2. Rugged Ridge
  3. 11504.32

Rugged Ridge 11504.32 Installation guide

  • Hello! I'm a chat assistant and I have reviewed the provided installation instructions for the XHD Rock Sliders designed for the JL Wrangler (4 Door). The document outlines the necessary hardware, including M8 and M6 bolts, washers and lock nuts, and provides a step-by-step guide for installing the rock sliders. I am ready to answer any questions you may have about the installation process or the product itself.
  • What type of vehicle is this product designed for?
    What hardware is used for installation in body mounting holes?
    What are the first steps to install rock sliders?
Copyright © 2018 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 844-270-0593 | www.Omix-ADA.com
XHD Rock Sliders, JL Wrangler (4 Door)
Page 1/2
Part # 11504.32
1. Rock Slider - Right (1)
2. Rock Slider - Left (1)
3. M8 Bolt (6)
4. M8 Lock Washer (6)
5. M8 Flat Washer (6)
6. M6 Lock Nut (12)
7. M6 Flat Washer (12)
Components
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL: [email protected]
Copyright © 2018 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 844-270-0593 | www.Omix-ADA.com
XHD Rock Sliders, JL Wrangler (4 Door)
Page 2/2
3. Install supplied M6 hardware on studs of Rock Slider
and tighten until Rock Slider ts snug against body.
4. Tighten M8 hardware.
2. Loosely install supplied M8 hardware in each body
mounting hole.
1. With help of another person, guide Rock Slider on
side of body. Ensure M6 studs go through holes in
pinch seam.
/