2. JIECANG
  3. JCHR35W3C

JIECANG JCHR35W3C User manual

  • Hello! I've analyzed the user manual for the JCHR35W3C3, JCHR35W3C4, and JCHR35W3C5 LCD Remote Controllers. This document explains how to use the controllers, including setting channels, groups, and adjusting shade positions. It also explains what to do when the LCD display is weak. I'm ready to answer your questions about the controllers' features and operation.
  • How do I toggle channels and groups?
    What does it mean when the LCD screen display is weak?
    How do I set a position percentage?
JCHR35W3C3/C4/C5
Hand-held LCD Remote Controller
User Manual
JCHR35W3C3
Application:Roller shade
JCHR35W3C3
16-channel LCD
remote controller
JCHR35W3C4
Application:Roller shade
JCHR35W3C4
16-channel dual control LCD
remote controller
JCHR35W3C5
Application:Venetian blind
JCHR35W3C5
16-channel LCD
remote controller
01 Product Info
02 Buttons
03 Parameters(more info please refer to the nameplate)
04 Caution!
05 Instructions
a.Channels & Groups Toggling
b.Number of Channels Setting
d.Channel in Group Setting
e.Check the Channels in Groups
f.Prohibit Dual-key Operation
g.Position Percent Setting
h.For other operations, please refer to the motor operation instruction
c.Number of Groups Setting
Shortpress ,ifyou
wanttheChannelinthe
group,theChannel
numberwillbesteady-lit.
Shortpress again,if
youwanttheChannelnot
inthegroup, theChannel
numberwillbeflashing.
Stop on the desired percentage down
and wait 3s. The shades will move to the
chosen percentage down position.
When the voltage is too low, the LCD screen digital display will be weak, prompting to
replace the battery.
NoteChannel 0 is the group control for all the channels.
/