Human Touch Laptop Desk User manual

Perfect Chair

®

Laptop Desk

ENG FRC ESN

use & care manual

mode d’emploi et d’entretien

manual de uso y cuidado

®

, LLC. Patents pending and intellectual property rights enforced.

No medical claims are warranted or implied by the use of this product.

Human Touch is a trademark of Human Touch

®

, LLC.

PC-LD-C1

humantouch.com

800.355.2762

use & care manual

Register your product ONLINE Today

www.humantouch.com/register

Register your product ONLINE Today

www.humantouch.com/register

ENGLISH

humantouch.com

The Perfect Chair Laptop Desk adds a whole new dimension to your already Perfect

Chair. Now you can rest your laptop, notebook, netbook computer, iPad, book,

papers, or handcraft on your convenient Laptop Desk, and work comfortably for

hours in either an upright or partially reclined position.

Your Perfect Chair Laptop Desk was designed with every aspect of your comfort and

convenience in mind. It installs quickly, using provided tools, and is easily adjustable

to different heights. It swings easily out of the way for chair entry/exit or for optimal

camera angle during video conferencing, yet stays in place when in use. It also

enables precise horizontal leveling and tilts and swivels to the perfect position, while

flexible edge stops hold your device in place and convenient clips keep cables out of

the way.

Having a party and want it out of the way? Simply flip the laptop desk over to the

side of the chair.

To ensure that you don’t overlook any of your Laptop Desk features, and that you use

it safely, read this manual carefully. Then sit back, relax, and enjoy!

welcome to human touch

®

humantouch.com

Perfect Chair

®

Laptop Desk

keep it safe

WARNING:

• Do not place any food or drink on your Laptop Desk, as it may spill and cause injury or damage.

• Do not place any object that weighs more than 25 Lbs. on your Laptop Desk, as it will

permanently damage the unit.

Register your product at www.humantouch.com to ensure your product is

in our system to simplify the warranty process should you ever need it.

3

ENGLISH

humantouch.com

2

get ready

Installing your Perfect Chair Laptop Desk is easy! Simply remove the armrest, install

the mounting bracket, reinstall the armrest, then quickly assemble the mounting post.

Place your Laptop Desk on top of the mounting post, and you’re done!

Remove the right-hand armrest and accessory table (if any)

1. Using a Phillips-head screwdriver, remove the three screws that secure the right-hand armrest cap (screws are

located in two front corners and one in back (Fig.1).

2. Using the larger Allen wrench (provided), remove the four Allen screws from the underside of the right-hand

armrest core (Fig.1).

3. Discard the screws; retain the washers.

4. Remove the armrest core from the chair.

5. If you have a Perfect Chair accessory table attached to your chair, set it aside for later installation.

1. Using the larger Allen wrench (provided), remove the two screws that secure the silver armrest plate to the top of the

armrest support (Fig.2).

Install the mounting bracket

(Fig.2)

Silver armrest plate

Unpack the box, including the inner box containing small parts. Make sure you

have each of the following items:

TOOLS

Allen wrench

Wrench

HARDWARE

Screw (4)

ACCESSORIES

Edge stop (short)

(2)

Edge stop (tall)

(2)

Cable clip (2)

COMPONENTS

Mounting plate

Mounting post

Spacer plate

Post cap

Spacer (5)

Laptop desk

Unpack the box

Armrest cap

PC-420/600/610 armrest cap shown

(Fig.1)

Allen screw

Armrest core

Washer

Underside of the right-

hand armrest core

5

ENGLISH

humantouch.com

4

2. Remove the silver armrest plate and retain it for use should you ever remove your laptop desk.

3. Place the Laptop Desk mounting plate on top of the armrest support as shown (Fig.4).

4. Place the two screws and washers you removed earlier into the two center bracket holes, then tighten them using the

provided Allen wrench (Fig. 4).

5. If you cannot fully insert the screws into the holes, do the following:

a. Using a flat-head screwdriver, turn the barrel nut located on the back of the armrest so that the slot is

horizontal (Fig.5).

b. Standing above the armrest, visually inspect the screw holes to determine whether the screw holes are aligned with

the holes in the barrel nut; if they are not, use a Phillips-head screwdriver or a pen to align the bolt holes with the

screw holes.

c. Repeat step 4.

Armrest core

Armrest cap

Rear armrest

cap screw

Front armrest

cap screws

(Fig.7)

Barrel nut

(Fig.5)

Slot is horizontal

Allen screw (long)

Washer

Laptop Desk

mounting plate

(Fig.4)

Armrest core

(Fig.6)

Install the armrest core

Install the armrest cap

1. Place the armrest core into position (Fig 6).

2. Using two of the provided screws, install and partially tighten the rear armrest core screws.

3. If you have an accessory table, place it into position underneath the armrest core.

4. Using the other two provided screws, install and hand-tighten the two front armrest core screws.

5. Use the larger Allen wrench to moderately tighten all four screws.

1. Place the armrest cap into position, then replace the three screws to secure it.

7

ENGLISH

humantouch.com

6

Install the desk

1. Install the desired number of spacers onto the post, to position the desk at the desired height.

2. Place the Laptop Desk collar onto the post.

3. Place any unused spacers on top of the post for storage.

4. Place the post cap on top of the post.

Add spacer to increase the height

(maximum height with 5 spacers)

Cap

Install the mounting post

1. Hold the spacer plate with the pin facing down, align the pin with the corresponding hole on the mounting

plate, then insert the pin into the hole to secure the plate (Fig.8).

(Fig.8)

2. Hold the mounting post with the threads facing down,

align the pin on the bottom of the post with the outside

hole on the top of the spacer plate (Fig.9).

3. Install the nut (provided) onto the bottom of the post and use

the provided open wrench to tighten. Do not over-tighten (Fig.10).

Spacer plate

Mounting post

Spacer plate

(Fig.9)

Nut

Outside hole

of spacer plate

(Fig.11)

Complete desk installation

(Fig.10)

Place unused spacers on top for storage

Collar

(Fig.12)

9

ENGLISH

humantouch.com

8

take a seat

1. Pull the desk out and to the side, out of the way (Fig.13).

2. Take a seat.

3. Pull the table back toward you to the desired location (Fig.13).

4. Recline or incline your chair to the desired location. NOTE: You can recline approximately two-thirds of the full recline

range (depending on the height at which you installed the desk) while using your Laptop Desk (Fig.14).

SAFETY NOTE: Should you inadvertently recline to a full recline position, the Laptop Desk will automatically rise to

avoid trapping your legs between the chair and the desk.

(Fig.13)

Adjust the desk level

You can adjust your desk level up to two inches, to accommodate objects up to the maximum allowable 10 Lbs. at

a perfect level. For your safety, do not place any food or drink on the Laptop Desk.

1. While sitting in the chair, place the object you intend to use (laptop/iPad/book) on the desk. CAUTION: Do not place

any object that weighs more than 25 Lbs. on the desk, as permanent damage to the desk may occur.

2. Observe whether the desk needs to be raised or lowered to be level.

3. Lift the desk up slightly with one hand to relieve pressure on the leveling screw, then use your other hand to turn the

screw slightly clockwise to raise the desk or counterclockwise to lower it (Fig.15).

CAUTION: You must raise the desk before adjusting the leveling screw to avoid permanently damaging the desk.

NOTE: Do not remove the screw, as it is difficult to reinstall.

4. Repeat step 1-3 until the desk is level.

(Fig.15)

Lift the desk up slightly to relieve

pressure on the leveling screw

Leveling screw

(Fig.14)

Tension screw

11

ENGLISH

humantouch.com

10

Install the edge stops

Your Laptop Desk comes with two tall edge stops, for use with laptops, and two short edge stops, for use with iPads and

netbooks. These stops, combined with the holes along the inside edge of the desk, enable you to hold virtually any device

securely on the desk when the desk is tilted.

1. With the object you intend to use in place on the desk, determine whether the taller or shorter stops are best suited to

hold the object. Do not use more than two stops at one time.

2. Choose the desired location in which to install the first stop.

3. While squeezing the stop sides firmly toward each other, insert the ends into the corresponding desk holes and push the

stop inward halfway before releasing the stop sides (Fig.16).

NOTE: Repeated installation of the edge stops without squeezing the sides together will eventually enlarge the holes and

they will no longer hold the stops in place.

4. Push the stop the rest of the way into the holes, as far as you can.

5. Repeat steps 2 – 4 to install the other stop.

6. Once all desired stops are installed, slide the rubber bumpers up or down to the location that best protects the edges

of your device from becoming scratched.

7. Store the unused edge stops in a convenient place, so you can locate them when using a different device.

(Fig.16)

Adjust the desk tilt

Grasp the Laptop Desk with your hands on both sides, then tilt it forward, for optimal viewing angle.

Install the cable clips

If you are using an outlet-powered device, you can use the provided

cable clips to secure the device cables to the Laptop Desk arm,

conveniently out of the way.

1. Attach the first clip to the desk arm, underneath the desk.

2. Attach the second clip to the arm, near the bend.

3. Snap the cable into the cable guides on each clip.

Adjusting the desk arm tension

You can increase or decrease the desk arm tension, to make it easier

or more difficult to swivel the desk arm forward and backward.

1. While sitting in the chair, locate the tension screw on the desk post.

2. Turn the screw clockwise to increase the arm tension or

counterclockwise to decrease the tension.

Tension screw

Cable clip

Device cable

Edge stop installedSqueeze the stop sides

IMPORTANT: When removing the edge stops, be sure to squeeze the sides firmly toward each other before pulling the

stops out of the holes.

13

ENGLISH

humantouch.com

12

Speciﬁcations*

Laptop Desk Size: 18”L x 12”W

Laptop Desk Weight: 9 Lbs.

Maximum Load Weight: 25 Lbs.

*Specifications are subject to change without prior notice.

maintenance

Adjusting the table tilt tension

1. Lift the Laptop Desk off the post, then turn it upside down.

2. Remove the Allen wrench from the storage slot on the bottom

of the Laptop Desk, then use it to slightly tighten the tilt screws.

IMPORTANT: Do not over-tighten the screws or the desk

may break. Be sure to tighten the two screws equally.

3. Test the tension to ensure that is appropriately tight, and that

the table tilts smoothly. If the table does not tilt smoothly, you

likely did not tighten the screws equally.

Tension screws

Desk upside down

Adjusting the table swivel tension

1. Lift the desk off the post, then turn it upside down.

2. Remove the Allen wrench from the storage slot on the

bottom of the Laptop Desk, then use it to slightly tighten

the swivel screw.

Desk upside down

Swivel screw

After years of use, the table tilt and swivel tension screws may become loose and require tightening. Follow the steps in

this section carefully to perform this maintenance.

You can also quickly remove the laptop desk (minus the bracket) without completely uninstalling it.

1. Use the provided open wrench to remove the nut on the bottom of the mounting post.

2. Pull up on the Laptop Desk arm and mounting post to remove the unit from the chair.

The mounting bracket remains, for easy reinstallation.

Stowing the laptop desk

To stow the Laptop Desk, out of the way,

simply flip it over to the side of the chair.

Nut

Mounting bracket

Rotate the Laptop Desk to avoid interference

with the floor.

15

FRANÇAIS

humantouch.com

mode d’emploi et

d’entretien

Perfect Chair

®

Laptop Desk

www.humantouch.com/register

Enregistrez votre produit EN LIGNE dès maintenant

www.humantouch.com/register

Enregistrez votre produit EN LIGNE dès maintenant

soyez à votre meilleur. sentez-vous à votre meilleur.

MC

Page is loading ...

Human Touch Laptop Desk User manual

Human Touch Laptop Desk User manual

in other languages

Related papers

Other documents