

[11.2017]

Mod.0818 2017-11 Rev.0

LE910Cx - mPCIe

HW Design Guide

1VV0301510 Rev. 4 – 2018-06-26

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 2 of 79 2018-06-26

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTICE

While reasonable efforts have been made to assure the accuracy of this document, Telit

assumes no liability resulting from any inaccuracies or omissions in this document, or from

use of the information obtained herein. The information in this document has been carefully

checked and is believed to be reliable. However, no responsibility is assumed for

inaccuracies or omissions. Telit reserves the right to make changes to any products

described herein and reserves the right to revise this document and to make changes from

time to time in content hereof with no obligation to notify any person of revisions or changes.

Telit does not assume any liability arising out of the application or use of any product,

software, or circuit described herein; neither does it convey license under its patent rights

or the rights of others.

It is possible that this publication may contain references to, or information about Telit

products (machines and programs), programming, or services that are not announced in

your country. Such references or information must not be construed to mean that Telit

intends to announce such Telit products, programming, or services in your country.

COPYRIGHTS

This instruction manual and the Telit products described in this instruction manual may be,

include or describe copyrighted Telit material, such as computer programs stored in

semiconductor memories or other media. Laws in the Italy and other countries preserve for

Telit and its licensors certain exclusive rights for copyrighted material, including the

exclusive right to copy, reproduce in any form, distribute and make derivative works of the

copyrighted material. Accordingly, any copyrighted material of Telit and its licensors

contained herein or in the Telit products described in this instruction manual may not be

copied, reproduced, distributed, merged or modified in any manner without the express

written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed

to grant either directly or by implication, estoppel, or otherwise, any license under the

copyrights, patents or patent applications of Telit, as arises by operation of law in the sale

of a product.

COMPUTER SOFTWARE COPYRIGHTS

The Telit and 3rd Party supplied Software (SW) products described in this instruction

manual may include copyrighted Telit and other 3rd Party supplied computer programs

stored in semiconductor memories or other media. Laws in the Italy and other countries

preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted

computer programs, including the exclusive right to copy or reproduce in any form the

copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party

supplied SW computer programs contained in the Telit products described in this instruction

manual may not be copied (reverse engineered) or reproduced in any manner without the

express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase

of Telit products shall not be deemed to grant either directly or by implication, estoppel, or

otherwise, any license under the copyrights, patents or patent applications of Telit or other

3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that

arises by operation of law in the sale of a product.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 3 of 79 2018-06-26

USAGE AND DISCLOSURE RESTRICTIONS

I. License Agreements

The software described in this document is the property of Telit and its licensors. It is

furnished by express license agreement only and may be used only in accordance with the

terms of such an agreement.

II. Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is

prohibited by law. No part of the software or documentation may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language or

computer language, in any form or by any means, without prior written permission of Telit

III. High Risk Materials

Components, units, or third-party products used in the product described herein are NOT

fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control

equipment in the following hazardous environments requiring fail-safe controls: the

operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air

Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its

supplier(s) specifically disclaim any expressed or implied warranty of fitness for such

High-Risk Activities.

IV. Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or

service names are the property of their respective owners.

V. Third Party Rights

The software may include Third Party Right software. In this case you agree to comply

with all terms and conditions imposed on you in respect of such separate software. In

addition to Third Party Terms, the disclaimer of warranty and limitation of liability

provisions in this License shall apply to the Third Party Right software.

TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED

FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD-

PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD-PARTY MATERIALS

FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND

THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE

SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF

SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.

NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED

AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY,

ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE

OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS

LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 4 of 79 2018-06-26

APPLICABILITY TABLE

PRODUCTS

LE910C1-NS

LE910C1-NA

LE910C4-NF

LE910C1-AP

LE910C1-EU

LE910Cx mPCIe HW Design Guide  
1VV0301510 Rev. 4   Page 5 of 79  2018-06-26 
 
Contents 
NOTICE  2 
COPYRIGHTS ................................................................................................ 2 
COMPUTER SOFTWARE COPYRIGHTS ...................................................... 2 
USAGE AND DISCLOSURE RESTRICTIONS ............................................... 3 
APPLICABILITY TABLE ................................................................................ 4 
CONTENTS .................................................................................................... 5 
1.  INTRODUCTION ........................................................................ 10 
  Scope ......................................................................................... 10 
  Audience..................................................................................... 10 
  Contact Information, Support ...................................................... 10 
  Text Conventions ........................................................................ 11 
  Related Documents .................................................................... 12 
2.  GENERAL PRODUCT DESCRIPTION ...................................... 13 
  Overview..................................................................................... 13 
  Product Variants and Frequency Bands ...................................... 14 
  Target market ............................................................................. 14 
  Main features .............................................................................. 15 
  TX Output Power ........................................................................ 17 
  RX Sensitivity ............................................................................. 17 
  Mechanical specifications ........................................................... 18 
2.7.1.  Dimensions ................................................................................. 18 
2.7.2.  Weight ........................................................................................ 18 
  Temperature range ..................................................................... 19 
3.  PINS ALLOCATION ................................................................... 20 
  Pin-out ........................................................................................ 20 
4.  POWER SUPPLY ....................................................................... 25 
  Power Supply Requirements ....................................................... 25 
  Power Consumption ................................................................... 25 
  General Design Rules ................................................................. 26 
4.3.1.  Electrical Design Guidelines ....................................................... 26 
4.3.1.1.  +5V Source Power Supply Design Guidelines ............................ 26 

LE910Cx mPCIe HW Design Guide  
1VV0301510 Rev. 4   Page 6 of 79  2018-06-26 
 
4.3.1.2.  +12V Source Power Supply Design Guidelines .......................... 27 
4.3.1.3.  Battery Source Power Supply Design Guidelines ........................ 28 
4.3.2.  Thermal Design Guidelines ......................................................... 29 
4.3.3.  Power Supply PCB layout Guidelines ......................................... 30 
  VAUX/PWRMON Power Output .................................................. 32 
  GNSS LNA BIAS ........................................................................ 33 
5.  ELECTRICAL SPECIFICATION ................................................. 34 
  Absolute Maximum Ratings – Not Operational ............................ 34 
  Recommended Operating Conditions ......................................... 34 
6.  DIGITAL SECTION .................................................................... 35 
  Logic Levels ................................................................................ 35 
  Power On.................................................................................... 38 
  Unconditional Restart.................................................................. 41 
  Power OFF procedure ................................................................ 44 
  Control signals ............................................................................ 46 
6.5.1.  WAKE_N .................................................................................... 46 
6.5.2.  W_DISABLE_N........................................................................... 48 
6.5.3.  LED_WWAN_N .......................................................................... 48 
6.5.4.  PERST_N ................................................................................... 49 
  Hardware Interfaces ................................................................... 50 
6.6.1.  USB Port..................................................................................... 50 
6.6.2.  Serial Port ................................................................................... 52 
6.6.2.1.  Modem Serial Port 1 Signals....................................................... 52 
6.6.2.2.  RS232 Level Translation ............................................................. 53 
6.6.3.  I2C - Inter-integrated Circuit ........................................................ 55 
6.6.4.  Digital Audio ............................................................................... 55 
  SIM Interface .............................................................................. 57 
7.  RF SECTION .............................................................................. 58 
  Bands Variants ........................................................................... 58 
  TX and RX characteristics .......................................................... 58 
  Antenna requirements................................................................. 58 
7.3.1.  Antenna Connectors ................................................................... 58 
7.3.2.  Main GSM/WCDMA/LTE Antenna Requirements ....................... 59 
7.3.3.  Antenna Diversity Requirements ................................................. 60 
7.3.4.  GNSS Antenna Requirements .................................................... 60 
7.3.4.1.  Combined GNSS Antenna .......................................................... 61 

LE910Cx mPCIe HW Design Guide  
1VV0301510 Rev. 4   Page 7 of 79  2018-06-26 
 
7.3.4.2.  Linear and Patch GNSS Antenna ............................................... 61 
8.  MECHANICAL DESIGN ............................................................. 62 
  Mechanical Dimensions .............................................................. 62 
8.1.1.  Mechanical Drawing ................................................................... 62 
8.1.2.  Top View..................................................................................... 62 
8.1.3.  Bottom View ............................................................................... 63 
8.1.4.  Side View.................................................................................... 64 
9.  APPLICATION PCB DESIGN .................................................... 65 
  Recommended footprint for the application ................................. 65 
10.  EMC RECOMMENDATIONS ...................................................... 66 
11.  PACKING SYSTEM ................................................................... 67 
  Tray ............................................................................................ 67 
  Tray Drawing .............................................................................. 69 
  Moisture sensitivity ..................................................................... 70 
12.  CONFORMITY ASSESSMENT ISSUES .................................... 71 
  Declaration of Conformity ........................................................... 71 
13.  SAFETY RECOMMENDATIONS................................................ 72 
  READ CAREFULLY .................................................................... 72 
14.  REFERENCE TABLE OF RF BANDS CHARACTERISTICS ..... 73 
15.  ACRONYMS ............................................................................... 76 
16.  DOCUMENT HISTORY .............................................................. 78 
 
   

LE910Cx mPCIe HW Design Guide  
1VV0301510 Rev. 4   Page 8 of 79  2018-06-26 
 
List of Tables 
TABLE 1 PRODUCT VARIANTS AND FREQUENCY BANDS ........................................................ 14 
TABLE 2 MAIN FEATURES ............................................................................................................. 16 
TABLE 3 TX OUTPUT POWER ....................................................................................................... 17 
TABLE 4 RX SENSITIVITY .............................................................................................................. 17 
TABLE 5 TEMPERATURE RANGE ................................................................................................. 19 
TABLE 6 PIN-OUT ............................................................................................................................ 24 
TABLE 7  POWER SUPPLY REQUIREMENTS .............................................................................. 25 
TABLE 8 VAUX/PWRMON POWER OUTPUT ................................................................................ 32 
TABLE 9 GNSS LNA BIAS ............................................................................................................... 33 
TABLE 10   ABSOLUTE MAXIMUM RATINGS – NOT OPERATIONAL ......................................... 34 
TABLE 11  RECOMMENDED OPERATING CONDITIONS ............................................................ 34 
TABLE 12 ABSOLUTE MAXIMUM RATING CMOS 1.8V ................................................................ 35 
TABLE 13 ABSOLUTE MAXIMUM RATING CMOS 3.3V ................................................................ 35 
TABLE 13 OPERATING RANGE CMOS 1.8V ................................................................................. 36 
TABLE 14 OPERATING RANGE CMOS 3.3V ................................................................................. 36 
TABLE 15 OPERATING RANGE SIM CARD PADS ........................................................................ 37 
TABLE 16 PERST_N ........................................................................................................................ 41 
TABLE 17 CONTROL SIGNALS ...................................................................................................... 46 
TABLE 18 PERST_N OPERATING LEVELS ................................................................................... 49 
TABLE 19 HARDWARE INTERFACES ........................................................................................... 50 
TABLE 20 USB INTERFACE ........................................................................................................... 51 
TABLE 21 MODEM SERIAL PORT 1 SIGNALS .............................................................................. 52 
TABLE 22 DIGITAL AUDIO INTERFACE ........................................................................................ 55 
TABLE 23 SIM INTERFACE SIGNALS ............................................................................................ 57 
TABLE 24 MAIN ANTENNA REQUIREMENTS ............................................................................... 59 
TABLE 25 DIVERSITY ANTENNA REQUIREMENTS ..................................................................... 60 
TABLE 26 EMC RECOMMENDATIONS .......................................................................................... 66 
TABLE 27 TRAY PACKING ............................................................................................................. 67 
TABLE 28 PACKING QUANTITIES ................................................................................................. 67 
TABLE 29 REFERENCE TABLE OF RF BANDS ............................................................................ 75 
TABLE 30 ACRONYMS.................................................................................................................... 77 
TABLE 31 DOCUMENT HISTORY .................................................................................................. 78 
 
 
   

LE910Cx mPCIe HW Design Guide  
1VV0301510 Rev. 4   Page 9 of 79  2018-06-26 
 
List of Figures 
FIGURE 1 LINEAR REGULATOR WITH 5V INPUT ........................................................................ 26 
FIGURE 2 SWITCHING REGULATOR 12V ..................................................................................... 27 
FIGURE 3 POWER SUPPLY RECOMMENDED CIRCUIT ............................................................. 31 
FIGURE 4 POWER ON TIMING DIAGRAMM.................................................................................. 38 
FIGURE 5 RECOMENDED RESET DRIVER CUIRCUIT ................................................................ 42 
FIGURE 6 SHUTDOWN BY SOFTWARE COMMAND ................................................................... 44 
FIGURE 7 WAKE_N INTERNAL DRIVER ....................................................................................... 47 
FIGURE 8 LED_WWAN_N INTERNAL DRIVER ............................................................................. 48 
FIGURE 9 LEVEL ADAPTER EXAMPLE ......................................................................................... 54 
FIGURE 10 RS232 DB-9 PINOUT ................................................................................................... 54 
FIGURE 11 SIM INTERFACE .......................................................................................................... 57 
FIGURE 12 UFL ANTENNA CONNECTORS .................................................................................. 58 
FIGURE 13 LE910C1-MPCIE TOP VIEW (DIMENSIONS ARE IN MM) ......................................... 62 
FIGURE 14 LE910C1-MPCIE BOTTOM VIEW ................................................................................ 63 
FIGURE 15 LE910C1-MPCIE SIDE VIEW ....................................................................................... 64 
FIGURE 16 LE910C1-MPCIE FOOTPRINT REFERENCE ............................................................. 65 
FIGURE 17 LE910C1-MPCIE TRAY ORGANIZATION ................................................................... 68 
FIGURE 18 LE910C1-MPCIE TRAY DRAWING ............................................................................. 69 
   

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 10 of 79 2018-06-26

1. INTRODUCTION

Scope

The aim of this document is the description of some hardware solutions useful for

developing a product with the Telit xE910Cx Mini PCIe Adapter.

Audience

This document is intended for Telit customers, especially system integrators, about to

implement their applications using the Telit xE910Cx Mini PCIe Adapter.

Contact Information, Support

For general contact, technical support services, technical questions and report

documentation errors contact Telit Technical Support at:

• TS-EM[email protected]

• TS-AM[email protected]

• TS-APAC@telit.com

• TS-SRD@telit.com

Alternatively, use:

http://www.telit.com/support

For detailed information about where you can buy the Telit modules or for

recommendations on accessories and components visit:

http://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your comments

and suggestions for improvements.

Telit appreciates feedback from the users of our information.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 11 of 79 2018-06-26

Text Conventions

Danger – This information MUST be followed or catastrophic

equipment failure or bodily injury may occur.

Caution or Warning – Alerts the user to important points about

integrating the module, if these points are not followed, the module and

end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be

useful when integrating the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 12 of 79 2018-06-26

Related Documents

[1] LE910C1 Hardware User Guide 1VV0301298

[2] LE920x4/LE910Cx AT Command User Guide 80490ST10778A

[3] Telit EVB User Guide 1VV0301249

[4] mPCIe_IFBD_HW_USER_GUIDE 1VV0301483

[5] LE910/LE920 Digital Voice Interface Application Note 80000NT11246A

[6] Event Monitor Application Note 80000NT10028a

[7] PCI Express Mini Card Electromechanical Specification Revision 2.1

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 13 of 79 2018-06-26

2. GENERAL PRODUCT DESCRIPTION

Overview

The aim of this document is to present possible and recommended hardware solutions

useful for developing a product with the Telit LE910Cx-mPCIe module.

LE910Cx-mPCIe is Telit platform for Mini PCIe applications, such as M2M applications,

industrial mobile router and table PC, based on the following technologies:

• LTE / WCDMA networks for data communication

• Designed for industrial grade quality

In its most basic use case, LE910Cx-mPCIe can be applied as a wireless communication

front-end for mobile router products, offering mobile communication features to an

external host CPU through its rich interfaces. LE910Cx-mPCIe can further support

customer software applications and security features. LE910Cx-mPCIe

provides a software application development environment with sufficient system resources

for creating rich on-board applications. Thanks to a dedicated application processor and

embedded security resources, product developers and manufacturers can create products

that guarantee fraud prevention and tamper evidence without extra effort for additional

security precautions. LE910Cx-mPCIe is available in hardware and band variants as listed

in 2.2 Product Variants and Frequency Bands.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 14 of 79 2018-06-26

Product Variants and Frequency Bands

LE910Cx modules bands combinations are listed below:

Product

2G Band

3G Band

4G Band

Region

LE910C1-NA

2, 3, 5, 8

1, 2, 4, 5, 8

2, 4, 12

North America

LE910C1-AP

-

1, 5, 8

1, 3, 5, 8, 28

Asia-Pacific

LE910C1-NS

-

2, 4, 5, 12, 25, 26

North America

- Sprint

LE910C4-NF

-

2, 4, 5

2, 4, 5, 12, 13, 14,

66, 71

North America

LE910C1-NF

-

2, 4, 5

2, 4, 5, 12, 13, 14,

66, 71

North America

LE910C1-EU

3, 8

1, 3, 8

1, 3, 7, 8, 20, 28A

Europe

Table 1 Product Variants and Frequency Bands

Refer to Chapter Reference Table of RF Bands Characteristics 14 for details information

about frequencies and bands.

Target market

LE910Cx-mPCIe can be used for wide variety applications, where low power consumption

and low cost are required while sufficient data rates are achieved:

• Mini PCIe applications

• Mobile router

• Notebook PC

• M2M applications

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 15 of 79 2018-06-26

Main features

Function

Features

Modem

• Multi-RAT cellular modem for voice and data communication

• LTE FDD Catx data rates per the module variant used.

• Carrier aggregation is not supported

• GSM/GPRS/EDGE

• WCDMA up to DC HSPA+, Rel.9

• Regional variants with optimal choice of RF bands

• coverage of countries and MNOs

• State-of-the-art GNSS solution with

GPS/GLONASS/BeiDou/Galileo/QZSS receiver

Digital audio

subsystem

• PCM/I2S digital audio interface

• Up to 48 kHz sample rate, 16 bit words

USIM ports – dual

voltage

• Class B and Class C support

• Hot swap support

• Clock rates up to 4 MHz

Application

processor

Application processor to run customer application code

• 32 bit ARM Cortex-A7 up to 1.3 GHz running the Linux operating

system

• Flash + DDR are large enough to allow for customer’s own

software applications

Interfaces

• USB2.0 – USB port is typically used for:

• Flashing of firmware and module configuration

• Production testing

• Accessing the Application Processor’s file system

• AT command access

• High-speed WWAN access to external host

• Diagnostic monitoring and debugging

• Communication between Java application environment

and an external host CPU

• NMEA data to an external host CPU

• Peripheral Ports – I2C, UART

• GPIOs

• Antenna ports

Form factor

Full-Mini Card 52 pin, 50.95mm x 30mm x 1mm.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 16 of 79 2018-06-26

Environment and

quality requirements

The entire module is designed and qualified by Telit for satisfying

the environment and quality requirements.

Single supply

module

The module generates all its internal supply voltages.

RTC

No dedicated RTC supply, RTC is supplied by VBATT

Table 2 Main features

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 17 of 79 2018-06-26

TX Output Power

Technology

Power (dBm)

2G LB

32

2G HB

29

3G/TD-SCDMA

23

4G FDD

22 @1RB

Table 3 TX Output Power

RX Sensitivity

Technology

Sensitivity (dBm)

2G

-107

3G/TD-SCDMA

-112

4G FDD (BW=5 MHz)

-102

Table 4 RX Sensitivity

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 18 of 79 2018-06-26

Mechanical specifications

2.7.1. Dimensions

The overall dimensions of LE910Cx-mPCIe family are:

 Length: 50.95 mm

 Width: 30 mm

 Thickness : 3.2 mm (Version with SIM holder : 4.62 mm)

2.7.2. Weight

The nominal weight of the module is 7 grams.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 19 of 79 2018-06-26

Temperature range

Case

Range

Note

Operating

Temperature

Range

–20°C ÷ +55°C

The module is fully functional(*) in all the

temperature range, and it fully meets the

3GPP specifications.

–40°C ÷ +85°C

The module is fully functional (*) in all the

temperature range.

However, there may be some

performance deviations in this extended

range relative to 3GPP requirements,

which means that some RF parameters

may deviate from the 3GPP specification

in the order of a few dB.

For example: receiver sensitivity or

maximum output power may be slightly

degraded

Storage and non-

operating

Temperature

Range

–40°C ÷ +105°C

Table 5 Temperature range

(*) Functional: the module is able to make and receive calls, data connection and SMS.

LE910Cx mPCIe HW Design Guide

1VV0301510 Rev. 4 Page 20 of 79 2018-06-26

3. PINS ALLOCATION

Pin-out

LE910C1 mPCIe Pin out follows the mPCIe specification [7]

Signal

I/O

Function

Type

Comment

Power Supply

24

3V3

-

3.3V Main Power

Supply

Power

Supply for 3.3V I/O

UART/DVI interface

2

3V3_AUX

-

3.3V Main Power

Supply

Power

39

3V3_AUX

-

3.3V Main Power

Supply

Power

41

3V3_AUX

-

3.3V Main Power

Supply

Power

52

3V3_AUX

-

3.3V Main Power

Supply

Power

4

GND

-

Ground

9

GND

-

Ground

15

GND

-

Ground

18

GND

-

Ground

21

GND

-

Ground

26

GND

-

Ground

27

GND

-

Ground

29

GND

-

Ground

34

GND

-

Ground

35

GND

-

Ground

37

GND

-

Ground

Page is loading ...

Telit Wireless Solutions LE910C1-AP Hardware Design Manual

This manual is also suitable for

Telit Wireless Solutions LE910C1-AP Hardware Design Manual

Related papers

Other documents