Krone Relief springs on the top link fork Operating instructions
- Type
- Operating instructions
Enclose this document with the operating instructions of the
machine.
Supplement to operating
instructions
Document number: 150001462_00_en
Version: 14/10/2020
for accessories kit:
B477 – Relief springs on the top link fork
Mowing technology
2Supplement to operating instructions 150001462_00_en
Contact
Maschinenfabrik Bernard Krone GmbH & Co. KG
Heinrich-Krone-Straße 10
48480 Spelle
Germany
Telephone main office + 49 (0) 59 77/935-0
Telefax main office + 49 (0) 59 77/935-339
Telefax spare parts warehouse na-
tional territory
+ 49 (0) 59 77/935-239
Telefax spare parts warehouse export + 49 (0) 59 77/935-359
Internet www.landmaschinen.krone.de
https://mediathek.krone.de/
Information for enquiries and orders
Year
Machine number
Type
Contact data of your dealer
Table of contents
Supplement to operating instructions 150001462_00_en 3
1 Information on this document ..................................................................................................4
1.1 Validity .........................................................................................................................................4
1.2 Re-ordering ..................................................................................................................................4
1.3 Applicable documents..................................................................................................................4
2 Safety ..........................................................................................................................................5
2.1 Meaning of the supplement to the operating instructions ............................................................5
3 Function description of top link fork........................................................................................6
4 Start-up .......................................................................................................................................7
4.1 Mounting top link fork...................................................................................................................7
Index............................................................................................................................................8
1 Information on this document
1.1 Validity
4 Supplement to operating instructions 150001462_00_en
1 Information on this document
1.1 Validity
This document is valid for:
Accessories kit: B477 – Relief springs on the top link fork
Machine type: EasyCut F 280 EasyCut F 280 M
EasyCut F 320 EasyCut F 320
EasyCut F 320 M EasyCut F 320 M
EasyCut F 360 M MT203-20 (EasyCut F 280 High-
land)
MT203-30 (EasyCut F 320 High-
land)
1.2 Re-ordering
You can request a replacement document if this document became completely or partly
unusable, or if you need it in a different language. Please specify the document number shown
on the cover page in your order. Alternatively, you can download the document online from
KRONE MEDIA https://media.krone.de.
1.3 Applicable documents
To ensure that the machine is used safely and as intended, observe the following further
applicable documents.
• Operating instructions of the respective machine
• Supplement to the operating instructions of the respective accessories kit
Safety 2
Meaning of the supplement to the operating instructions 2.1
Supplement to operating instructions 150001462_00_en 5
2 Safety
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
In order to avoid accidents, the relevant safety instructions in the operating instructions
must be read and observed.
WARNING
Risk of injury due to non-observance of safety routines
If the relevant safety routines are not observed, persons may be seriously injured or killed.
In order to avoid accidents, the safety routines in the operating instructions must be read
and observed.
INFO
Depending on the machine type, the basic safety instructions can be found in the chapter
“Safety”, “Basic Safety Instructions” or in the chapter “Safety” of the machine operating
instructions.
2.1 Meaning of the supplement to the operating instructions
The supplement to the operating instructions is an important document and a part of the
machine. It is aimed at the user and contains safety-relevant information.
If the supplement to the operating instructions is not observed, people may be seriously injured
or killed.
Read in full and observe the “Safety” chapter of the corresponding operating instructions
before using the machine for the first time,see Page4.
Before working, also read and observe the respective sections of the corresponding
operating instructions,see Page4.
Keep the supplement to the operating instructions ready to hand for the user of the machine.
Hand over the supplement to the operating instructions to subsequent users.
3 Function description of top link fork
6 Supplement to operating instructions 150001462_00_en
3 Function description of top link fork
1
2
KM001-117
The relief springs(2) of the front mounted mower are attached to the top link fork(1).
Start-up 4
Mounting top link fork 4.1
Supplement to operating instructions 150001462_00_en 7
4 Start-up
WARNING
Risk of injury due to failure to observe the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
To avoid accidents, the operating instructions must be read and observed.
Observe the warnings in the respective chapter of the operating instructions.
4.1 Mounting top link fork
WARNING
Danger to life caused by an incorrectly mounted top link fork
If a top link fork (1) has been mounted incorrectly, the threaded spindle may break and the
machine may disconnect unintentionally. This may result in serious accidents.
When mounting the top link fork, make sure that the rounded side (4) of the top link fork is
facing upwards and the fork (3) below the straight side is attached to the top link fork.
1
2
33
4
KMG000-062
INFO
The top link fork(1) can be ordered with the order number 204334520.
Screw the top link fork (1) into the top link (2) M30x3.5.
Alternatively, it is also possible to use a telescopic top link instead of a top link.
Fit the forks (3) below the straight side onto the top link fork.
Mount the top link fork with the rounded side (4) facing upwards on the tractor side.
Perform a visual inspection to check that the forks (3) are pointing downwards and the
rounded off side (4) of the top link fork is pointing upwards.
Index
8 Supplement to operating instructions 150001462_00_en
A
Applicable documents .......................................... 4
C
Contact ................................................................. 2
Contact data of your dealer .................................. 2
F
Function description of top link fork...................... 6
I
Information for enquiries and orders .................... 2
Information on this document ............................... 4
M
Meaning of the supplement to the operating
instructions ........................................................... 5
Mounting top link fork ........................................... 7
R
Re-ordering .......................................................... 4
S
Safety ................................................................... 5
Start-up................................................................. 7
V
Validity.................................................................. 4
Supplement to operating instructions 150001462_00_en 9
This page has been left blank deliberately.
Maschinenfabrik
Bernard Krone GmbH & Co. KG
*Heinrich-Krone-Straße 10
D-48480 Spelle
*Postfach 11 63
D-48478 Spelle
'+49 (0) 59 77 / 935-0
6+49 (0) 59 77 / 935-339
üwww.landmaschinen.krone.de
14/10/2020V.1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Krone Relief springs on the top link fork Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Krone Lower link extensions Operating instructions
-
-
Krone EzBA Hydraulisch klappbare Seitenschutze (B155) Operating instructions
-
-
-
-
-
-
-