2. Rugged Ridge
  3. 11503.89

Rugged Ridge 11503.89 Installation guide

  • I have reviewed the installation instructions for the Rugged Ridge CB Antenna Mount JK 11503.89. This guide provides step-by-step instructions on how to install the mount, including removing the spare tire and securing the mount using provided hardware. I am ready to answer your questions.
  • How many mounting holes does the CB Antenna mount have?
    What is the recommended torque for the bolts?
    What is the first step in the installation process?
Rev. 6/11 Page 1 of 1 SB
CB Antenna Mount JK
11503.89
For Technical Assistance Contact:
OMIX-ADA Tech Support
Phone: 1-800-449-6649
Email: techsuppor[email protected]
Web: www.Omix-Ada.com
PLEASE REVIEW ALL INSTRUCTIONS BEFORE YOU BEGIN.
Step 1. Remove the spare tire from your factory mount.
Step 2. Remove the (2) top right hand 13mm hex bolts from the spare tire mount.
Step 3. Install the CB Antenna Mount using the supplied hex bolts, lock washers,
at washers. Torque bolts to 10 ft-lbs. Remount the spare tire after CB
Antenna installation is complete.
Note: CB Antenna mount has (2) mounting holes. Either hole may be used .
Contents: (1) CB Antenna Mount
(2) 8 x 40mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
/