2. Classic Accessories
  3. 32-013-010501-00

Classic Accessories 32-013-010501-00 Owner's manual

  • Hello! I've analyzed the Teton Float Tube specification. It provides the dimensions including length, width and height for the 'All' model. This document also specifies tolerances for those dimensions. If you have more questions about it, feel free to ask!
  • What is the overall length of the float tube?
    What is the overall width of the float tube?
    What is the overall height of the float tube?
Teton Float Tube
5/26/2010 Page 3 of 16
Part #
32-013-010501-00
Critical Dimensions
Model A B C
All 42.50 40.00 18.50
A. Overall Length
B. Overall Width
C. Overall Height
A
B
C
NOTE: Measurements taken
on a fully inated oat tube
Plus/Minus Tolerances
0 - 12”
13 - 24”
25 - 48”
49” and over
+/- 0.125” max
+/- 0.25” max
+/- 0.50” max
+/- 0.75” max
Please Note:
All Dimensions
are In Inches
Unless Noted
Otherwise
/