VTech CS6124-31 User manual

Brand: VTech

Model: CS6124-31

Category: Telephones

Type: User manual

This manual is also suitable for

What’s in the box

Your telephone package contains the following

items. Save your sales receipt and original

packaging in the event warranty service is

necessary.

Telephone base overview

1 – /REPEAT

• Repeat a message.

• Press twice to play the previous message.

2 – /SKIP

• Skip to the next message.

3 – /FIND HANDSET

• Page all system handsets.

4 – Charging pole

5 – Speakerphone

6 – X/DELETE

• Delete the playing message.

• Press twice to delete all old messages.

7 – Message window

8 – /PLAY/STOP

• Play messages.

• Stop playing messages.

9 – p/q/VOLUME

• Adjust the listening volume.

• Adjust the telephone base ringer volume.

10 – /ANS ON/OFF

• Turn on or off the answering system.

11 – IN USE light

• Flashes when there is an incoming call, or

another telephone sharing the same line is in use.

• On when the telephone is in use, or the

answering system is answering a call.

Handset overview

1 – Handset earpiece

2 – LCD display

3 – CID/VOL-

• Review the caller ID log when the telephone is not

in use.

• Scroll down while in a menu, or in the directory,

caller ID log or redial list.

• Move the cursor to the left when entering numbers

or names.

• Decrease the listening volume during a call or

message playback.

4 – /FLASH

• Make or answer a call.

• Answer an incoming call when you receive a call

waiting alert.

5 – 1

• Press repeatedly to add or remove 1 in front of the

caller ID log entry before dialing or saving it to the

directory.

6 – TONE

• Switch to tone dialing temporarily during a call.

7 – MUTE/DELETE

• Mute the microphone during a call.

• Silence the handset ringer temporarily while the

phone is ringing.

• Delete the displayed entry while reviewing the

directory, caller ID log or redial list.

• Delete digits or characters when entering numbers

or names.

8 – Microphone

9 – Charging pole

10 – MENU/SELECT

• Show the menu.

• While in a menu, press to select an item, or save

an entry or setting.

11 – /VOL+

• Review the directory when the phone is not in

use.

• Scroll up while in a menu, or in the directory,

caller ID log or redial list.

• Move the cursor to the right when entering

numbers or names.

• Increase the listening volume during a call or

message playback.

12 – OFF/CANCEL

• Hang up a call.

• Return to the previous menu or idle mode without

making changes.

• Delete digits while predialing.

• Silence the handset ringer temporarily while the

phone is ringing.

• Erase the missed call indicator while the handset

is not in use.

13 – 0/OPER

• Enter space character during text editing.

14 – #

• Show other dialing options when reviewing a

caller ID log entry.

15 –

REDIAL/PAUSE

• Review the redial list.

• Insert a dialing pause while dialing or entering

numbers into the directory.

16 – Battery compartment cover

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes when the

battery is low and needs charging.

The battery icon animates when the

battery is charging.

The battery icon becomes solid when

the battery is fully charged.

There are new messages on the

built-in answering system.

There are new voicemail received

from your telephone service provider.

NEW

There are new caller ID log entries.

ANS ON

The answering system is turned on.

The message number currently

playing.

Connect

You can choose to connect the telephone base

for desktop usage or wall mounting.

NOTES

• Use only the adapters provided.

• Make sure the electrical outlets are not controlled by

wall switches.

• The adapters are intended to be correctly oriented in

a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into

a ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line (DSL) high-

speed Internet service through your telephone line,

make sure you install a DSL lter (not included)

between the telephone line cord and telephone wall

jack. Contact your DSL service provider for more

information.

Connect the telephone base

Connect the charger

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

• Use only supplied battery.

• Charge the battery provided with this product only

in accordance with the instructions and limitations

speciﬁed in this manual.

• If the handset will not be used for a long time,

disconnect and remove the battery to prevent

possible leakage.

Charge the battery

Place the handset in the telephone base or the

charger to charge.

Once you have installed the battery, the handset

LCD display indicates the battery status (see the

table below).

NOTES

• For best performance, keep the handset in the

telephone base or charger when not in use.

• The battery is fully charged after 16 hours of

continuous charging.

• If you place the handset in the telephone base or

the charger without plugging in the battery, the

screen displays No battery.

Battery

indicators

Battery status Action

The screen

is blank, or

displays Put in

charger and

ﬂashes.

The battery has

no or very little

charge. The

handset cannot

be used.

Charge without

interruption

(at least 30

minutes).

The screen

displays

Low battery

and ﬂashes.

The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery is

charged.

To keep the

battery charged,

place it in the

telephone base

or charger when

not in use.

Before use

After you install your telephone or power returns

following a power outage, the handset will prompt

you to set the date and time.

Set date and time

NOTE

• Make sure you set the date and time including the

year correctly; otherwise the answering system does

not announce the correct day of the week for your

recorded messages time stamp.

1. Use the dialing keys (0-9) to enter the month

(MM), date (DD) and year (YY). Then press

SELECT.

2. Use the dialing keys (0-9) to enter the hour

(HH) and minute (MM). Then press

q or p

choose AM or PM.

3. Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the installation is

successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you have

changed your telephone service to digital

service from a cable company or a VoIP

service provider, the telephone line may need

to be rewired to allow all existing telephone

jacks to work. Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance - which

can vary with the locations of the telephone base

and handset, the weather, and the layout of your

home or ofﬁce.

When the handset is out of range, the handset

displays Out of range or no pwr at base.

If there is a call while the handset is out of range,

it may not ring, or if it does ring, the call may not

connect well when you press . Move closer to

the telephone base, then press to answer the

call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move closer

to the telephone base.

Use the handset menu

1. Press MENU when the phone is not in use.

2. Press or until the screen displays the

desired feature menu.

3. Press SELECT.

• To return to the previous menu, press

CANCEL.

• To return to idle mode, press and hold

CANCEL.

Congure your telephone

Set language

The LCD language is preset to English. You can

select English, French or Spanish to be used in all

screen displays.

1. Press MENU when the handset is not in use.

2. Scroll to Settings, then press SELECT twice.

3. Scroll to choose English, Français or

Español.

4. Press SELECT twice to save your setting.

Set date and time

NOTE

• Make sure you set the date and time including the

year correctly; otherwise the answering system does

not announce the correct day of the week for your

recorded messages time stamp.

1. Press MENU on the handset when not in use.

2. Scroll to Set date/time and then press

SELECT.

3. Use the dialing keys (0-9) to enter the month

(MM), date (DD) and year (YY). Then press

SELECT.

4. Use the dialing keys (0-9) to enter the hour

(HH) and minute (MM). Then press

q or p

choose AM or PM.

5. Press SELECT.

Temporary tone dialing

If you have pulse (rotary) service only, you

can switch from pulse to touch-tone dialing

temporarily during a call.

1. During a call, press TONE .

2. Use the dialing keys to enter the relevant

number. The telephone sends touch-tone

signals. It automatically returns to pulse dialing

mode after you end the call.

Telephone operations

Make a call

• Press , and then dial the telephone number.

Answer a call

• Press or any of the dialing keys.

End a call:

• Press OFF or put the handset back in the

telephone base or charger.

Volume

• During a call, press VOL- or VOL+ to adjust

the listening volume.

Mute

The mute function allows you to hear the other party

but the other party cannot hear you.

1. During a call, press MUTE. The handset

displays Muted.

2. Press MUTE again to resume the

conversation. The handset displays

Microphone on brieﬂy.

Join a call in progress (for multiple handset

models only)

You can use three handsets at a time on an

outside call.

• When a handset is already on a call, press

on another handset to join the call.

• To exit the call, press OFF on the handset or

place it in the telephone base or charger. The

call continues until all handsets hang up.

Call waiting

When you subscribe to call waiting service from

your telephone service provider, you hear an alert

tone if there is an incoming call while you are

already on a call.

• Press FLASH to put the current call on hold

and take the new call.

• Press FLASH at any time to switch back and

forth between calls.

Find handset

Use this feature to ﬁnd the system handset.

To start paging:

• Press /FIND HANDSET on the telephone

base when not in use. All idle handsets ring

and display ** Paging **.

To end paging:

• Press /FIND HANDSET at the telephone

base.

-OR-

• Press or any of the dialing keys on the

handset.

NOTE

• Do not press and hold /FIND HANDSET for

more than four seconds. It may lead to handset

deregistration.

Redial list

Each handset stores the last ﬁve telephone

numbers dialed. When there are already ﬁve

entries, the oldest entry is deleted to make room

for the new entry.

Review and dial a redial list entry

1. Press REDIAL when the handset is not in use.

2. Press q, p or REDIAL repeatedly until the

desired entry displays.

3. Press to dial.

Delete a redial list entry

• When the desired redial entry displays, press

DELETE.

Category

Built-in

answering system

Voicemail from

telephone

service

Storage Messages are

stored in the

telephone base.

Messages are

stored in a

server or system

provided by your

telephone service

provider.

Your messages

will not be deleted

automatically.

You have to delete

your messages

manually.

Your messages

may be

automatically

deleted after a

period of time.

Contact your

telephone service

provider for more

details.

Method

to retrieve

messages

When you

received new

messages,

the handset

displays XX new

messages and

, and the

message window

on the telephone

base ﬂashes.

When you

received new

messages, the

handset displays

and New

voicemail.

To retrieve

messages, usually

there are two

ways:

• Press on

the telephone

base; or

• Access

remotely with

an access

code.

To retrieve

messages, you

need an access

number and/

or a passcode

provided by your

telephone service

provider.

Set your built-in answering system

The answering system can record and store

up to 99 messages. Each message can be up

to three minutes in length. The total storage

capacity for the announcement, messages and

memos is approximately 14 minutes. The actual

recording time depends on individual message

characteristics.

Your answering system allows you to set your

announcement, to save and delete messages,

activate call screening, to set number of rings

before pick up, to access remotely, and to control

the recording time.

Turn the answering system on or off

The answering system must be turned on to

answer and record messages.

To turn on or off with the telephone base:

• Press /ANS ON/OFF to turn the built-in

answering system on or off.

To turn on or off with the handset:

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press

SELECT.

3. Scroll to Answer on/off and then press

SELECT.

4. Press q or p to choose On or Off and then

press SELECT.

Default announcement

The telephone is preset with a greeting that

answers calls with “Hello, please leave a

message after the tone.” You can use this preset

announcement, or replace it with your own.

Record your own announcement

The announcement can be up to 90 seconds in

length.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT

twice.

3. The handset announces, “To play, press 2. To

record, press 7.” Then press 7 to record.

4. The handset announces, “Record after the

tone. Press 5 when you are done.” After the

tone, speak towards the handset microphone.

5. Press 5 when done.

Play the announcement

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT

twice.

3. The handset announces, “To play, press 2.

To record, press 7.” Then press 2 to play the

current announcement.

Options during playback:

• Press VOL

or VOL

to adjust the listening

volume.

• Press 5 or OFF to stop at any time.

Delete the announcement

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT

twice.

3. The handset announces, “To play, press 2. To

record, press 7.” Then press 3 to delete your

own recorded announcement.

NOTE

• After you deleted your own recorded announcement,

the answering system answers calls with the default

announcement.

Set number of rings

You can set the answering system to answer an

incoming call after two, three, four, ﬁve or six

rings; or toll saver. If you choose toll saver, the

answering system answers a call after two rings

when you have new messages, or after four rings

when you have no new messages.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press

SELECT.

3. Scroll to Ans sys setup and then press

SELECT.

4. Scroll to # of rings and then press SELECT.

5. Press q or p to choose 6, 5, 4, 3, 2 or Toll

saver and then press SELECT.

Set recording time

You can set the recording time for each incoming

message.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press

SELECT.

3. Scroll to Ans sys setup and then press

SELECT.

4. Scroll to Recording time and then press

SELECT.

5. Press q or p to choose 3 minutes,

2 minutes or 1 minute, and then press

SELECT.

Use your built-in answering system

New message indication

When there are new answering system

messages, the handset displays XX new

messages and , and the message window

on the telephone base ﬂashes. When you are

reviewing a new message, NEW and display

on the handset.

If the message alert tone is turned on, the

telephone base beeps every 10 seconds when

there are messages that have not been reviewed.

Message playback

To playback messages at the telephone base:

• Press when the phone is not in use.

Options during playback:

• Press /VOLUME or /VOLUME to adjust

the listening volume.

• Press /SKIP to skip to the next message.

• Press /REPEAT to repeat the playing

message. Press /REPEAT twice to listen to

the previous message.

• Press X/DELETE to delete the playing message.

The system advances to the next message.

• Press /STOP to stop.

To playback messages with a handset:

• Press MENU when the phone is not in use,

and then press SELECT.

Options during playback:

• Press VOL- or VOL+ to adjust the listening

volume.

• Press 6 to skip to the next message.

• Press 4 to repeat the playing message. Press

4 twice to listen to the previous message.

• Press 3 to delete the playing message. The

system advances to the next message.

• Press OFF to stop the playback.

Delete all messages

You can only delete old (reviewed) messages.

You cannot delete new messages until you review

them. You cannot retrieve deleted messages.

To delete all messages with the telephone

base:

• Press X/DELETE twice when the phone is not

in use.

To delete all messages with a handset:

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Delete all old and then press

SELECT twice.

Remote access

A two-digit security code is required to access the

answering system remotely from any touch-tone

telephone. The preset code is 19. You can use

this preset code, or set your own.

1. Dial your telephone number from any touch-

tone telephone.

2. When the system plays your announcement,

enter the two-digit security code.

3. Enter one of the following remote commands.

Command Description

Play all messages.

Play only new messages.

Delete the current message (during

playback).

Delete all old messages.

Repeat the current message (during

playback).

Stop.

Hear a list of remote commands.

Skip to the next message (during

playback).

Record a new announcement.

End the call.

Turn the answering system on or off.

4. Hang up or press 8 to end the call.

Remote access code

You can set your own remote access code from

00 to 99.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press

SELECT.

3. Scroll to Ans sys setup and then press

SELECT.

4. Scroll to Remote code and then press

SELECT.

5. Press the dialing keys (0-9) to enter the code,

or q or p to select from 00 to 99, then press

SELECT.

Use the built-in answering system

and voicemail service

You can use your answering system and

voicemail service together by setting your

answering system to answer before voicemail

service answers as described below. To learn

how to program your voicemail settings, contact

your telephone service provider.

If you are on a call, or if the answering system

is busy recording a message and you receive

another call, the second caller can leave a

voicemail message.

Set your answering system to answer calls

at least two rings earlier than your voicemail

service is set to answer. For example, if your

voicemail service answers after six rings, set

your answering system to answer after four rings.

Some voicemail service providers may program

the delay before answering calls in seconds

instead of rings. In this case, allow six seconds

per ring when determining the appropriate setting.

Retrieve voicemail from telephone

service

Voicemail is a feature available from most

telephone service providers. It may be included

with your telephone service, or may be optional.

Fees may apply.

Retrieve voicemail

When you received a voicemail, the handset

displays and New voicemail. To retrieve,

you typically dial an access number provided by

your telephone service provider, and then enter

a security code. Contact your telephone service

provider for instructions on how to conﬁgure the

voicemail settings and listen to messages.

NOTE

• After you have listened to all new voicemail

messages, the indicators on the handset turn off

automatically.

Turn off the new voicemail indicators

If you have retrieved your voicemail while away

from home, and the handset still displays the new

voicemail indicators, use this feature to turn off

the indicators.

NOTE

• This feature turns off the indicators only, it does not

delete your voicemail messages.

1. Press MENU when the phone is not in use.

2. Scroll to Settings and then press SELECT.

3. Scroll to Clr voicemail and then press

SELECT.

4. Press SELECT again to conﬁrm.

When your handset is deregistered from the

telephone base, follow the steps below to register

it back to the telephone base.

1. Remove the handset from the telephone base.

2. Press and hold /FIND HANDSET at the

telephone base for about four seconds until

the IN USE light turns on.

3. Then press # on the handset. It displays

Registering...

The handset show Registered and you hear a

beep when the registration process completes.

The registration process takes about 60 seconds

to complete.

General product care

Taking care of your telephone

Your cordless telephone contains sophisticated

electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original

packing materials to protect your telephone if you

ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet.

Do not use the handset outdoors in the rain,

or handle it with wet hands. Do not install the

telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power

surges harmful to electronic equipment. For your

own safety, take caution when using electrical

appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that

should retain its luster for many years. Clean it

only with a dry non-abrasive cloth. Do not use

dampened cloth or cleaning solvents of any kind.

Frequently asked questions

Below are the questions most frequently asked

about the cordless telephone. If you cannot ﬁnd

the answer to your question, visit our website at

www.vtechphones.com or call 1 (800) 595-9511

for customer service.

My telephone

does not work

at all.

Make sure the telephone

base is installed properly,

and battery is installed

and charged correctly. For

optimum daily performance,

return the handset to the

telephone base after use.

The display

shows No line.

I cannot hear the

dial tone.

Disconnect the telephone

line cord from your

telephone and connect it to

another telephone. If there

is no dial tone on that other

telephone either, then the

telephone line cord may be

defective. Try installing a

new telephone line cord.

If changing the telephone

line cord does not help,

the wall jack (or the wiring

to this wall jack) may be

defective. Contact your

telephone service provider.

You may be using a new

cable or VoIP service, the

existing telephone jacks in

your home may no longer

work. Contact your service

provider for solutions.

The answering

system does

not record

messages.

Make sure the answering

system is on. When the

answering system is on,

ANS ON should display

on the handset and the

telephone base.

When the answering

machine memory is full,

it does not record new

messages until some old

messages are deleted.

If you subscribe to voicemail

service, change the

number of rings so that

your answering system

answers before your

voicemail service answers.

To determine how many

rings activate your voicemail

service, contact your

telephone service provider.

The answering

system does

not announce

the correct day

of the week

for recorded

messages time

stamp.

Make sure you have set

the date and time. See

Congure your telephone

section.

The messages

on the answering

system are

incomplete.

If a caller leaves a very long

message, part of it may be

lost when the answering

system disconnects the call

after the preset recording

time.

If the memory on the

answering system becomes

full during a message, the

answering system stops

recording and disconnects

the call.

I accidentally

set my LCD

language to

Spanish or

French, and I

don’t know how

to change it back

to English.

While the handset is not

in use, press MENU and

then enter 364# to change

the handset LCD language

back to English.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants

to the holder of a valid proof of purchase

(“Consumer” or “you”) that the Product and

all accessories provided in the sales package

(“Product”) are free from defects in material and

workmanship, pursuant to the following terms

and conditions, when installed and used normally

and in accordance with the Product operating

instructions. This limited warranty extends only to

the Consumer for Products purchased and used

in the United States of America and Canada.

What will VTech do if the Product is not free

from defects in materials and workmanship

during the limited warranty period (“Materially

Defective Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair

or replace at VTech’s option, without charge,

a Materially Defective Product. If we repair

the Product, we may use new or refurbished

replacement parts. If we choose to replace

the Product, we may replace it with a new or

refurbished Product of the same or similar

design. We will retain defective parts, modules, or

equipment. Repair or replacement of the Product,

at VTech’s option, is your exclusive remedy.

VTech will return the repaired or replacement

Products to you in working condition. You

should expect the repair or replacement to take

approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product

extends for ONE (1) YEAR from the date

of purchase. If VTech repairs or replaces a

Materially Defective Product under the terms of

this limited warranty, this limited warranty also

applies to the repaired or replacement Product

for a period of either (a) 90 days from the date the

repaired or replacement Product is shipped to you

or (b) the time remaining on the original one-year

warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, ﬁre, water or other

liquid intrusion;

2. Product that has been damaged due to repair,

alteration or modiﬁcation by anyone other than

an authorized service representative of VTech;

3. Product to the extent that the problem

experienced is caused by signal conditions,

network reliability, or cable or antenna systems;

4. Product to the extent that the problem is caused

by use with non-VTech accessories;

5. Product whose warranty/quality stickers,

product serial number plates or electronic

serial numbers have been removed, altered or

rendered illegible;

6. Product purchased, used, serviced, or shipped

for repair from outside the United States of

America or Canada, or used for commercial or

institutional purposes (including but not limited

to Products used for rental purposes);

7. Product returned without a valid proof of

purchase (see item 2 below); or

8. Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems

outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please

visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to www.

vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls

and features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery

or handling charges incurred in the transport of

the Product(s) to the service location. VTech

will return repaired or replaced Product under

this limited warranty. Transportation, delivery or

handling charges are prepaid. VTech assumes no

risk for damage or loss of the Product in transit.

If the Product failure is not covered by this limited

warranty, or proof of purchase does not meet the

terms of this limited warranty, VTech will notify you

and will request that you authorize the cost of repair

prior to any further repair activity. You must pay for

the cost of repair and return shipping costs for the

repair of Products that are not covered by this limited

warranty.

What must you return with the Product to get

warranty service?

1. Return the entire original package and

contents including the Product to the VTech

service location along with a description of the

malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales

receipt) identifying the Product purchased

(Product model) and the date of purchase or

receipt; and

3. Provide your name, complete and correct

mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech. It supersedes

all other written or oral communications

related to this Product. VTech provides no

other warranties for this Product. The warranty

exclusively describes all of VTech’s responsibilities

regarding the Product. There are no other

express warranties. No one is authorized to make

modiﬁcations to this limited warranty and you

should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives

you speciﬁc legal rights, and you may also have

other rights, which vary from state to state or

province to province.

Limitations: Implied warranties, including those of

ﬁtness for a particular purpose and merchantability

(an unwritten warranty that the Product is ﬁt for

ordinary use) are limited to one year from the date

of purchase. Some states/provinces do not allow

limitations on how long an implied warranty lasts,

so the above limitation may not apply to you. In no

event shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages

(including, but not limited to lost proﬁts or revenue,

inability to use the Product or other associated

equipment, the cost of substitute equipment, and

claims by third parties) resulting from the use

of this Product. Some states/provinces do not

allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or

exclusion may not apply to you.

Please retain your original sales receipt

as proof of purchase.

Technical specications

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

1921.536-1928.448 MHz

Channels 5

Nominal

effective

range

Maximum power allowed by

FCC and IC. Actual operating

range may vary according to

environmental conditions at the

time of use.

Power

requirements

Handset: 2.4V Ni-MH battery

Telephone base: 6V DC @ 400mA

Charger: 6V AC @ 300mA

Memory Directory:

30 memory locations;

up to 30 digits and 15 characters

Caller ID log:

30 memory locations;

up to 24 digits and 15 characters

Handset control key panel:

CANCEL

Telephone base control key panel:

Speciﬁcations are subject to change without notice.

Document order number: 91-007061-030-100

VTech CS6124-31 User manual

Brand: VTech

Model: CS6124-31

Category: Telephones

Type: User manual

This manual is also suitable for

Download PDF

report

VTech CS6124-31 User manual

This manual is also suitable for

VTech CS6124-31 User manual

Related papers

Other documents