Safety and Instruction Manual
7
Helpline: +44 (0) 844 984 0055
GETTING STARTED
How to use your Multi cooker for Rice
Measure out your required amount of rice using the measuring cups provided,
then wash your rice under cold water. Place washed rice into the cooking pot
and place the required amount of water into the cooking pot, following the
measuring guide inside the cooking pot, place the small vent glass cooking lid
on top. If you are using the Pre-set function, press the pre-set button first and set
your pre-set time before starting the Rice function. Now press your menu button
to choose the rice function, after 5 seconds the cooking function will start, once
the cycle expires the keep warm function will automatically start, you can press
cancel at any time to stop this and go to standby mode.
How to use your Multi cooker to Steam
Firstly add water to the cooking pot to the minimum water fill level, this may
vary depending on the amount of food that you are steaming. Using your
steam bowl (5) place the produce that will need the most intense steaming i.e.:
potatoes in this receptacle, then add the next tier, the steam tray (6) and place
your vegetables into this, finally place the steam rack (9) on top and place your
salmon fillets on top of this. Now place the small vent glass cooking lid on top.
By pressing the menu button, select the steam function, after 5 seconds this
will start the steaming process. If steaming chicken place the meat on the lower
level of the steam tier, this will prevent juices running into the vegetables.
How to use your Multi cooker to Sauté/Slow Cook
Firstly place stirrer inside the cooking pot and fix into place, put your desired
produce into the cooking pot, along with a stock if slow cooking. Place the small
vent glass lid on the cooking pot. Press menu button until you reach the Sauté/
Slow cook function then in 5 secs this will proceed, if you require the stirrer to
be used in this process press the stirrer button at anytime once the function has
started. If you are using diced meat in your recipe, please brown & seal the meat
prior to placing it with rest of the ingredients.