PCI EXPRESS BACKPLANE
QUICK START GUIDE
Thank you for purchasing the Datapath Express backplane.
The Datapath range of Express backplanes are static sensitive and are packed in
anti-static materials. It is recommended the backplane remains in its packaging until
you are ready to install it into a chassis.
The backplanes are xed to the chassis by screwing them down on to the mounts
located in the host chassis. Ensure the rear of the backplane is facing the rear of the
chassis.
Full tting instructions and connector descriptions can be found in the
Express Backplane User Guide which can be downloaded from our website at
www.datapath.co.uk/images/manuals/Express_Backplanes_User_Guide.pdf.
Page 3